| Standard |
Official Title of Standard |
|
| BS 2000-12:1993 |
Methods of test for petroleum and its products. Determination of specific energy |
| BS 2000-121:2002 |
Methods of test for petroleum and its products. Determination of oil separation from lubricating grease. Pressure filtration method |
| BS 2000-129:1993 |
Methods of test for petroleum and its products. Determination of bromine number. Colour indicator titration method |
| BS 2000-13:1994 |
Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Conradson method |
| BS 2000-130:1998 |
Methods of test for petroleum and its products. Petroleum products. Determination of bromine number of distillates and aliphatic olefins. Electrometric method |
| BS 2000-132:1996 |
Methods of test for petroleum and its products. Petroleum products. Lubricating grease. Determination of dropping point |
| BS 2000-133:1993 |
Methods of test for petroleum and its products. Determination of drop melting point of wax and petrolatum |
| BS 2000-135:1993 |
Methods of test for petroleum and its products. Determination of rust-preventing characteristics of steam-turbine oil in the presence of water |
| BS 2000-136.1:1998 |
Methods of test for petroleum and its products. Determination of saponification number. Colour-indicator titration method. Section 136.1: Colour-indicator titration method |
| BS 2000-136.2:1999 |
Methods of test for petroleum and its products. Determination of saponification number. Potentiometric titration method. Section 136.2: Potentiometric titration method |
| BS 2000-137:1993 |
Methods of test for petroleum and its products. Determination of oil content of water mix metalworking oil dilutions |
| BS 2000-138:2000 |
Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method |
| BS 2000-139:1998 |
Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method |
| BS 2000-14:1994 |
Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Ramsbottom method |
| BS 2000-142:1993 |
Methods of test for petroleum and its products. Determination of oxidation stability of lubricating grease. Oxygen bomb method |
| BS 2000-143:2001 |
Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products |
| BS 2000-146:2000 |
Methods of test for petroleum and its products. Determination of foaming characteristics of lubricating oils |
| BS 2000-149:1993 |
Methods of test for petroleum and its products. Petroleum products. Lubricating oils and additives. Determination of phosphorus content. Quinoline phosphomolybdate method |
| BS 2000-15:1995 |
Methods of test for petroleum and its products. Petroleum products. Determination of pour point |
| BS 2000-156:1997 |
Methods of test for petroleum and its products. Liquid petroleum products. Determination of hydrocarbon types. Fluorescent indicator adsorption method |
| BS 2000-163:1996 |
Methods of test for petroleum and its products. Petroleum products. Lubricating oils and additives. Determination of sulfated ash |
| BS 2000-168:1995 |
Methods of test for petroleum and its products. Determination of rolling bearing performance of lubricating grease |
| BS 2000-179:1993 |
Methods of test for petroleum and its products. Determination of cone penetration of petrolatum |
| BS 2000-182:1993 |
Methods of test for petroleum and its products. Determination of inorganic acidity of petroleum products. Colour indicator titration method |
| BS 2000-19:2002 |
Methods of test for petroleum and its products. Determination of demulsibility characteristics of lubricating oil |
| BS 2000-195:1998 |
Methods of test for petroleum and its products. Determination of distillation characteristics of volatile organic liquids |
| BS 2000-196:1997 |
Methods of test for petroleum and its products. Petroleum products. Determination of colour (ASTM scale) |
| BS 2000-2:1998 |
Methods of test for petroleum and its products. Petroleum products and hydrocarbon solvents. Determination of aniline point and mixed aniline point |
| BS 2000-213:1993 |
Methods of test for petroleum and its products. Determination of neutralization value of bitumen. Colour indicator titration method |
| BS 2000-220:1998 |
Methods of test for petroleum and its products. Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases |
| BS 2000-223:1993 |
Methods of test for petroleum and its products. Determination of ash of petroleum products containing mineral matter |
| BS 2000-27:1993 |
Methods of test for petroleum and its products. Determination of distillation characteristics of cutback bitumen |
| BS 2000-272:2000 |
Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method |
| BS 2000-274:1999 |
Methods of test for petroleum and its products. Petroleum products. Aviation and distillate fuels. Determination of electrical conductivity |
| BS 2000-276:1995 |
Methods of test for petroleum and its products. Petroleum products. Determination of base number. Perchloric acid potentiometric titration method |
| BS 2000-280:1999 |
Methods of test for petroleum and its products. Petroleum products and lubricants. Inhibited mineral turbine oils. Determination of oxidation stability |
| BS 2000-281:1993 |
Methods of test for petroleum and its products. Determination of anti-wear properties of hydraulic fluids. Vane pump method |
| BS 2000-284:1993 |
Methods of test for petroleum and its products. Determination of saponifiable and unsaponifiable matter in oils, fats and waxes |
| BS 2000-306:1994 |
Methods of test for petroleum and its products. Determination of oxidation stability of straight mineral oil |
