| Standard |
Official Title of Standard |
|
| BS 2S 514:1969 |
Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding) |
| BS 2S 515:1969 |
Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding) |
| BS 2S 92:1964 |
Specification for aircraft material. Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in) |
| BS 2S 93:1964 |
Specification for aircraft material. '40' carbon steel (normalized) (35/45 tonf/sq in: limiting ruling section 6 in) |
| BS 2S 97:1964 |
Specification for aircraft material. 2$9H per cent nickel-chromium-molybdenum steel (65/75 tonf/sq in: limiting ruling section 6 in) |
| BS 2S 98:1964 |
Specification for aircraft material. 2$9H per cent nickel-chromium-molybdenum steel (high carbon) (75/85 tonf/sq in: limited ruling section 6 in) |
| BS 2SP 1:1927 |
Specification for aircraft material. Shackles |
| BS 2SP 101-104:1956 |
Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads) for aircraft |
| BS 2SP 105:1955 |
Specification for swaged cable-end assemblies (Unified threads) for preformed steel wire rope (W.9) for aircraft |
| BS 2SP 106:1955 |
Specification for swaged cable-end assemblies (Unified threads) for preformed non-corrodible steel wire rope (W.11) for aircraft |
| BS 2SP 142 and SP 143:1973 |
Specification for solid rivets with 100$0D countersunk truncated radiused head made from BS L 86 (SP 142) and BS L 37 (SP 143) materials |
| BS 2SP 148-150:1979 |
Specification for Unified aluminium alloy washers |
| BS 2SP 151-153:1979 |
Specification for Unified alloy steel washers |
| BS 2SP 154-156:1979 |
Specification for Unified corrosion-resistant steel washers |
| BS 2SP 157-163:1973 |
Specification for solid rivets with universal head made from BS L 86 (SP 157 and 163), BS L 58 (SP 160 and 161), BS L 37 (SP 162) and DTD 204 (SP 158 and 159) materials |
| BS 2SP 47:1957 |
Single coil spring washers for aircraft |
| BS 2SP 68 to 2SP 71:1973 |
Specification for 100$0D countersunk precision head aluminium and aluminium alloy rivets |
| BS 2SP 7:1943 |
Specification for aircraft material. Fork joints (high tensile type) (for sizes No. 4 B.A. to $9L inch B.S.F. inclusive) |
| BS 2SP 77 to 2SP 80:1973 |
Specification for snap head aluminium and aluminium alloy rivets |
| BS 2SP 81 and 2SP 82:1973 |
Specification for snap head high nickel-copper alloy rivets |
| BS 2SP 83 to 85:1973 |
Specification for mushroom head aluminium alloy rivets |
| BS 2SP 87 and 2SP 88:1973 |
Specification for 100$0D countersunk head high nickel-copper alloy rivets |
| BS 2SP 91-92:1973 |
Specification for carbon steel worm drive clamps for aircraft |
| BS 2SP 93:1974 |
Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use |
| BS 2SP 95:1974 |
Specification for elastomeric grommets (polychloroprene) for aerospace use |
| BS 2SP 96:1982 |
Specification for internal retaining rings (imperial sizes) |
| BS 2T 57:1972 |
Specification for 4/1 nickel-chromium steel tube (1150 N/mm$u2) |
| BS 2T 66:1980 |
Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable) |
| BS 2T 68:1980 |
Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable) |
| BS 2TA 1:1974 |
Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa) |
| BS 2TA 10:1974 |
Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa) |
| BS 2TA 100:1973 |
Procedure for inspection and testing of wrought titanium and titanium alloys |
| BS 2TA 11:1974 |
Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 12:1974 |
Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 13:1974 |
Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 2:1973 |
Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 N/mm$u2) |
| BS 2TA 21:1973 |
Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa) |
| BS 2TA 22:1973 |
Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm$u2) |
| BS 2TA 23:1973 |
Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm$u2) |
| BS 2TA 24:1973 |
Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm$u2) |
| BS 2TA 28:1974 |
Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) |
| BS 2TA 3:1973 |
Specification for bar and section for machining of commercially pure titanium (tensile strength 390-540 N/mm$u2) |
| BS 2TA 4:1973 |
Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mm$u2) |
| BS 2TA 5:1973 |
Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mm$u2) |
| BS 2TA 6:1973 |
Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 N/mm$u2) |
| BS 2TA 7:1973 |
Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mm$u2) |
| BS 2TA 8:1973 |
Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm$u2) |
| BS 2TA 9:1973 |
Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm$u2) |
| BS 2V 35:1966 |
Specification for plywood for aeronautical purposes |
| BS 2V 37:1968 |
Specification for Sitka spruce as finished timber |
| BS 2W 11:1967 |
Specification for aircraft material. Preformed corrosion-resisting steel wire rope |
| BS 2W 12:1989 |
Specification for preformed zinc coated carbon steel wire rope (metric and inch series) |
| BS 2X 26:2001 |
Doping and finishing schemes for fabric covered aircraft |
| BS 2X 27:1991 |
Specification for cellulose finishing scheme for aerospace purposes |
| BS 2X 32:1998 |
Specification for pre-treatment etch primer for aerospace purposes |
| BS 2X 33:1998 |
Specification for two component epoxy primer for aerospace purposes |
| BS 2X 34:1998 |
Specification for two component polyurethane finish for aerospace purposes |
| BS 2X 35:2003 |
Selectively removable intermediate coating for aerospace purposes |
| BS 3012:1970 |
Specification for low and intermediate density polythene sheet for general purposes |
| BS 3015:1991 |
Glossary of terms relating to mechanical vibration and shock |
| BS 302-3:1987 |
Stranded steel wire ropes. Specification for zinc coated ropes for ships |
| BS 302-5:1987 |
Stranded steel wire ropes. Specification for ropes for hauling purposes |
| BS 302-7:1989 |
Stranded steel wire ropes. Specification for large diameter ropes for general purposes |
| BS 302-8:1989 |
Stranded steel wire ropes. Specification for higher breaking load ropes |
| BS 3031:1996 |
Specification for sulfuric acid used in lead-acid batteries |
| BS 3036:1958 |
Specification. Semi-enclosed electric fuses (ratings up to 100 amperes and 240 volts to earth) |
| BS 3037-1:1958 |
Specification for tyres for crane rail wheels. Double-flanged parallel-tread tyres |
| BS 3037-2:1975 |
Specification for tyres for crane rail wheels. Forged or rolled steel double flanged rail wheels and tyres (metric units) |
| BS 3041-1:1977 |
Radio-frequency connectors. Specification for general requirements and measuring methods |
| BS 3041-12:1981 |
Radio-frequency connectors. Specification for r.f. coaxial connectors with screw coupling, unmatched (type UHF) |
| BS 3041-2:1977 |
Radio-frequency connectors. Specification for coaxial unmatched connector |
| BS 3041-7:1996 |
Radio-frequency connectors. R.F. coaxial connectors with inner diameter of output conductor 9,5 mm (0,374 in) with bayonet lock. Characteristic impedance 50 ohms (Type C) |
| BS 3043:1973 |
Specification for storage envelopes for processed X-ray films for medical radiography |
| BS 3044:1990 |
Guide to ergonomics principles in the design and selection of office furniture |
| BS 3046:1981 |
Specification for adhesives for hanging flexible wallcoverings |
| BS 3047:1988 |
Specification for sizes of posters |
| BS 3054:1959 |
Specification for fireman's axe with rubber insulated handle |
| BS 3056-1:1985 |
Sizes of refractory bricks. Specification for multi-purpose bricks |
| BS 3056-2:1985 |
Sizes of refractory bricks. Specification for bricks for use in glass-melting furnaces |
| BS 3056-3:1986 |
Sizes of refractory bricks. Specification for bricks for rotary cement kilns |