| Standard |
Official Title of Standard |
|
| BS 2035:1966 |
Specification for cast iron flanged pipes and flanged fittings |
| BS 2037:1994 |
Specification for portable aluminium ladders, steps, trestles and lightweight stagings |
| BS 2043:1968 |
Method for the determination of wool fibre fineness by the use of a projection microscope |
| BS 2045:1965 |
Preferred numbers |
| BS 2048-1:1961 |
Specification for dimensions of fractional horse-power motors. Dimensions of motors for general use |
| BS 2049:1976 |
Specification for kerosine (paraffin) lighting appliances for domestic use |
| BS 2049:1985 |
Specification for paraffin lighting appliances for domestic use |
| BS 2050:1978 |
Specification for electrical resistance of conducting and antistatic products made from flexible polymeric material |
| BS 2051-1:1973 |
Tube and pipe fittings for engineering purposes. Copper and copper alloys capillary and compression tube fittings for engineering purposes |
| BS 2051-2:1984 |
Tube and pipe fittings for engineering purposes. Specification for olive type copper alloy compression tube fittings |
| BS 2054:1953 |
Specification for augers and auger bits |
| BS 2058:1961 |
Specification for Lunge-Rey weighing pipette |
| BS 2059/1:1957 |
Summary sheet: straight sided splines. Bottom fitting. Shallow |
| BS 2059/2:1957 |
Summary sheet: straight sided splines. Bottom fitting. Deep |
| BS 2059/3:1957 |
Summary sheet: straight sided serrations. Internal and external |
| BS 2059:1953 |
Specification for straight-sided splines and serrations |
| BS 2061:1953 |
Specification for phosphor bronze spring washers for general engineering purposes |
| BS 2062-1:1959 |
Specification for gear hobs. Hobs for general purposes, 1 d.p. to 20 d.p. inclusive |
| BS 2062-2:1960 |
Specification for gear hobs. Hobs for gears for turbine reduction and similar drives |
| BS 2064-1:1976 |
Diamond and products. Specification for diamond and cubic boron nitride abrasive grinding wheels |
| BS 2064-2:1976 |
Diamond abrasive products. Specification for diamond abrasive circular saws and frame saws |
| BS 2067:1953 |
Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method) |
| BS 2068:1970 |
Specification for acetic anhydride |
| BS 2069:1954 |
Specification for gas sampling tubes |
| BS 2071:1989 |
Specification for Soxhlet extractors |
| BS 2081-1:1998 |
Closets for use with chemicals. Specification for portable closets |
| BS 2081-2:1998 |
Closets for use with chemicals. Specification for permanently installed closets |
| BS 2087-1:1992 |
Preservative textile treatments. Specification for treatments |
| BS 2087-2:1992 |
Preservative textile treatments. Methods of test |
| BS 2090:1954 |
Specification for hook spanners, peg spanners, coupling wrenches and the related slots, holes and horns |
| BS 2096:1954 |
Method of testing oil-fired rotary dryers for use in asphalt and coated macadam plant |
| BS 2099:1989 |
Specification for castors for hospital equipment |
| BS 21:1985 |
Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions) |
| BS 215-1:1970 |
Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission. Aluminium stranded conductors |
| BS 215-2:1970 |
Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission. Aluminium conductors, steel-reinforced |
| BS 227:1995 |
Specification for H-section steel arches for use in mines |
| BS 228:1994 |
Specification for short-pitch transmission precision roller chains and chain wheels |
| BS 235:1987 |
Specification for gears for electric traction |
| BS 245:1976 |
Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes |
| BS 2452:1954 |
Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes) |
| BS 2453:1973 |
Specification for steel wire for spokes |
| BS 2456:1990 |
Specification for floats (plastics) for float operated valves for cold water services |
| BS 2457:1975 |
Specification for protractors for drawing office use |
| BS 2459:1974 |
Specification for set squares (fixed and adjustable) for drawing office use |
| BS 2461:1983 |
Specification for gas washing bottles |
| BS 2463-1:1990 |
Transfusion equipment for medical use. Specification for collapsible containers for blood and blood components |
| BS 2463-2:1989 |
Transfusion equipment for medical use. Specification for administration sets |
| BS 2464:1954 |
Specification for hose couplings for petrol, oil and lubricants ($9L in. to 4 in. nominal sizes) |
| BS 2464-2:1969 |
Specification for hose couplings for petrol, oil and lubricants. High pressure couplings |
| BS 2464-3:1968 |
Specification for hose couplings for petrol, oil and lubricants. Quick-acting couplings |
| BS 2464-4:1980 |
Hose couplings for petrol, oil and lubricants. Specification for 100 mm quick-acting couplings: European type |
| BS 2468-1:1994 |
Glossary of terms and classification relating to agricultural machinery and implements. Power and tractive units |
| BS 2468-3:1995 |
Glossary of terms and classification relating to agricultural machinery and implements. Soil working equipment |
| BS 2470:1973 |
Specification for hexagon socket screws and wrench keys. Inch series |
| BS 2471:2005 |
Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area |
| BS 2472:1966 |
Methods for the chemical analysis of ice cream |
| BS 2474:1993 |
Recommendations for names for chemicals used in industry |
| BS 248:1969 |
Specification for light rails and fishplates for use at mines |
| BS 2482:1981 |
Specification for timber scaffold boards |
| BS 2483:1977 |
Specification for overbed tables |
| BS 2484:1985 |
Specification for straight concrete and clayware cable covers |
| BS 2485:1987 |
Specification for tee slots, tee bolts, tee nuts and tenons |
| BS 2486:1997 |
Recommendations for treatment of water for steam boilers and water heaters |
| BS 2488:1966 |
Schedule of preferred numbers for the resistance of resistors and the capacitance of capacitors for telecommunication equipment |
| BS 2499-2:1992 |
Hot-applied joint sealant systems for concrete pavements. Code of practice for the application and use of joint sealants |
| BS 2499-3:1993 |
Hot-applied joint sealant systems for concrete pavements. Methods of test |
| BS 2501:1992 |
Specification for commercial refrigerated storage cabinets of the closed reach-in type |
| BS 2502:1979 |
Specification for manufacture of sectional cold rooms (walk-in type) |
| BS 2511:1970 |
Methods for the determination of water (Karl Fischer method) |
| BS 2518-1:1954 |
Specification for rotary form relieved gear cutters. Diametral pitch |
| BS 2518-2:1977 |
Specification for rotary form relieved gear cutters. Metric module |
| BS 2519-2:1976 |
Glossary for gears. Notation |
| BS 2520:1983 |
Specification for barometer conventions and tables, their application and use |
| BS 2523:1966 |
Specification for lead-based priming paints |
| BS 2538:1954 |
Specification for air-cooled flameproof single-phase lighting transformer units supplied from high voltage systems |
| BS 2540:1991 |
Specification for granular desiccant silica gel |
| BS 2543:2004 |
Upholstery fabrics for end use applications. Classification |
| BS 2548:1986 |
Specification for wood wool for general packaging purposes |
| BS 2554:1987 |
Specification for Westergren tubes and support for the measurement of erythrocyte sedimentation rate |
| BS 2556:1973 |
Specification for hand and breast drills |