| Standard |
Official Title of Standard |
|
| BS 4427-15:1982 |
Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. |
| BS 4427-2:1969 |
Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. Measurement of pH value of sodium tripolyphosphate |
| BS 4427-3:1989 |
Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. |
| BS 4427-4:1969 |
Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. Determination of loss on ignition |
| BS 4427-5:1974 |
Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. Determination of particle size distribution |
| BS 4427-6:1974 |
Methods of test for sodium tripolyphosphate ($7Ipenta$7Rsodium triphosphate) and sodium pyrophosphate ($7Itetra$7Rsodium pyrophosphate) for industrial use. Estimation of pyrophosphate content of sodium pyrophosphate |
| BS 4428:1989 |
Code of practice for general landscape operations (excluding hard surfaces) |
| BS 4429:1987 |
Specification for rigging screws and turnbuckles for general engineering, lifting purposes and pipe hanger applications |
| BS 4430-2:1969 |
Recommendations for the safety of powered industrial trucks. Operation and maintenance |
| BS 4431:1989 |
Methods of sampling and test for liquefied anhydrous ammonia |
| BS 4432-1:1995 |
Methods for determining optical properties of pulp, paper and board. Measurement of diffuse reflectance factor of paper, board and pulps |
| BS 4433-1:1994 |
Domestic solid mineral fuel fired boilers with rated output up to 45 kW. Domestic solid mineral fuel fired boilers with rated output up to 45 kw. Specification for boilers with undergrate ash removal |
| BS 4433-2:1994 |
Domestic solid mineral fuel fired boilers with rated output up to 45 kW. Specification for gravity feed boilers designed to burn small anthracite |
| BS 4436:1978 |
Specification for reach and straddle fork lift trucks - stability tests |
| BS 4438:1969 |
Specification for filing cabinets and suspended filing pockets |
| BS 4439:1969 |
Specification for screwed studs for general purposes. Metric series |
| BS 4442-1:1969 |
Specification for lathe spindle noses and faceplates. Types 'A' and 'Camlock' |
| BS 4443-1:1988 |
Methods of test for flexible cellular materials. Method 4. Measurement of cell count |
| BS 4443-3:1988 |
Methods of test for flexible cellular materials. Method 8. Determination of creep. Method 9. Determination of dynamic cushioning performance |
| BS 4443-4:1989 |
Methods of test for flexible cellular materials. Method 10. Determination of solvent swelling |
| BS 4443-7:1992 |
Methods of test for flexible cellular materials. Method 17. Determination of tear strength of flexible cellular material with an integral skin. Method 18. Determination of compression set under humid conditions |
| BS 4444:1989 |
Guide to electrical earth monitoring and protective conductor proving |
| BS 4445:1969 |
Schedule of tests for gasification and reforming plants using hydrocarbon feedstocks |
| BS 4448:1988 |
Specification for school exercise books and papers |
| BS 4449:1997 |
Specification for carbon steel bars for the reinforcement of concrete |
| BS 4462:1969 |
Guide for the preparation of technical sales literature for measuring instruments and process control equipment |
| BS 4463:1969 |
Specification for crinkle washers for general engineering purposes. Metric series |
| BS 4464:1969 |
Specification for spring washers for general engineering and automobile purposes. Metric series |
| BS 4465:1989 |
Specification for design and construction of electric hoists for both passengers and materials |
| BS 4467:1991 |
Guide to dimensions in designing for elderly people |
| BS 4475:2000 |
Specification for straight mineral lubricating oils |
| BS 4478:1969 |
Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour television transposers |
| BS 4479-1:1990 |
Design of articles that are to be coated. General recommendations |
| BS 4479-2:1990 |
Design of articles that are to be coated. Recommendations for electroplated and autocatalytic coatings |
| BS 4479-3:1990 |
Design of articles that are to be coated. Recommendations for conversion coatings |
| BS 4479-4:1990 |
Design of articles that are to be coated. Recommendations for paint coatings and varnish coatings |
| BS 4479-5:1990 |
Design of articles that are to be coated. Recommendations for anodic oxidation coatings |
| BS 4479-7:1990 |
Design of articles that are to be coated. Recommendations for thermally sprayed coatings |
