| Standard |
Official Title of Standard |
|
| BS 6368:1983 |
Specification for axial lead cores made of magnetic oxides or iron powder |
| BS 6371:1983 |
Recommendations for citation of unpublished documents |
| BS 6374-1:1985 |
Lining of equipment with polymeric materials for the process idustries. Specification for lining with sheet thermoplastics |
| BS 6374-2:1984 |
Lining of equipment with polymeric materials for the process industries. Specification for lining with non-sheet applied thermoplastics |
| BS 6374-3:1984 |
Lining of equipment with polymeric materials for the process industries. Specification for lining with stoved thermosetting resins |
| BS 6374-4:1984 |
Lining of equipment with polymeric materials for the process industries. Specification for lining with cold curing thermosetting resins |
| BS 6374-5:1985 |
Lining of equipment with polymeric materials for the process industries. Specification for lining with rubbers |
| BS 6375-1:2004 |
Performance of windows and doors. Classification for weathertightness and guidance on selection and specification |
| BS 6375-2:1987 |
Performance of windows. Specification for operation and strength characteristics |
| BS 6376-1:1983 |
Reagents for chemical analysis. Methods of test |
| BS 6376-2:1984 |
Reagents for chemical analysis. Specifications (first series) |
| BS 6376-3:1989 |
Reagents for chemical analysis. Specifications (second series) |
| BS 6379-1:1983 |
Sampling of coffee and coffee products. Method of sampling green coffee in bags |
| BS 6379-3:1983 |
Sampling of coffee and coffee products. Specification for a coffee trier for sampling green coffee |
| BS 6379-4:1991 |
Sampling of coffee and coffee products. Method for preparation of samples of green coffee for use in sensory analysis |
| BS 6380:1997 |
Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869 |
| BS 6381:1983 |
Specification for drawing boards |
| BS 6384:1983 |
Methods for determination of braking performance of agricultural and forestry vehicles |
| BS 638-4:1996 |
Arc welding power sources, equipment and accessories. Specification for welding cables |
| BS 638-5:1988 |
Arc welding power sources, equipment and accessories. Specification for accessories |
| BS 6385:1996 |
Machinery for forestry. Winches. Performance requirements |
| BS 6387:1994 |
Specification for performance requirements for cables required to maintain circuit integrity under fire conditions |
| BS 6388-1:1991 |
Accelerated ageing of paper and board. Method for dry heat treatment at 105$0DC |
| BS 6388-2:1987 |
Accelerated ageing of paper and board. Method for dry heat treatment at 120$0DC or 150$0DC |
| BS 6388-3:1996 |
Accelerated ageing of paper and board. Method for moist heat treatment at 80$0DC and 65% relative humidity |
| BS 6389:1983 |
Methods for determination of operator's field of vision for agricultural tractors |
| BS 6391:1983 |
Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes |
| BS 6392-0:1983 |
Testing of ethanol for industrial use. General introduction |
| BS 6392-1:1983 |
Testing of ethanol for industrial use. Method for detection of alkalinity or determination of acidity to phenolphthalein |
| BS 6392-2:1983 |
Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in small amounts (photometric method) |
| BS 6392-3:1983 |
Testing of ethanol for industrial use. Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method) |
| BS 6392-4:1983 |
Testing of ethanol for industrial use. Method for determination of aldehydes content |
| BS 6392-5:1983 |
Testing of ethanol for industrial use. Method of test for miscibility with water |
| BS 6392-6:1983 |
Testing of ethanol for industrial use. Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method) |
| BS 6392-7:1983 |
Testing of ethanol for industrial use. Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method) |
| BS 6392-8:1983 |
Testing of ethanol for industrial use. Method for determination of esters content |
| BS 6392-9:1983 |
Testing of ethanol for industrial use. Method for determination of permanganate time |
| BS 6393:1987 |
Specification for calibration of stylus instruments |
| BS 6394-2:1985 |
Trace elements in milk and milk products. Method for the determination of iron content (reference method) |
| BS 6395:1983 |
Method for numerical designation of fabric faults by visual inspection |
| BS 6396:2002 |
Electrical systems in office furniture and office screens. Specification |
