| Standard |
Official Title of Standard |
|
| BS 4991:1974 |
Specification for propylene copolymer pressure pipe |
| BS 499-1:1991 |
Welding terms and symbols. Glossary for welding, brazing and thermal cutting |
| BS 499-2C:1999 |
Welding terms and symbols. European arc welding symbols in chart form |
| BS 4993-1:1974 |
Methods of test for aluminium fluoride for industrial use. Determination of fluorine content |
| BS 4993-10:1983 |
Methods of test for aluminium fluoride for industrial use. Determination of phosphorus content |
| BS 4993-2:1974 |
Methods of test for aluminium fluoride for industrial use. Determination of iron content |
| BS 4993-3:1974 |
Methods of test for aluminium fluoride for industrial use. Determination of silica content |
| BS 4993-4:1980 |
Methods of test for aluminium fluoride for industrial use. Preparation and storage of test samples |
| BS 4993-5:1980 |
Methods of test for aluminium fluoride for industrial use. Determination of moisture content (Karl Fischer method) |
| BS 4993-6:1980 |
Methods of test for aluminium fluoride for industrial use. Determination of moisture content (gravimetric method) |
| BS 4993-7:1980 |
Methods of test for aluminium fluoride for industrial use. Determination of sodium content |
| BS 4993-8:1980 |
Methods of test for aluminium fluoride for industrial use. Determination of sulphate content |
| BS 4993-9:1980 |
Methods of test for aluminium fluoride for industrial use. Determination of sulphur content (X-ray fluorescence spectrometric method) |
| BS 4994:1987 |
Specification for design and construction of vessels and tanks in reinforced plastics |
| BS 4995:1973 |
Recommendations for measurement of the veiling glare index of lenses and optical systems |
| BS 4996:1973 |
Specification for line traps for power line carrier systems |
| BS 4997:1991 |
Specification for wooden axilla crutches |
| BS 4998:1985 |
Specification for moulded thermoplastics dustbins (excluding lids) |
| BS 4999-0:1987 |
General requirements for rotating electrical machines. General introduction and information on other Parts |
| BS 4999-103:2004 |
General requirements for rotating electrical machines. Specification for symbols |
| BS 4999-140:1987 |
General requirements for rotating electrical machines. Specification for voltage regulation and parallel operation of a.c. synchronous generators |
| BS 4999-141:2004 |
General requirements for rotating electrical machines. Specification for standard dimensions |
| BS 4999-142:1987 |
General requirements for rotating electrical machines. Specification for mechanical performance: vibration |
| BS 4999-143:1987 |
General requirements for rotating electrical machines. Specification for tests |
| BS 4999-145:1987 |
General requirements for rotating electrical machines. Specification for winding terminations |
| BS 4999-147:1988 |
General requirements for rotating electrical machines. Specification for dimensions of brushes and brush-holders for electrical machinery |
| BS 4A 100:2003 |
Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS 4A 102:2002 |
Specification for steel bolts (Unified hexagons and Unified threads) for aircraft |
| BS 4A 104:2002 |
Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads) for aircraft |
| BS 4A 111:1993 |
Specification for cadmium-plated steel bolts (Unified hexagons and Unified threads) with close tolerance shanks |
| BS 4A 112:1992 |
Specification for cadmium-plated steel shear bolts (Unified hexagons and Unified threads) |
| BS 4A 113:1999 |
Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive, bolts |
| BS 4A 114:1999 |
Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts (strength class 880/1080) |
| BS 4A 169:2002 |
Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft |
| BS 4A 170:1999 |
Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread) |
| BS 4A 228:1997 |
Specification for steel double hexagon bolts. 1250 MPa (180,000 lbf/in$u2) for aircraft |
| BS 4A 4:1966 |
Test pieces and test methods for metallic materials for aircraft. Metric units |
| BS 4A 4-1.2:1967 |
Specification for test pieces and test methods for metallic materials. Tensile tests. Tensile tests - elevated temperature. Metric units |
| BS 4A 4-1.3:1967 |
Specification for test pieces and test methods for metallic materials. Tensile tests. Uninterrupted creep and rupture tests. Metric units |
