Glossary of EN, IEC, ISO and BS Standards

BS 4592-1:1995 Onwards

Standard Official Title of Standard
BS 4592-1:1995 Industrial type flooring, walkways and stair treads. Specification for open bar gratings
BS 4592-2:1987 Industrial type flooring, walkways and stair treads. Specification for expanded metal grating panels
BS 4592-3:1987 Industrial type flooring, walkways and stair treads. Specification for cold formed planks
BS 4592-4:1992 Industrial type flooring, walkways and stair treads. Specification for glass reinforced plastics open bar gratings
BS 4592-5:1995 Industrial type flooring, walkways and stair treads. Specification for solid plates in steel, aluminium and glass reinforced plastics
BS 460:2002 Cast Iron rainwater goods. Specification
BS 4601:1970 Specification for electroplated coatings of nickel plus chromium on plastics materials
BS 4602:1977 Specification for the use of metric units in specifications for glass containers and finishes
BS 4603:1970 Method for determination of residue on ignition or ash of chemical products
BS 4604-1:1970 Specification for the use of high strength friction grip bolts in structural steelwork. Metric series. General grade
BS 4604-2:1970 Specification for the use of high strength friction grip bolts in structural steelwork. Metric series. Higher grade (parallel shank)
BS 4607-1:1984 Non-metallic conduits and fittings for electrical installations. Specification for fittings and components of insulating material
BS 4607-2:1970 Non-metallic conduits and fittings for electrical installations. Rigid PVC conduits and conduit fittings. Imperial units
BS 4607-3:1971 Non-metallic conduits and fittings for electrical installations. Pliable corrugated, plain and reinforced conduits of self-extinguishing plastics material
BS 4607-5:1982 Non-metallic conduits and fittings for electrical installations. Specification for rigid conduits, fittings and components of insulating material
BS 46-1:1958 Keys and keyways and taper pins. Specification. Keys and keyways
BS 4611:1989 Methods of test for polyolefin tape yarns
BS 4617:1983 Methods for determining the performance of pumps and motors for hydraulic fluid power transmission
BS 4618:Introduction:1970 Recommendations for the presentation of plastics design data. General introduction
BS 4618-1.1.1:1970 Recommendations for the presentation of plastics design data. Mechanical properties. Creep in uniaxial tension or compression (with particular reference to solid plastics)
BS 4618-1.1.2:1976 Recommendations for the presentation of plastics design data. Mechanical properties. Creep in flexure at low strains
BS 4618-1.1.3:1974 Recommendations for the presentation of plastics design data. Mechanical properties. Creep lateral contraction ratio (Poisson's ratio)
BS 4618-1.1:1970 Recommendations for the presentation of plastics design data. Mechanical properties. Creep
BS 4618-1.2:1972 Recommendations for the presentation of plastics design data. Mechanical properties. Impact behaviour
BS 4618-1.3.1:1975 Recommendations for the presentation of plastics design data. Mechanical properties. Static fatigue failure
BS 4618-1.3.3:1976 Recommendations for the presentation of plastics design data. Mechanical properties. Environmental stress cracking
BS 4618-1.3:1975 Recommendations for the presentation of plastics design data. Mechanical properties. Strength
BS 4618-2.1:1970 Recommendations for the presentation of plastics design data. Electrical properties. Permittivity
BS 4618-2.2:1970 Recommendations for the presentation of plastics design data. Electrical properties. Loss tangent
BS 4618-2.3:1975 Recommendations for the presentation of plastics design data. Electrical properties. Volume resistivity
BS 4618-2.4:1975 Recommendations for the presentation of plastics design data. Electrical properties. Surface resistivity
BS 4618-3.1:1970 Recommendations for the presentation of plastics design data. Thermal properties. Linear thermal expansion
BS 4618-3.2:1973 Recommendations for the presentation of plastics design data. Thermal properties. Heat content
BS 4618-3.3:1973 Recommendations for the presentation of plastics design data. Thermal properties. Thermal conductivity
BS 4618-4.1:1972 Recommendations for the presentation of plastics design data. Environmental and chemical effects. Chemical resistance to liquids
BS 4618-4.2:1972 Recommendations for the presentation of plastics design data. Environmental and chemical effects. Resistance to natural weathering
