| Standard |
Official Title of Standard |
|
| BS 3455:1973 |
Glossary of terms used in nuclear science and technology |
| BS 3456-202.46:1990 |
Specification for safety of household and similar electrical appliances. Particular requirements. Specification for safety of household and similar electrical appliances. Particular requirements. |
| BS 3457:1973 |
Specification for materials for water tap and stopvalve seat washers |
| BS 3459:1985 |
Specification for stands for drawing boards |
| BS 3463:1975 |
Specification for observation and gauge glasses for pressure vessels |
| BS 3466:1962 |
Methods of test for resistance per unit length of metallic electrical resistance material |
| BS 3467:1962 |
Method of test for temperature coefficient of resistance of alloy wire for precision resistors |
| BS 3469:1985 |
Specification for instrument precision rolling bearings (ball bearings) |
| BS 3470:1975 |
Specification for field gates and posts |
| BS 3473-1:1991 |
Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali |
| BS 3473-2:1987 |
Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of glass grains at 98$0DC |
| BS 3473-3:1987 |
Chemical resistance of glass used in the production of laboratory glassware. Method for determination of hydrolytic resistance of glass grains at 121$0DC |
| BS 3473-4.1:1989 |
Chemical resistance of glass used in the production of laboratory glassware. Methods for determination of hydrolytic resistance of the interior surfaces of glass containers. |
| BS 3473-4.2:1989 |
Chemical resistance of glass used in the production of laboratory glassware. Methods for determination of hydrolytic resistance of the interior surfaces of glass containers. |
| BS 3473-5:1987 |
Chemical resistance of glass used in the production of laboratory glassware. Method for determination of resistance of glass to attack by 6 mol/L hydrochloric acid at 100$0DC |
| BS 3475:1976 |
Specification for bowl stands for use in hospitals |
| BS 3482-1:1991 |
Methods of test for desiccants. Sampling, and preparation and storage of test samples |
| BS 3482-10:1991 |
Methods of test for desiccants. Determination of bulk density (dry basis) |
| BS 3482-11:1991 |
Methods of test for desiccants. Determination of friability and dust content |
| BS 3482-2:1991 |
Methods of test for desiccants. Determination of moisture content |
| BS 3482-3:1991 |
Methods of test for desiccants. Determination of pH |
| BS 3482-4:1991 |
Methods of test for desiccants. Determination of water-soluble chlorides content |
| BS 3482-5:1991 |
Methods of test for desiccants. Determination of water-soluble sulphates content |
| BS 3482-6:1991 |
Methods of test for desiccants. Determination of adsorptive capacity |
| BS 3482-7:1991 |
Methods of test for desiccants. Determination of particle size |
| BS 3482-8:1991 |
Methods of test for desiccants. Estimation of ammonia and ammonium compounds content |
| BS 3482-9:1991 |
Methods of test for desiccants. Determination of cobalt chloride content |
| BS 3483-0:1990 |
Methods for testing pigments for paints. General introduction |
| BS 3483-A1:1983 |
Methods for testing pigments for paints. Comparison of colour |
| BS 3483-A7:1994 |
Methods for testing pigments for paints. Colorimetric method for the comparison of the colours, in full-shade systems, of white, black and coloured pigments |
| BS 3483-B3:1982 |
Methods for testing pigments for paints. Determination of residue on sieve (water method, using a manual procedure) |
| BS 3483-C3:1982 |
Methods for testing pigments for paints. Determination of acidity or alkalinity of the aqueous extract |
| BS 3483-C7:1980 |
Methods for testing pigments for paints. Comparison of resistance to bleeding |
| BS 3483-C8:1980 |
Methods for testing pigments for paints. Comparison of heat stability |
| BS 3484-1:1991 |
Record inks. Specification for blue-black inks |
| BS 3484-2:1994 |
Record inks. Specification for permanent inks |
| BS 3486-1:1996 |
Specification for wheels for agricultural machinery, implements and trailers. Specification for wheel-to-hub fixing dimensions |
| BS 3487-4:1988 |
Tracheal tubes. Specification for tubes of the Cole type |
| BS 3488:1987 |
Specification for technical anhydrous lanolin |
| BS 3492:1987 |
Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels |
| BS 350:2004 |
Conversion factors for units |
| BS 3502-3:1993 |
