| Standard |
Official Title of Standard |
|
| BS 1006:B01C:LFS4:1990 |
Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 4 |
| BS 1006:B01C:LFS5:1988 |
Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 5 |
| BS 1006:B01C:LFS6:1988 |
Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 6 |
| BS 1006:B01C:LFS7:1985 |
Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 7 |
| BS 1006:B01C:LFS8:1987 |
Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 8 |
| BS 1010-2:1973 |
Specification for draw-off taps and stopvalves for water services (screw-down pattern). Draw-off taps and above-ground stopvalves |
| BS 1016-1:1973 |
Methods for analysis and testing of coal and coke. Total moisture of coal |
| BS 1016-10:1977 |
Methods for analysis and testing of coal and coke. Arsenic in coal and coke |
| BS 1016-100:1994 |
Methods for analysis and testing of coal and coke. General introduction and methods for reporting results |
| BS 1016-102:2000 |
Methods for analysis and testing of coal and coke. Determination of total moisture of coke |
| BS 1016-104.1:1999 |
Methods for analysis and testing of coal and coke. Proximate analysis. Determination of moisture content of the general analysis test sample. Determination of ash |
| BS 1016-104.3:1998 |
Methods for analysis and testing of coal and coke. Determination of volatile matter content |
| BS 1016-104.4:1998 |
Methods for analysis and testing of coal and coke. Determination of ash content |
| BS 1016-105:1992 |
Methods for analysis and testing of coal and coke. Determination of gross calorific value |
| BS 1016-106.1.1:1996 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of carbon and hydrogen content. High temperature combustion method |
| BS 1016-106.1.2:1996 |
Methods for analysis and testing of coal and coke. Liebig method |
| BS 1016-106.2:1997 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of nitrogen content |
| BS 1016-106.4.1:1993 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. Eschka method |
| BS 1016-106.4.2:1996 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. High temperature combustion method |
| BS 1016-106.5:1996 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of forms of sulfur in coal |
| BS 1016-106.6.1:1997 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of chlorine content. Eschka method |
| BS 1016-106.7:1997 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of carbonate carbon content |
| BS 1016-107.1:1991 |
Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of crucible swelling number |
| BS 1016-107.2:1991 |
Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Assessment of caking power by Gray-King coke test |
| BS 1016-107.3:1990 |
Methods for analysis and testing of coal and coke. Caking and swelling properties of coal. Determination of swelling properties using a dilatometer |
| BS 1016-108.1:1996 |
Methods for analysis and testing of coal and coke. Tests special to coke. Determination of shatter indices |
| BS 1016-108.2:1992 |
Methods for analysis and testing of coal and coke. Tests special to coke. Determination of Micum and Irsid indices |
| BS 1016-108.3:1995 |
Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (small container) |
| BS 1016-108.4:1995 |
Methods for analysis and testing of coal and coke. Tests special to coke. Determination of bulk density (large container) |
| BS 1016-108.5:1992 |
Methods for analysis and testing of coal and coke. Tests special to coke. Determination of density and porosity |
| BS 1016-108.6:1992 |
Methods for analysis and testing of coal and coke. Tests special to coke. Determination of critical air blast value |
| BS 1016-109:1995 |
Methods for analysis and testing of coal and coke. Size analysis of coal |
| BS 1016-110.1:1996 |
Methods for analysis and testing of coal and coke. Size analysis of coke. Nominal top size greater than 20 mm |
| BS 1016-110.2:1996 |
Methods for analysis and testing of coal and coke. Size analysis of coke. Nominal top size 20 mm or less |
| BS 1016-111:1998 |
Methods for analysis and testing of coal and coke. Determination of abrasion index of coal |
| BS 1016-112:1995 |
Methods for analysis and testing of coal and coke. Determination of Hardgrove grindability index of hard coal |
