| Standard |
Official Title of Standard |
|
| BS 3762-3.21:1986 |
Analysis of formulated detergents. Quantitative test methods. Method for determination of total silica content |
| BS 3762-3.22:1986 |
Analysis of formulated detergents. Quantitative test methods. Method for determination of inorganic sulphate content |
| BS 3762-3.23:1990 |
Analysis of formulated detergents. Quantitative test methods. Method for determination of chelating agents content |
| BS 3762-3.24:1988 |
Analysis of formulated detergents. Quantitative test methods. Method for determination of low molecular mass alcohols content |
| BS 3762-3.25:1989 |
Analysis of formulated detergents. Quantitative test methods. Methods for determination of water and volatile matter content |
| BS 3762-3.5:1986 |
Analysis of formulated detergents. Quantitative test methods. Methods for determination of total organic matter content |
| BS 3762-3.6:1986 |
Analysis of formulated detergents. Quantitative test methods. Method for determination of matter soluble in light petroleum |
| BS 3762-3.7:1986 |
Analysis of formulated detergents. Quantitative test methods. Method for determination of total non-ionic matter content |
| BS 3762-3.8:1986 |
Analysis of formulated detergents. Quantitative test methods. Method for determination of alkanolamides content |
| BS 3762-3.9:1986 |
Analysis of formulated detergents. Quantitative test methods. Method for determination of soap content |
| BS 3762-4.1:1989 |
Analysis of formulated detergents. Physical test methods. Method for determination of clear point of liquid detergents |
| BS 3762-4.2:1986 |
Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density |
| BS 3766:1979 |
Specification for coolant pumps for machine tools |
| BS 3769:1964 |
Specification for copper naphthenate and copper naphthenate concentrates |
| BS 3770:1964 |
Specification for zinc naphthenate and zinc naphthenate concentrates |
| BS 3775:1964 |
Specification for counting trays (planchets) for radioactive assay |
| BS 3777:1964 |
Specification for screw thread measuring cylinders |
| BS 3783:1964 |
Specification for X-ray lead-rubber protective aprons for personal use |
| BS 3788:1984 |
Specification for tin coated finish on culinary utensils |
| BS 3789:1975 |
Specification for non-returnable fibreboard tomato trays |
| BS 3790:1995 |
Specification for endless wedge belt drives and endless V-belt drives |
| BS 3797:1990 |
Specification for lightweight aggregates for masonry units and structural concrete |
| BS 3799:1974 |
Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry |
| BS 3800-3:1990 |
General tests for machine tools. Method of testing performance of machines operating under loaded conditions in respect of thermal distortion |
| BS 3810-1:1964 |
Glossary of terms used in materials handling. Terms used in connection with pallets, stillages, hand and powered trucks |
| BS 3810-2:1965 |
Glossary of terms used in materials handling. Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling) |
| BS 3810-3:1967 |
Glossary of terms used in materials handling. Terms used in connection with pneumatic and hydraulic handling |
| BS 3810-4:1968 |
Glossary of terms used in materials handling. Terms used in connection with cranes |
| BS 3810-5:1971 |
Glossary of terms used in materials handling. Terms used in connection with lifting tackle |
| BS 3810-6:1973 |
Glossary of terms used in materials handling. Terms used in connection with pulley blocks |
| BS 3810-7:1973 |
Glossary of terms used in materials handling. Terms used in connection with aerial ropeways and cableways |
| BS 3810-8:1975 |
Glossary of terms used in materials handling. Terms used in connection with lifts, lifting platforms and inclined haulages |
| BS 3810-9:1975 |
Glossary of terms used in materials handling. Terms used in connection with rail transport |
| BS 3811:1993 |
Glossary of terms used in terotechnology |
| BS 3813-1:1964 |
Specification for incinerators for waste from trade and residential premises. Capacities between 50 lb/h and 1000 lb/h |
| BS 3816:1989 |
Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies |
| BS 3818:1964 |
Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars |
| BS 381C:1996 |
Specification for colours for identification, coding and special purposes |
| BS 3821-1:1974 |
Specification for hardmetal dies and associated hardmetal tools. Designation and marking of as-sintered pellets and finished dies |