Symbols for plastics and rubber materials. Schedule for symbols for compounding ingredients |
| BS 3504:1962 |
Specification for magnesium-activated nickel for cathodes of electronic tubes and valves |
| BS 3505:1986 |
Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water |
| BS 3506:1969 |
Specification for unplasticized PVC pipe for industrial uses |
| BS 3507:1976 |
Specification. Orthodontic wire and tape and dental ligature wire |
| BS 3509:1962 |
Specification for spirit level vials |
| BS 3510:1968 |
Specification for a basic symbol to denote the actual or potential presence of ionizing radiation |
| BS 3517:1991 |
Methods for thermal shock tests on laboratory glassware |
| BS 3518-1:1993 |
Methods of fatigue testing. Methods of fatigue testing. Guide to general principles |
| BS 3518-2:1962 |
Methods of fatigue testing. Rotating bending fatigue tests |
| BS 3518-3:1963 |
Methods of fatigue testing. Direct stress fatigue tests |
| BS 3520:1962 |
Specification for dental wrought precious metal alloy wire |
| BS 3521-1:1991 |
Terms relating to ophthalmic lenses and spectacle frames. Glossary of terms relating to ophthalmic lenses |
| BS 3521-2:1991 |
Terms relating to ophthalmic lenses and spectacle frames. Glossary of terms relating to spectacle frames |
| BS 3522:1962 |
Specification for hypodermic surgical mounted needles (Luer fitting) |
| BS 3523:1991 |
Specification for granular desiccant silica gel impregnated with cobalt chloride |
| BS 3529:1962 |
Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines |
| BS 3531-11:1991 |
Implants for osteosynthesis. Implants for osteosynthesis. Specification for staples with parallel legs |
| BS 3531-14.2:1990 |
Implants for osteosynthesis. Intramedullary nailing systems. Specification for medullary pins (Rush type) and introducer/extractors |
| BS 3531-15:1992 |
Implants for osteosynthesis. Specification for devices for the fixation of the ends of the femur in adults |
| BS 3531-23.1:1991 |
Implants for osteosynthesis. Bone plates. Method for determination of bending strength and stiffness |
| BS 3531-23.2:1993 |
Implants for osteosynthesis. Bone plates. Specification for holes and slots for use with screws of 4,5 mm, 4,2 mm, 4,0 mm, 3,9 mm, 3,5 mm and 2,9 mm nominal sizes |
| BS 3531-23.3:1991 |
Implants for osteosynthesis. Bone plates. Specification for holes corresponding to screws with asymmetrical thread and spherical undersurfaces |
| BS 3531-5.1:1997 |
Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for keys for use with screws having heads with hexagon socket |
| BS 3531-5.2:1990 |
Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for screwdrivers for screws having heads with single slot, cruciate slot or cross-recess |
| BS 3531-5.3:1991 |
Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for the dimensions of screws having hexagonal drive connection, spherical under-surfaces and asymmetrical thread |
| BS 3531-5.4:1993 |
Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for screws having symmetrical and asymmetrical thread and conical undersurfaces |
| BS 3531-5.5:1990 |
Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for taps and drills |
| BS 3531-5.6:1991 |
Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for the mechanical requirements and test methods for screws having asymmetrical thread and spherical undersurface |
| BS 3531-5.7:1991 |
Implants for osteosynthesis. Bone screws and auxiliary equipment. Specification for drill bits, taps and countersink cutters |
| BS 3531-6.1:1990 |
Implants for osteosynthesis. Skeletal pins and wires. Specification for general requirements |
| BS 3531-6.2:1991 |
Implants for osteosynthesis. Skeletal pins and wires. Specification for dimensions of Steinmann skeletal pins |
| BS 3531-6.3:1994 |
Implants for osteosynthesis. Skeletal pins and wires. Specification for Kirschner skeletal wires |
| BS 3532:1990 |
Method of specifying unsaturated polyester resin systems |
| BS 3533:1981 |
Glossary of thermal insulation terms |
| BS 3537:1979 |
Specification for gudgeon pins up to 200 mm diameter |
| BS 3539:1986 |
Specification for sound level meters for the measurement of noise emitted by motor vehicles |
| BS 3544:1962 |
Methods of test for polyvinyl acetate adhesives for wood |
| BS 3546:2001 |
Coated fabrics for use in the manufacture of water penetration resistant clothing |