| Standard |
Official Title of Standard |
|
| BS 7404-4:1991 |
Telecontrol equipment and systems. Specification for performance |
| BS 7405:1991 |
Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits |
| BS 7406:1991 |
Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods |
| BS 7407:1991 |
Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children |
| BS 7409:1996 |
Specification for safety requirements for wheeled child conveyances |
| BS 7410:1991 |
Glossary of terms used in industrial screening |
| BS 7411:1991 |
Specification for lever operated knapsack sprayers |
| BS 7412:2002 |
Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification |
| BS 7414:1991 |
Specification for white PVC-U extruded hollow profiles with heat welded corner joints for plastics windows: materials type B |
| BS 7416:1991 |
Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems |
| BS 7417:1991 |
Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings |
| BS 7419:1991 |
Specification for holding down bolts |
| BS 7420:1991 |
Guide for determination of calorific values of solid, liquid and gaseous fuels (including definitions) |
| BS 7423:1999 |
Specification for safety requirements for children's travel cots of internal base length not less than 900 mm |
| BS 7424:1991 |
Guide to general principles for determination of the bending stiffness of paper and board by static methods |
| BS 7425-2:1991 |
Abrasive grains. Method for determining the capillarity |
| BS 7425-3:1993 |
Abrasive grains. Method for sampling and splitting |
| BS 7425-4:1993 |
Abrasive grains. Specification for test-sieving machines |
| BS 7427:1991 |
Method for determination of titanium dioxide content of paper and board |
| BS 7429:1991 |
Specification for television receivers and monitors for use in education and training |
| BS 743:1970 |
Specification for materials for damp-proof courses |
| BS 7430:1998 |
Code of practice for earthing |
| BS 7431:1991 |
Method for assessing solar water heaters. Elastomeric materials for absorbers, connecting pipes and fittings |
| BS 7433-1:1991 |
Cross recessed machine screws. Specification for pan head screws of product grade A |
| BS 7433-2:1991 |
Cross recessed machine screws. Specification for countersunk flat head screws product grade A and property class 4.8 only |
| BS 7433-3:1991 |
Cross recessed machine screws. Specification for raised countersunk head screws product grade A |
| BS 7436:1996 |
Specification for data transfer between agricultural tractors and attached machinery (data bus protocol) |
| BS 7438:1991 |
Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type |
| BS 7439:1991 |
Method for exchange of information for the analytical assessment of shock resistance of mechanical systems |
| BS 7440:1991 |
Method for calibrating field pyrheliometers by comparison to a reference pyrheliometer |
| BS 7442-0:1991 |
Rubber or plastics covered rollers. Introduction |
| BS 7442-1:1991 |
Rubber or plastics covered rollers. Glossary of terms |
| BS 7442-2:1991 |
Rubber or plastics covered rollers. Recommendations for technical information to be provided by the purchaser |
| BS 7442-3.1:1998 |
Rubber or plastics covered rollers. Method of test. Determination of apparent hardness (IRHD method) |
| BS 7442-3.2:1991 |
Rubber or plastics covered rollers. Method of test. Determination of Shore hardness |
| BS 7442-3.3:1992 |
Rubber or plastics covered rollers. Method of test. Determination of apparent hardness by the Pusey and Jones method |
| BS 7442-4.1:1992 |
Rubber or plastics covered rollers. Requirements. Specification for apparent hardness |
| BS 7442-4.2:1994 |
Rubber or plastics covered rollers. Requirements. Classification by surface finish |
| BS 7442-4.3:1993 |
Rubber or plastics covered rollers. Requirements. Specification for dimensional tolerances |
| BS 7444:1991 |
Specification for molecular sieves (of type 4A) |
| BS 7445-1:2003 |
Description and measurement of environmental noise. Guide to quantities and procedures |
| BS 7445-2:1991 |
Description and measurement of environmental noise. Guide to the acquisition of data pertinent to land use |
| BS 7445-3:1991 |
Description and measurement of environmental noise. Guide to application to noise limits |
| BS 7446:1991 |
Specification for lead chromate pigments and lead chromate-molybdate pigments for paints |
| BS 7448-1:1991 |
Fracture mechanics toughness tests. Method for determination of $iK$dI$dc critical CTOD and critical $iJ values of metallic materials |
| BS 7448-2:1997 |
Fracture mechanics toughness tests. Method for determination of $iK$dI$dc, critical CTOD and critical $iJ values of welds in metallic materials |
| BS 7448-3:2005 |
Fracture mechanics toughness tests. Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1 |
| BS 7448-4:1997 |
Fracture mechanics toughness tests. Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials |
| BS 7449:1991 |
Specification for inclusion of glass in the construction of furniture, other than tables or trolleys, including cabinets, shelving systems and wall hung or free standing mirrors |
| BS 7450:1991 |
Method for determination of economic optimization of power cable size |
| BS 7451:1991 |
Specification for archival quality bookbinding leather |
| BS 7452:1991 |
Specification for separating transformers, autotransformers, variable transformers and reactors |
| BS 7453-1:1991 |
Procedures for UK registration for Open Systems standards. Procedures for the UK Name Registration Authority |
| BS 7454:1991 |
Method for calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects |
| BS 7455-1:1991 |
Analysis of nickel alloys by flame atomic absorption spectrometry. General requirements and sample dissolution |
| BS 7455-2:1991 |
Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of cobalt |
| BS 7455-3:1991 |
Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of chromium |
| BS 7455-4:1991 |
Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of copper |
| BS 7455-5:1991 |
Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of iron |
| BS 7455-6:1991 |
Analysis of nickel alloys by flame atomic absorption spectrometry. Method for the determination of manganese |
| BS 7455-7:1992 |
Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of aluminium |
| BS 7455-8:1992 |
Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of silicon |
| BS 7455-9:1994 |
Analysis of nickel alloys by flame atomic absorption spectrometry. Method for determination of vanadium |
| BS 7456:1991 |
Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems |
| BS 7457:1994 |
Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
| BS 7459-1:1995 |
Rotating sprinklers for irrigation equipment. Specification for design and operational requirements |
| BS 7459-2:1991 |
Rotating sprinklers for irrigation equipment. Methods of test for uniformity of distribution |
| BS 746:2005 |
Fittings for installation of low pressure gas meters. Requirements and test methods |
| BS 7460:1991 |
Code of practice for use of spray extraction machines on carpets and soft floor coverings in hospitals |
| BS 7461:1991 |
Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control |
| BS 7462:1991 |
Specification for electrical safety of domestic gas appliances |
| BS 7463-1:1991 |
Fibre furnish analysis of paper, board and pulps. General method |
| BS 7463-2:1991 |
Fibre furnish analysis of paper, board and pulps. Guide to staining |
| BS 7463-3:1991 |
Fibre furnish analysis of paper, board and pulps. Method of test by Herzberg stain |
| BS 7463-4:1991 |
Fibre furnish analysis of paper, board and pulps. Method of test by Graff 'C' stain |
| BS 7463-5:1991 |
Fibre furnish analysis of paper, board and pulps. Method of test by Lofton-Merritt stain (Wisbar modification) |
| BS 7463-6:1995 |
Fibre furnish analysis of paper, board and pulps. Determination of fibre coarseness |
| BS 7463-7:1995 |
Fibre furnish analysis of paper, board and pulps. Determination of weight factors |
| BS 7464:1991 |
Specification for anchor winches for mobile offshore units |
| BS 7465:1991 |
Glossary of terms for ships windows and side scuttles |