| BS 2000-313:2001 |
Methods of test for petroleum and its products. Determination of air release of lubricating and hydraulic oils |
| BS 2000-315:1998 |
Methods of test for petroleum and its products. Petroleum products. Electrical insulating oils. Detection of corrosive sulfur |
| BS 2000-317:1995 |
Methods of test for petroleum and its products. Determination of residues in liquefied petroleum gases. Low temperature evaporation method |
| BS 2000-342:2000 |
Methods of test for petroleum and its products. Determination of thiol (mercaptan) sulfur in light and middle distillate fuels. Potentiometric method |
| BS 2000-346:1996 |
Methods of test for petroleum and its products. Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions. |
| BS 2000-35:1993 |
Methods of test for petroleum and its products. Determination of open flash and fire point. Pensky-Martens method |
| BS 2000-356:1999 |
Methods of test for petroleum and its products. Crude petroleum. Determination of water. Potentiometric Karl Fischer titration method |
| BS 2000-375:1999 |
Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination by hot filtration |
| BS 2000-377:1995 |
Methods of test for petroleum and its products. Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively coupled plasma emission and atomic absorption spectroscopy methods |
| BS 2000-381:1997 |
Methods of test for petroleum and its products. Aviation fuels. Estimation of net specific energy |
| BS 2000-386:1999 |
Methods of test for petroleum and its products. Crude petroleum. Determination of water. Coulometric Karl Fischer titration method |
| BS 2000-390:1994 |
Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination using standard procedures for ageing |
| BS 2000-397:1995 |
Methods of test for petroleum and its products. Recovery of bitumen binders. Dichloromethane extraction rotary film evaporator method |
| BS 2000-412:1996 |
Methods of test for petroleum and its products. Petroleum products. Determination of water separability of petroleum oils and synthetic fluids |
| BS 2000-413:1996 |
Methods of test for petroleum and its products. Petroleum products. Low levels of vanadium in liquid fuels. Determination by flameless atomic absorption spectrometry after ashing |
| BS 2000-414:1996 |
Methods of test for petroleum and its products. Industrial quenching oils. Determination of cooling characteristics. Nickel-alloy probe test method |
| BS 2000-431:1998 |
Methods of test for petroleum and its products. Petroleum products. Determination of acid number. Semi-micro colour-indicator titration method |
| BS 2000-448.2:1999 |
Methods of test for petroleum and its products. Determination of the filterability of lubricating oils. Procedure for dry oils. Section 448.2: Procedure for dry oils |
| BS 2000-450:2000 |
Methods of test for petroleum and its products. Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method |
| BS 2000-454:2000 |
Methods of test for petroleum and its products. Determination of phosphorus in gasoline. Spectrophotometric method |
| BS 2000-455:2000 |
Methods of test for petroleum and its products. Determination of manganese in gasoline. Atomic absorption spectrometry (AAS) method |
| BS 2000-456:2000 |
Methods of test for petroleum and its products. Determination of potassium in gasoline. Atomic absorption spectrometry (AAS) method |
| BS 2000-48:1997 |
Methods of test for petroleum and its products. Determination of oxidation characteristics of lubricating oil |
| BS 2000-50:1993 |
Methods of test for petroleum and its products. Determination of cone penetration of lubricating grease |
| BS 2000-57:1995 |
Methods of test for petroleum and its products. Petroleum products. Determination of the smoke point of kerosine |
| BS 2000-61:1999 |
Methods of test for petroleum and its products. Determination of sulfur. High pressure combustion method |
| BS 2000-71.2:1995 |
Methods of test for petroleum and its products. Kinematic viscosity. Specifications and operating instructions for glass capillary kinematic viscometers |
| BS 2000-74:2000 |
Methods of test for petroleum and its products. Petroleum products and bituminous materials. Determination of water. Distillation method |
| BS 2000-76:1993 |
Methods of test for petroleum and its products. Determination of congealing point of waxes and petrolatum |
| BS 2003:1974 |
Specification for mild steel drums (light duty: removable heads) |
| BS 2006:1984 |
Specification for aluminium collapsible tubes |
| BS 2007:1975 |
Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements |
| BS 2011:Part 2.2Z/AFc and Z/BFc:1986 |
Environmental testing. Guidance. Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests |
| BS 2011-2.1Fda:1973 |
Environmental testing. Tests. Test Fda. Random vibration - wide band reproducibility high |
| BS 2011-2.1J:1989 |
Environmental testing. Tests. Test J and guidance. Mould growth |
| BS 2011-2.1T:1981 |
Environmental testing. Tests. Test T. Soldering |
| BS 2011-2.1Ta:1989 |
Environmental testing. Tests. Test Ta. Soldering. Solderability testing by the wetting balance method |
| BS 2011-2.1Td:1990 |
Environmental testing. Tests. Test Td. Solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| BS 2011-2.2Kd:1984 |
Environmental testing. Guidance. Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections |
| BS 2011-5.1:1991 |
Environmental testing. Guide to drafting of test methods. General principles |
| BS 2015:1992 |
Glossary of paint and related terms |