| BS 3821-2:1974 |
Specification for hardmetal dies and associated hardmetal tools. As-sintered pellets and finished dies for drawing round wire |
| BS 3821-3:1974 |
Specification for hardmetal dies and associated hardmetal tools. As-sintered pellets and finished dies for drawing round bar |
| BS 3821-4:1982 |
Specification for hardmetal dies and associated hardmetal tools. Dimensions and tolerances of as-sintered hardmetal pellets used in heading dies |
| BS 3823:1990 |
Grading of ash and hickory wood handles for hand tools |
| BS 3828:1973 |
Specification for crystal glass |
| BS 3830:1973 |
Specification for vitreous enamelled steel building components |
| BS 3831:1964 |
Specification for vitreous enamel finishes for domestic and catering appliances |
| BS 3837-1:2004 |
Expanded polystyrene boards. Boards and blocks manufactured from expandable beads. Requirements and test methods |
| BS 3838:1980 |
Specification for blazer fabrics |
| BS 3839:1978 |
Specification for oxygen-free high-conductivity copper for electronic tubes and semiconductor devices |
| BS 3841-1:1994 |
Determination of smoke emission from manufactured solid fuels for domestic use. General method for determination of smoke emission rate |
| BS 3841-2:1994 |
Determination of smoke emission from manufactured solid fuels for domestic use. Methods for measuring the smoke emission rate |
| BS 3843-1:1992 |
Guide to terotechnology (the economic management of assets). Introduction to terotechnology |
| BS 3843-2:1992 |
Guide to terotechnology (the economic management of assets). Introduction to the techniques and applications |
| BS 3843-3:1992 |
Guide to terotechnology (the economic management of assets). Guide to the available techniques |
| BS 3858:1992 |
Specification for binding and identification sleeves for use on electric cables and wires |
| BS 3863:1992 |
Guide for gas turbines procurement |
| BS 3866:1979 |
Specification for holes and shanks for buttons |
| BS 3867:1987 |
Method of specifying outside diameters and pressure ratings for pipe of thermoplastics materials (inch series) |
| BS 3868:1995 |
Specification for prefabricated drainage stack units in galvanized steel |
| BS 387:1979 |
Specification for interchangeability dimensions of the drive of solid and segmental circular saws for cold cutting of metals: saw diameter range 224 mm to 2240 mm |
| BS 3870-1:1991 |
Stitches and seams. Classification and terminology of stitch types |
| BS 3870-2:1991 |
Stitches and seams. Classification and terminology of seam types |
| BS 3876-1:1990 |
Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for parallel barrel rollers, mountings and assemblies |
| BS 3876-2:1990 |
Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for vertical spindle pulleys, mountings and assemblies |
| BS 3876-5:1990 |
Rope rollers, pulleys, mountings and assemblies for colliery track haulage. Specification for suspended pulley assemblies and clamps |
| BS 3877:1991 |
Specification for metal cutting bandsaw blades |
| BS 3878:1982 |
Specification for flexible PVC sheeting for hospital use |
| BS 388:1972 |
Specification for aluminium pigments |
| BS 3880-1:1971 |
Specification for paper tape for data processing. Unpunched paper tape |
| BS 3880-2:1971 |
Specification for paper tape for data processing. Dimensions and location of punched holes in paper tape |
| BS 3880-3:1971 |
Specification for paper tape for data processing. Representation of codes on paper tape |
| BS 3880-4:1972 |
Specification for paper tape for data processing. General requirements for data interchange on punched paper tape |
| BS 3882:1994 |
Specification for topsoil |
| BS 3884-1:1974 |
Modular units for machine tools. Specification for basic units |
| BS 3884-2:1990 |
Modular units for machine tools. Specification for workholding pallets up to 800 mm nominal size |
| BS 3884-3:1990 |
Modular units for machine tools. Specification for workholding pallets over 800 mm nominal size |
| BS 3886:1965 |
Specification for dental impression compound |
| BS 3887:1991 |
Specification for pressure sensitive adhesive closing and sealing tapes |
| BS 3890:1965 |
General recommendations for the testing, calibration and processing of radiation monitoring films |
| BS 3892-1:1997 |
Pulverized-fuel ash. Specification for pulverized-fuel ash for use with Portland cement |