Glossary of EN, IEC, ISO and BS Standards

BS 1428-D4:1963 Onwards

Standard Official Title of Standard
BS 1428-D4:1963 Microchemical apparatus. Volumetric analysis. Specification for capillary pipettes
BS 1428-D5:1955 Microchemical apparatus. Volumetric analysis. Specification for syringe pattern micro-pipette
BS 1429:1980 Specification for annealed round steel wire for general engineering springs
BS 143 and 1256:2000 Threaded pipe fittings in malleable cast iron and cast copper alloy
BS 1434:1985 Specification for copper for electrical purposes: copper sections in bars, blanks and segments for commutators
BS 1435-2:2005 Rubber hose assemblies for oil suction and discharge services. Recommendations for storage, testing and use
BS 1438:2004 Aggregates. Single-sized aggregates for use as a medium in biological percolating filters
BS 1439:1992 Specification for single-ply wet-creped paper towelling
BS 144:1997 Specification for coal tar creosote for wood preservation
BS 1446:1973 Specification for mastic asphalt (natural rock asphalt fine aggregate) for roads and footways
BS 1447:1988 Specification for mastic asphalt (limestone fine aggregate) for roads, footways and pavings in building
BS 1449-1.1:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification
BS 1449-1.14:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip.
BS 1449-1.8:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip based on formability
BS 1453:1972 Specification for filler materials for gas welding
BS 146:2002 Specification for blastfurnace cements with strength properties outside the scope of BS EN 197-1
BS 1460:1967 Method for determination of apparent density after compaction of precipitated calcium carbonate
BS 1467:1972 Specification for folders and files
BS 1468:1967 Specification for tin anodes and tin salts for electroplating
BS 1473:1972 Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock
BS 148:1998 Specification for unused and reclaimed mineral insulating oils for transformers and switchgear
BS 1486-1:1959 Lubricating nipples. Lubricating nipples and adaptors for use on machinery and vehicles
BS 1486-2:1961 Lubricating nipples. Heavy duty lubricating nipples
BS 1486-4:1981 Lubricating nipples. Specification for hydraulic grease nipples
BS 1489:1972 Specification for the packaging of covered winding wires for electrical purposes
BS 1494-1:1964 Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings
BS 15000-1:2002 IT service management. Specification for service management
BS 15000-2:2003 IT service management. Code of practice for service management
BS 1521:1972 Specification for waterproof building papers
BS 1523-1:1967 Glossary of terms used in automatic controlling and regulating systems. Process and kinetic control
BS 1524:1993 Specification for cellulose acetate moulding materials
BS 1545:1990 Specification for liquid toilet soap
BS 1552:1995 Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
BS 1553-1:1977 Specification for graphical symbols for general engineering. Piping systems and plant
BS 1553-2:1950 Specification for graphical symbols for general engineering. Graphical symbols for power generating plant
BS 1553-3:1950 Graphical symbols for general engineering. Graphical symbols for compressing plant
BS 1560-3.2:1989 Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges. Specification for cast iron flanges
BS 1561:1966 Specification for silver anodes and silver salts for electroplating
BS 1562-2:1973 Specification for agricultural mower and combine-harvester parts. Metric units
BS 1563:1949 Specification. Cast iron sectional tanks (rectangular)
BS 1564:1975 Specification for pressed steel sectional rectangular tanks
BS 1566-1:2002 Copper indirect cylinders for domestic purposes. Open vented copper cylinders. Requirements and test methods
BS 1566-2:1984 Copper indirect cylinders for domestic purposes. Specification for single feed indirect cylinders
BS 1567:1953 Specification for wood door frames and linings
BS 1571-2:1975 Specification for testing of positive displacement compressors and exhausters. Methods for simplified acceptance testing for air compressors and exhausters
BS 1574:1994 Specification for split pins (inch series)
BS 1580:Parts 1 and 2:1962 Specification for Unified screw threads. Diameters $9D in and larger
BS 1580-3:1965 Specification for Unified screw threads. Diameters below $9D in
BS 1583:1986 Specification for one-mark pipettes
BS 1586:1982 Methods for performance testing and presentation of performance data for refrigerant condensing units
BS 159:1992 Specification for high-voltage busbars and busbar connections
BS 1591:1975 Specification for corrosion resisting high silicon iron castings
BS 1595-1:1986 Propan-2-ol (isopropyl alcohol) for industrial use. Specification for propan-2-ol (isopropyl alcohol)
BS 1595-2:1984 Propan-2-ol (isopropyl alcohol) for industrial use. Methods of test
BS 1596:1992 Specification for fibreboard drums
BS 1597:1985 Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations
BS 16:1974 Specification for telegraph material (insulators, pole fittings, etc.)
BS 1600:1991 Specification for dimensions of steel pipe for the petroleum industry
BS 1619-2:1988 Re-usable hypodermic syringes for insulin injection. Specification for syringes for use with insulin of strength 100 units per millilitre
BS 1622:1989 Specification for spreaders for winter maintenance
BS 1625-6 and 4830:1972 Specifications for woven cotton tapes, light, medium and heavy qualities
BS 1629:1989 Recommendation for references to published materials
BS 1635:1990 Recommendations for graphic symbols and abbreviations for fire protection drawings
BS 1640-1:1962 Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought carbon and ferritic alloy steel fittings
BS 1640-2:1962 Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought and cast austenitic chromium-nickel steel fittings
BS 1640-3:1968 Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought carbon and ferritic alloy steel fittings. Metric units
BS 1640-4:1968 Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought and cast austenitic chromium-nickel steel fittings. Metric units
BS 1643:1983 Specification for precision vernier height gauges
BS 1646-1:1979 Symbolic representation for process measurement control functions and instrumentation. Basic requirements
BS 1646-2:1983 Symbolic representation for process measurement control functions and instrumentation. Specification for additional basic requirements
BS 1646-3:1984 Symbolic representation for process measurement control functions and instrumentation. Specification for detailed symbols for instrument interconnection diagrams
BS 1646-4:1984 Symbolic representation for process measurement control functions and instrumentation. Specification for basic symbols for process computer, interface and shared display/control functions
BS 1647-1:1984 pH measurement. Specification for pH scale
BS 1647-2:1984 pH measurement. Specification for reference value standard solutions and operational reference standard solutions
BS 1655:1950 Specification for flanged automatic control valves for the process control industry (face-to-face dimensions)
BS 1657:1950 Specification for buttress threads
BS 1659:1950 Specification for tractive armature direct current neutral track and line relays for railway signalling
BS 1660-1:1992 Machine tapers. Specification for shanks and sockets with self-holding tapers (Morse and metric 5%)
BS 1660-10:1988 Machine tapers. Specification for drill chuck tapers (Jacob and short Morse)
BS 1660-11:1991 Machine tapers. Specification for gauges



© Copyright. . Standards Direct. All Rights Reserved. Terms | Site Map