| BS 4479-8:1990 |
Design of articles that are to be coated. Recommendations for vitreous enamel coatings |
| BS 4479-9:1990 |
Design of articles that are to be coated. Recommendations for low pressure and vacuum deposited coatings |
| BS 4480-1:1992 |
Plain bearings: metric series. Sintered bushes. Dimensions and tolerances |
| BS 4480-2:1974 |
Specification for plain bearings: metric series. Solid plastics bushes |
| BS 4480-3:1993 |
Plain bearings: metric series. Copper alloy bushes |
| BS 4480-4:1979 |
Specification for plain bearings: metric series. Dimensions, tolerances and methods of checking wrapped bushes |
| BS 4480-5:1979 |
Plain bearings: metric series. Dimensions, tolerances and methods of checking thin-walled half bearings |
| BS 4480-6:1984 |
Plain bearings: metric series. Specification for dimensions and tolerances of ring type thrust washers made from strip |
| BS 4480-7:1984 |
Plain bearings: metric series. Specification for dimensions and tolerances of pressed bimetallic half thrust washers |
| BS 4480-8:1984 |
Plain bearings: metric series. Specification for dimensions, tolerances and methods of checking of thin-walled flanged half bearings |
| BS 4480-9:1995 |
Plain bearings: metric series. Checking the outside diameter of wrapped bushes |
| BS 448-1:1981 |
Dimensions of electronic tubes and valves. IEC dimensions |
| BS 4481-2:1983 |
Bonded abrasive products. Specification for dimensions of grinding wheels and segments |
| BS 448-2:1981 |
Dimensions of electronic tubes and valves. Specification for dimensions of United Kingdom electronic tubes |
| BS 4482:1985 |
Specification for cold reduced steel wire for the reinforcement of concrete |
| BS 4483:1998 |
Steel fabric for the reinforcement of concrete |
| BS 4484-1:1969 |
Specification for measuring instruments for constructional works. Metric graduation and figuring of instruments for linear measurement |
| BS 4485-1:1969 |
Water cooling towers. Glossary of terms |
| BS 4485-2:1988 |
Water cooling towers. Methods for performance testing |
| BS 4485-3:1988 |
Water cooling towers. Code of practice for thermal and functional design |
| BS 4485-4:1996 |
Water cooling towers. Code of practice for structural design and construction |
| BS 4486:1980 |
Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete |
| BS 449-2:1969 |
Specification for the use of structural steel in building. Metric units |
| BS 4493:1969 |
Specification for copper salts for electroplating |
| BS 4495:1969 |
Recommendations for the flame spraying of ceramic and cermet coatings |
| BS 4496:1984 |
Method for determination of acid-insoluble ash of pulp |
| BS 4497:1969 |
Recommendations for the detection and estimation of nitrogenous treating agents in paper |
| BS 4498:1982 |
Method for determination of the Kappa number of pulp (degree of delignification) |
| BS 4499:1984 |
Method for determination of alkali solubility of pulp |
| BS 450:1958 |
Specification for machine screws and machine screw nuts (B.S.W. & B.S.F. threads) |
| BS 4500-4:1985 |
ISO limits and fits. Specification for system of cone (taper) fits for cones from $iC=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
| BS 4500-5:1988 |
ISO limits and fits. Specification for system of cone tolerances for conical workpieces from $7IC$7R = 1:3 to 1:500 and lengths from 6 mm to 630 mm |
| BS 4500A:1970 |
ISO limits and fits. Data sheet: selected ISO fits - hole basis |
| BS 4500B:1970 |
ISO limits and fits. Data sheet: selected ISO fits - shaft basis |
| BS 4505-1:1981 |
Digital data transmission. Specification for basic mode control procedures |
| BS 4505-2:1990 |
Digital data transmission. Character structure for start/stop and synchronous transmission |
| BS 4505-3:1981 |
Digital data transmission. Method for use of longitudinal parity to detect errors in information messages |
| BS 4505-6:1976 |
Digital data transmission. Complements to the basic mode control procedures; recovery, abort and interrupt, multiple station selection |
| BS 4505-7:1976 |
Digital data transmission. Basic mode control procedures; conversational information message transer |
| BS 4506:1970 |
Specification for shaft ends |
| BS 4507:1969 |
Specification for grease gun cartridges (composite type) |
| BS 4508-1:1986 |
Thermally insulated underground pipelines. Specification for steel cased systems with air gap |