| BS 1016-113:1995 |
Methods for analysis and testing of coal and coke. Determination of ash fusibility |
| BS 1016-14:1963 |
Methods for analysis and testing of coal and coke. Analysis of coal ash and coke ash |
| BS 1016-21:1981 |
Methods for analysis and testing of coal and coke. Determination of moisture-holding capacity of hard coal |
| BS 1016-6:1977 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coal |
| BS 1016-7:1977 |
Methods for analysis and testing of coal and coke. Ultimate analysis of coke |
| BS 1016-8:1977 |
Methods for analysis and testing of coal and coke. Chlorine in coal and coke |
| BS 1016-9:1977 |
Methods for analysis and testing of coal and coke. Phosphorus in coal and coke |
| BS 1017-1:1989 |
Sampling of coal and coke. Methods for sampling of coal |
| BS 1017-2:1994 |
Sampling of coal and coke. Methods for sampling of coke |
| BS 10175:2001 |
Investigation of potentially contaminated sites. Code of practice |
| BS 1041-2.1:1985 |
Code for temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers |
| BS 1041-2.2:1989 |
Code for temperature measurement. Expansion thermometers. Guide to selection and use of dial-type expansion thermometers |
| BS 1041-3:1989 |
Temperature measurement. Guide to selection and use of industrial resistance thermometers |
| BS 1041-4:1992 |
Temperature measurement. Guide to the selection and use of thermocouples |
| BS 1041-5:1989 |
Temperature measurement. Guide to selection and use of radiation pyrometers |
| BS 1041-7:1988 |
Temperature measurement. Guide to selection and use of temperature/time indicators |
| BS 1042-1.4:1992 |
Measurement of fluid flow in closed conduits. Pressure differential devices. Guide to the use of devices specified in Sections 1.1 and 1.2 |
| BS 1042-2.1:1983 |
Measurement of fluid flow in closed conduits. Velocity area methods. Method using Pitot static tubes |
| BS 1042-2.2:1983 |
Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section |
| BS 1042-2.3:1984 |
Measurement of fluid flow in closed conduits. Velocity area methods. |
| BS 1042-2.4:1989 |
Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions |
| BS 1044-1:1964 |
Specificaton for gauge blanks. Plug, ring and calliper gauges |
| BS 1050:1984 |
Specification for indicator lamps for use in telecommunication apparatus and for allied purposes |
| BS 1052:1980 |
Specification for mild steel wire for general engineering purposes |
| BS 1054:1975 |
Specification for engineers' comparators for external measurement |
| BS 1070:1993 |
Specification for black paint (tar-based) |
| BS 1075:1989 |
Specification for tungsten halogen lamps (non vehicle) |
| BS 1083:1965 |
Specification for precision hexagon bolts, screws and nuts (B.S.W. & B.S.F. threads) |
| BS 1088-1:2003 |
Marine plywood. Requirements |
| BS 1088-2:2003 |
Marine plywood. Determination of bonding quality using the knife test |
| BS 1089:1973 |
Specification for workhead spindle noses for grinding machines: cylindrical external, internal and universal types |
| BS 1090:1970 |
Specification for flameproof hand-held electric drilling machines primarily for use in mines |
| BS 1091:1963 |
Specification for pressed steel gutters, rainwater pipes, fittings and accessories |
| BS 1098-1:1967 |
Specification for jig bushes. Inch units |
| BS 1098-2:1977 |
Specification for jig bushes. Metric units |
| BS 11:1985 |
Specification for railway rails |
| BS 1101:1977 |
Specification for pressure containers for paint and other similar substances |
| BS 1103:1989 |
Specification for fabrics for the reinforcement of rubber hoses |
| BS 1104:1957 |
Specification for general purpose Acme screw threads |
| BS 1109:1943 |
Specification for cold forged mild steel rivets for cold closing |
| BS 1113:1999 |
Specification for design and manufacture of water-tube steam generating plant (including superheaters, reheaters and steel tube economizers) |
| BS 1117-2:1964 |
Specification for bare fine resistance wire for precision electrical equipment. Metric units |
| BS 1123-1:1987 |
Safety valves, gauges and fusible plugs for compressed air or inert gas installations. Code of practice for installation |
| BS 1125:1987 |
Specification for WC flushing cisterns (including dual flush cisterns and flush pipes) |