| BS 6397:1983 |
Specification for scales and sizes for plotting frequency characteristics and polar diagrams |
| BS 6398:1983 |
Specification for bitumen damp-proof courses for masonry |
| BS 6399-1:1996 |
Loading for buildings. Code of practice for dead and imposed loads |
| BS 6399-2:1997 |
Loading for buildings. Code of practice for wind loads |
| BS 6399-3:1988 |
Loading for buildings. Code of practice for imposed roof loads |
| BS 64:1992 |
Specification for normal and high strength steel bolts and nuts for railway rail fishplates |
| BS 6400:1997 |
Specification for installation of domestic sized gas meters (2nd and 3rd family gases) |
| BS 6400-1:2002 |
Specification for installation of domestic-sized gas meters maximum rated capacity not exceeding 6 m$u3/h (2nd and 3rd family gases). Low pressure (2nd family gases) |
| BS 6401:1983 |
Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials |
| BS 6403:1983 |
Specification for simple telex terminals using single channel voice frequency signalling for connection to British Telecommunications telex network |
| BS 6404-12:1993 |
Magnetic materials. Guide to methods of assessment of temperature capability of interlaminar insulation coatings |
| BS 6404-13:1996 |
Magnetic materials. Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
| BS 6404-20:1996 |
Magnetic materials. Resistance and temperature classification of insulation coatings |
| BS 6404-8.1:2001 |
Magnetic materials. Individual materials. Magnetically hard materials. Magnetically hard materials |
| BS 6404-8.6:1988 |
Magnetic materials. Individual materials. Specification for soft magnetic metallic materials |
| BS 6405:1984 |
Specification for non-calibrated short link steel chain (grade 30) for general engineering purposes: class 1 and 2 |
| BS 6407-1:1983 |
Cage pallets for retail use. Specification for collapsible cage pallets rated at 300 kg |
| BS 6407-2:1984 |
Cage pallets for retail use. Guide to the safe handling and use of collapsible cage pallets rated at 300 kg |
| BS 6408:1983 |
Specification for clothing made from coated fabrics for protection against wet weather |
| BS 641:1951 |
Dimensions of small rivets for general purposes |
| BS 6410:1991 |
Methods of test for filter papers |
| BS 6413-2:1983 |
Lubricants, industrial oils and related products (class L). Classification for family F (spindle bearings, bearings and associated clutches) |
| BS 6413-5:1988 |
Lubricants, industrial oils and related products (class L). Classification for family T (turbines) |
| BS 6413-6:1991 |
Lubricants, industrial oils and related products (class L). Classification for family C (gears) |
| BS 6413-7:1988 |
Lubricants, industrial oils and related products (class L). Classification for family M (metalworking) |
| BS 6413-8:1988 |
Lubricants, industrial oils and related products (class L). Classification for family R (temporary protection against corrosion) |
| BS 6416:1983 |
Nomenclature for assembly tools for screws and nuts |
| BS 6419:1983 |
Method for measurement of drawbar pull of earth-moving machinery |
| BS 6422:1983 |
Method for volumetric rating of loader and front loading excavator buckets used for earth-moving |
| BS 6423:1983 |
Code of practice for maintenance of electrical switchgear and controlgear for voltages up to and including 1 kV |
| BS 6429:1989 |
Method for conversion between the two coded character sets of BS 4730 (ISO 646) and BS 6692:Part 2 (ISO 6937-2) and the CCITT international telegraph alphabet No. 2 (ITA 2) |
| BS 643:1970 |
Specification for white metal ingots for capping steel wire ropes |
| BS 6431-1:1983 |
Ceramic floor and wall tiles. Specification for classification and marking, including definitions and characteristics |
| BS 6431-10:1984 |
Ceramic floor and wall tiles. Method for determination of dimensions and surface quality |
| BS 6431-11:1983 |
Ceramic floor and wall tiles. Method for determination of water absorption |
| BS 6431-12:1983 |
Ceramic floor and wall tiles. Method for determination of modulus of rupture |
| BS 6431-13:1986 |
Ceramic floor and wall tiles. Method for determination of scratch hardness of surface according to Mohs |
| BS 6431-14:1983 |
Ceramic floor and wall tiles. Method for determination of resistance to deep abrasion. Unglazed tiles |
| BS 6431-15:1983 |
Ceramic floor and wall tiles. Method for determination of linear thermal expansion |