| Standard |
Official Title of Standard |
|
| BS 5982:1987 |
Method for determination of ground speed of earth-moving machinery |
| BS 5984:1980 |
Method for detection and determination of specified anti-oxidant additives in insulating oils |
| BS 5986:1980 |
Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW |
| BS 5987:1980 |
Methods for sampling tea |
| BS 5990:1990 |
Specification for direct gas-fired forced convection air heaters with rated heat inputs up to 2 MW for industrial and commercial space heating |
| BS 5991:1989 |
Specification for indirect gas fired forced convection air heaters with rated heat inputs up to 2 MW for industrial and commercial space heating |
| BS 5992-1:1980 |
Electrical relays. Specification for contact performance of electrical relays |
| BS 5992-4:1983 |
Electrical relays. Specification for contact loads of preferred values used in endurance tests for electrical relay contacts |
| BS 5992-5:1983 |
Electrical relays. Specification for test equipment used in endurance tests for electrical relay contacts |
| BS 5992-6:1984 |
Electrical relays. Specification for the basic modules for the dimensions of general purpose all-or-nothing relays |
| BS 5993:1994 |
Specification for cricket balls |
| BS 5998:1983 |
Specification for quality levels for steel valve castings |
| BS 5999:1980 |
Specification for serials holdings statements for libraries and documentation centres |
| BS 5F 118:2002 |
50 g/m$u2 nylon parachute fabric |
| BS 5F 120:2002 |
Continuous filament nylon sewing threads for aerospace purposes |
| BS 5F 49:1991 |
Specification for shuttle woven cotton webbing for aerospace purposes |
| BS 5F 54:2002 |
Heavy duty linen (flax) sewing thread for aerospace purposes |
| BS 5F 58:2002 |
Cotton thread for aerospace purposes |
| BS 5F 59:2002 |
Braided linen (flax) cord for aerospace purposes |
| BS 5G 178-1:1993 |
Crimped joints for aircraft electrical cables and wires. Specification for design requirements (including tests) for components and tools |
| BS 5L 34:1985 |
Specification for forging stock, bars, extruded sections and forgings of 99% aluminium |
| BS 5L 36:1985 |
Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter) |
| BS 5L 44:1985 |
Specification for forging stock, bars, extruded sections and forgings of aluminium-2$9D% magnesium alloy |
| BS 5M 23:1987 |
Specification for an identification scheme for pipelines |
| BS 5N 100-7:2002 |
Aircraft oxygen systems and equipment. Guide to cleaning labelling and packaging |
| BS 5S 100:1993 |
Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube) |
| BS 5S 15:1964 |
Specification for aircraft material. 3 per cent nickel case-hardening steel |
| BS 5S 21:1964 |
Specification for aircraft material. '20' carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension) |
| BS 5S 82:1976 |
Specification. 4% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1320-1520 MPa) |
| BS 5S 99:1994 |
Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa: limiting ruling section 150 mm) |
| BS 5T 2:1972 |
Specification for 4/1 nickel-chromium steel tube (1300 N/mm$u2) |
| BS 5V 7:1952 |
Specification for mahogany for use in airscrews |
| BS 5X 17:1998 |
Specification for oleoresinous varnish for aerospace purposes |
| BS 600:2000 |
A guide to the application of statistical methods to quality and standardization |
| BS 6000-1:2005 |
Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. General guide to acceptance sampling |
| BS 6000-2:2005 |
Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Guide to sampling by attributes |
| BS 6000-3:2005 |
Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots. Guide to sampling by variables |
| BS 6001-0:1996 |
Sampling procedures for inspection by attributes. Introduction to the BS 6001 attribute sampling system |
| BS 6001-1:1999 |
Sampling procedures for inspection by attributes. Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| BS 6001-2:1993 |
Sampling procedures for inspection by attributes. Specification for sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| BS 6001-3:2005 |
Sampling procedures for inspection by attributes. Specification for skip-lot sampling procedures |
| BS 6001-4:1994 |
Sampling procedures for inspection by attributes. Specification for sequential sampling plans |
| BS 6001-4:2005 |
Sampling procedures for inspection by attributes. System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| BS 6001-5:2002 |
Sampling procedures for inspection by attributes. Procedures for assessment of declared quality levels |
| BS 6001-7:2001 |
Sampling procedures for inspection by attributes. Credit-based accept-zero sampling schemes for the control of outgoing quality for lot-by-lot inspection |
| BS 6001-9:2002 |
Sampling procedures for inspection by attributes. Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) |
| BS 6002-1:1993 |
Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection |
| BS 6002-3:2005 |
Sampling procedures for inspection by variables. Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| BS 6002-4.1:1994 |
Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation |
| BS 6004:2000 |
Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
| BS 6005:1997 |
Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators |
| BS 6007:2000 |
Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring |
| BS 6008:1980 |
Method for preparation of a liquor of tea for use in sensory tests |
| BS 6010-3:1994 |
Rolling bearings. Bearings with speherical outside surface and extended inner ring width. Specification for dimensions of cast and pressed housings |
| BS 6010-4:1993 |
Rolling bearings. Bearings with spherical outside surface and extended inner ring width. Specification for insert bearings and eccentric locking collars |
| BS 6014:2003 |
Ethylene propylene rubber compounds. Specification |
| BS 6019:1980 |
Recommendations for performance standards in building: contents and presentation |
| BS 6023:1981 |
Glossary of technical terms for automatic steam traps |
| BS 6031:1981 |
Code of practice for earthworks |
| BS 6035-2:1982 |
Methods for determination of the drainability of pulp. 'Canadian Standard' freeness method |
| BS 6037-1:2003 |
Code of practice for the planning, design, installation and use of permanently installed access equipment. Suspended access equipment |
| BS 6037-2:2004 |
Code of practice for the planning, design, installation and use of permanently installed access equipment. Travelling ladders and gantries |
| BS 6040:1981 |
Nomenclature for bolts, screws, nuts and accessories |
| BS 6041:1981 |
Method of sampling of electrodeposited metallic coatings and related finishes: procedures for inspection by attributes |
| BS 6043-1.1:2002 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling. Section 1.1: Sampling |
| BS 6043-1.10:2000 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content. Section 1.10 Determination of volatile matter content |
| BS 6043-1.11:2000 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of the atomic C/H ratio of the quinoline-insoluble material. |
| BS 6043-1.12:1994 |
Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of mesophase content |
| BS 6043-1.13:2000 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content. Section 1.13 Determination of sulfur content |
| BS 6043-1.2:1981 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of water content (Dean and Stark method) |
| BS 6043-1.3:1983 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of softening point (ring and ball method) |
| BS 6043-1.4:1981 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material |
| BS 6043-1.5:1983 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material |
| BS 6043-1.6:1998 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value. Section 1.6 Determination of coking value |
| BS 6043-1.7:1988 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of apparent density (buoyancy method) |
| BS 6043-1.8:1986 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash |
| BS 6043-1.9:1989 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method) |
| BS 6043-2.1:1985 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling |
| BS 6043-2.10:1996 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of electrical resistivity of calcined coke granules |
| BS 6043-2.11:1995 |
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content |