| BS 4C 14:1991 |
Specification for aircraft pressure refuelling connectors |
| BS 4F 111:2002 |
Flax harness webbing for aerospace purposes |
| BS 4F 119:2002 |
145 g/m$u2 to 235 g/m$u2 nylon parachute fabric |
| BS 4F 123:1996 |
Woven nylon narrow fabrics for aerospace purposes (nominally 235 dtex yarns) |
| BS 4F 124:1996 |
Specification for woven nylon 6.6 narrow fabrics for aerospace purposes (nominally 940 dtex yarns) |
| BS 4F 33:1961 |
Specification for flexible cotton rope for aeronautical purposes |
| BS 4F 57:1990 |
Specification for scoured cotton fabric for inflatable equipment for aerospace purposes |
| BS 4F 68:2002 |
Controlled storage of vulcanized rubbers for use in aerospace applications |
| BS 4G 173-1:1985 |
Connectors for ground electrical supplies for aircraft. Specification for design, performance and test requirements |
| BS 4G 173-2:1985 |
Connectors for ground electrical supplies for aircraft. Specification for dimensions |
| BS 4G 178-2:1986 |
Crimped joints for aircraft electrical cables and wires. Specification for control of crimping (including user control tests) |
| BS 4G 198-1:1997 |
Sleeves for aircraft electric cables and equipment wires. Specification for elastomeric sleeves for binding and identification |
| BS 4G 198-3:1999 |
Sleeves and moulded components for aircraft electric cables and equipment wires. Specification for heat-shrinkable sleeving for binding, insulation, and identification |
| BS 4G 229:1996 |
Schedule for environmental conditions and test procedures for airborne equipment |
| BS 4J 10:1991 |
Specification for pressure-sensitive adhesive water resistant PVC tape |
| BS 4J 11:1991 |
Specification for pressure-sensitive adhesive paper masking tape |
| BS 4K 6:1928 |
Specification for aircraft material. Cast iron piston ring pots (sand cast and chill cast) |
| BS 4L 100:1993 |
Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys |
| BS 4L 101:1990 |
Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings |
| BS 4L 54:1986 |
Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness) |
| BS 4L 56:1986 |
Specification for tube of aluminium-2$9D% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness) |
| BS 4L 59:1985 |
Specification for sheet and strip of aluminium-manganese alloy (temper designation H16 or H26) |
| BS 4L 60:1985 |
Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22) |
| BS 4L 61:1985 |
Specification for sheet and strip of aluminium-manganese alloy (temper designation-O) |
| BS 4M 45-1:1998 |
Aircraft tyres and rims. Specifications |
| BS 4N 100-1:1999 |
Aircraft oxygen systems and equipment. Design and installation |
| BS 4N 100-2:1999 |
Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen |
| BS 4N 100-3:1999 |
Aircraft oxygen systems and equipment. Testing of equipment and systems |
| BS 4N 100-4:1999 |
Aircraft oxygen systems and equipment. Guide to the physiological factors |
| BS 4N 100-5:1999 |
Aircraft oxygen systems and equipment. Guide to fire and explosion hazards associated with oxygen |
| BS 4N 100-6:1999 |
Aircraft oxygen systems and equipment. Guidance and recommendations on the selection of materials for use with oxygen |
| BS 4S 106:1976 |
Specification. 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding) |
| BS 4S 14:1964 |
Specification for aircraft material. Carbon case-hardening steel |
| BS 4S 28:1964 |
Specification for aircraft material. 4 per cent nickel-chromium-molybdenum steel (air hardening) (100 tonf/sq in: limiting ruling section 2$9H in) |
| BS 4T 100:1997 |
Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock |
| BS 4T 45:1972 |
Specification for carbon-manganese steel tube (700 N/mm$u2) (tube 12.5 mm outside diameter and greater) (weldable) |
| BS 500:2000 |
Steel sleepers |
| BS 5000:Index:1981 |
Specification for rotating electrical machines of particular types or for particular applications. General introduction and index |
| BS 5000-15:1980 |
Rotating electrical machines of particular types or for particular applications. Machines with type of protection 'e' (increased safety) |
| BS 5000-16:1997 |
Rotating electrical machines of particular types or for particular applications. Rotating electrical machines with type of protection 'N' |
| BS 5000-17:1981 |
Rotating electrical machines of particular types or for particular applications. Machines with flameproof enclosure |