BS 4618-4.3:1974 Recommendations for the presentation of plastics design data. Environmental and chemical effects. Resistance to colour change produced by exposure to light
BS 4618-4.4:1973 Recommendations for the presentation of plastics design data. Environmental and chemical effects. The effect of marine exposure
BS 4618-4.5:1974 Recommendations for the presentation of plastics design data. Environmental and chemical effects. The effect on plastics of soil burial and biological attack
BS 4618-4.6:1974 Recommendations for the presentation of plastics design data. Environmental and chemical effects. The thermal endurance of plastics
BS 4618-5.1:1970 Recommendations for the presentation of plastics design data. Other properties. Density
BS 4618-5.2:1970 Recommendations for the presentation of plastics design data. Other properties. Change in linear dimensions with moisture absorption
BS 4618-5.3:1972 Recommendations for the presentation of plastics design data. Other properties. Optical properties
BS 4618-5.4:1972 Recommendations for the presentation of plastics design data. Other properties. Acoustical properties (mechanical damping capacity)
BS 4618-5.5:1974 Recommendations for the presentation of plastics design data. Other properties. Data on diffusion
BS 4618-5.6:1975 Recommendations for the presentation of plastics design data. Other properties. Guide to sliding friction
BS 4620:1970 Specification for rivets for general engineering purposes
BS 4622:1970 Specification for grey iron pipes and fittings
BS 4623:1989 Specification for folded continuous stationery for impact printers
BS 4624:1981 Methods of test for asbestos-cement building products
BS 46-3:1951 Keys and keyways and taper pins. Specification for solid and split taper pins for general engineering purposes
BS 4630:1970 Specification for tributyltin oxide (di(tributyltin) oxide)
BS 463-1:1958 Specification for sockets for wire ropes. Inch units
BS 463-2:1970 Specification for sockets for wire ropes. Metric units
BS 4633 and 4634:1970 Method for the determination of crystallizing point. Method for the determination of melting point and/or melting range
BS 4636-1:1970 Punched cards. Unpunched paper cards
BS 4636-2:1970 Punched cards. Dimensions and location of rectangular holes in 12-row, 80-column punched cards
BS 4636-3:1986 Punched cards. Specification for representation of 7-bit and 8-bit coded character sets on 12-row punched cards
BS 4637:1970 Specification for carbon steel wire for coiled springs (bedding and seating)
BS 4638:1970 Specification for carbon steel wire for zigzag and square-form springs
BS 4639:1987 Specification for brakes and braking systems for towed agricultural vehicles
BS 4641:1986 Method for specifying electroplated coatings of chromium for engineering purposes
BS 4642:1970 Glossary of industrial furnace terms
BS 4651-0:1987 Ammonia solution. Methods for sampling
BS 4651-1:1988 Ammonia solution. Method for determination of density at 20$0DC
BS 4651-2:1987 Ammonia solution. Method for determination of ammonia content
BS 4651-3:1987 Ammonia solution. Method for determination of residue on evaporation
BS 4651-4:1988 Ammonia solution. Method for determination of residue after heating at 850$0DC
BS 4651-5:1988 Ammonia solution. Method for determination of iron content
BS 4651-6:1988 Ammonia solution. Methods for determination of chloride content
BS 4651-7:1988 Ammonia solution. Method for determination of carbon dioxide content
BS 4652:1995 Specification for zinc-rich priming paint (organic media)
BS 4653-2:1970 Specification for paper covered copper conductors. Rectangular conductors
BS 4655:1986 Method for determination of pile loss of cut-pile and non-loop pile upholstery fabrics
BS 4656-1:1981 Accuracy of machine tools and methods of test. Specification for lathes, general purpose type
BS 4656-10:1975 Specification for the accuracy of machine tools and methods of test. Drilling machines, radial type
BS 4656-11:1974 Accuracy of machine tools and methods of test. Drilling machines, vertical floor mounted column and pillar types
BS 4656-12:1979 Specification for the accuracy of machine tools and methods of test. Dividing heads
BS 4656-13:1983 Accuracy of machine tools and methods of test. Specification for broaching machines, vertical surface type
BS 4656-14:1983 Accuracy of machine tools and methods of test. Specification for broaching machines, vertical internal type



© Copyright. . Standards Direct. All Rights Reserved. Terms | Site Map