| Standard |
Official Title of Standard |
|
| BS 7671:2001 |
Requirements for electrical installations. IEE Wiring Regulations. Sixteenth edition |
| BS 7672:1993 |
Specification for compression, stiffness and labelling of anti-embolism hosiery |
| BS 7674:1993 |
Nuclear power plants. Instrumentation and control systems important for safety. Requirements for electrical supplies |
| BS 7675:1993 |
Plain bearings. Thin-walled half bearings. Checking of peripheral length |
| BS 7676-2:1993 |
Acceptance code for gears. Determination of mechanical vibrations of gear units during acceptance testing |
| BS 7677:1993 |
Recommendations for classification of imperfections in pipe joint rings |
| BS 7679:1993 |
Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics |
| BS 768:1958 |
Specification for slotted grub screws |
| BS 7686:1993 |
Test methods for submerged-arc furnaces |
| BS 7688:1993 |
Test methods for electro-slag remelting furnaces |
| BS 7689:1993 |
Test methods for electroheating installations with electron guns |
| BS 7690:1993 |
Test methods for induction channel furnaces |
| BS 7691:1994 |
Methods for testing resistance to environmental conditions of electronic equipment used in agriculture and horticulture |
| BS 7693:1993 |
Guide to uses of infra-red transmission and the prevention or control of interference between systems |
| BS 7694:1993 |
Glossary of terms for test sieves and test sieving |
| BS 7697:1993 |
Nominal voltages for low voltage public electricity supply systems |
| BS 7698-1:1993 |
Reciprocating internal combustion engine driven alternating current generating sets. Specification for application, ratings and performance |
| BS 7698-10:1999 |
Reciprocating internal combustion engine driven alternating current generating sets. Measurement of airborne noise by the enveloping surface method |
| BS 7698-12:1998 |
Reciprocating internal combustion engine driven alternating current generating sets. Emergency power supply to safety devices |
| BS 7698-2:1993 |
Reciprocating internal combustion engine driven alternating current generating sets. Specification for engines |
| BS 7698-3:1993 |
Reciprocating internal combustion engine driven alternating current generating sets. Specification for alternating current generators for generating sets |
| BS 7698-4:1993 |
Reciprocating internal combustion engine driven alternating current generating sets. Specification for controlgear and switchgear |
| BS 7698-5:1993 |
Reciprocating internal combustion engine driven alternating current generating sets. Specification for generating sets |
| BS 7698-6:1993 |
Reciprocating internal combustion engine driven alternating current generating sets. Test methods |
| BS 7698-7:1996 |
Reciprocating internal combustion engine driven alternating current generating sets. Technical declarations for specification and design |
| BS 7698-8:1996 |
Reciprocating internal combustion engine driven alternating current generating sets. Requirements and tests for low-power generating sets |
| BS 7698-9:1996 |
Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations |
| BS 7699-8:1994 |
Specification for safety in electroheat installations. Particular requirements for electro-slag remelting furnaces |
| BS 7700:1994 |
Micaceous iron oxide pigments for paints. Specifications and test methods |
| BS 770-1:1986 |
Methods for chemical analysis of cheese. General introduction |
| BS 7701:1993 |
Specification for float-type level gauges for measuring liquid levels in tanks containing refrigerated light-hydrocarbon fluids |
| BS 770-11:1997 |
Methods for chemical analysis of cheese. Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents in processed cheese and processed cheese products |
| BS 770-2:1976 |
Methods for chemical analysis of cheese. Determination of water content (reference and routine methods) |
| BS 7702:1993 |
Guide to volumetric metering of viscous hydrocarbons |
| BS 7704:1993 |
Specifications for silicone liquids for electrical purposes |
| BS 770-5:1976 |
Methods for chemical analysis of cheese. Determination of pH value |
| BS 7705:1993 |
Specification for brake systems for special wheeled forestry machines |
| BS 770-6:1984 |
Methods for chemical analysis of cheese. Determination of total phosphorus content. Molecular absorption spectrometric method |
| BS 7706:1993 |
Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws |
| BS 7707:1993 |
Specification for power presses, mechanical straight-sided single-action type from 400 kN up to and including 4000 kN nominal force |
| BS 770-7:1997 |
Methods for chemical analysis of cheese. Determination of citric acid content of cheese and processed cheese products (enzymatic method) |
| BS 770-8:1987 |
Methods for chemical analysis of cheese. Determination of nitrogen content (reference method) |
| BS 7708:1993 |
Specification for power presses, mechanical straight-sided high-speed type of 250 kN up to 4000 kN nominal force |
| BS 770-9:1985 |
Methods for chemical analysis of cheese. Determination of nitrate and nitrite contents. Cadmium reduction and photometry method |
| BS 7709-1:1993 |
Analysis of extract solutions of glass. Method for determination of silicon dioxide by molecular absorption spectrometry |
| BS 7709-2:1993 |
Analysis of extract solutions of glass. Method for determination of sodium oxide and potassium oxide by flame spectrometric methods |
| BS 7709-3:1993 |
Analysis of extract solutions of glass. Method for determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry |
| BS 7709-4:1993 |
Analysis of extract solutions of glass. Method for determination of aluminium oxide by molecular absorption spectrometry |
| BS 7709-5:1993 |
Analysis of extract solutions of glass. Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry |
| BS 7709-6:1993 |
Analysis of extract solutions of glass. Method for determination of boron (III) oxide by molecular absorption spectrometry |
| BS 771:1992 |
Specification for phenolic moulding materials |
| BS 7710-1:1993 |
Urine absorbing aids. Vocabulary. Conditions of urinary incontinence |
| BS 7710-2:1993 |
Urine absorbing aids. Vocabulary. Products |
| BS 7710-3:1993 |
Urine absorbing aids. Vocabulary. Identification of product types |
| BS 7713:1993 |
Guide for the maintenance of silicone transformer liquids |
| BS 7714:2005 |
Care and handling of seals for fluid power applications. Guide |
| BS 7715:1994 |
Specification for prevailing torque type bolts, screws and studs with non-metallic prevailing torque elements incorporated into the thread |
| BS 7719:1994 |
Specification for water-borne emulsion paints for interior use |
| BS 7722:2002 |
Surface covered PVC-U profiles for windows and doors. Specification |
| BS 7723-2:1994 |
Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Optical-reference-line method |
| BS 7723-3:1994 |
Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Optical-triangulation method |
| BS 7723-4:1995 |
Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Internal electro-optical distance-ranging method |
| BS 7724:1994 |
Specification for split pins (metric series) |
| BS 7725-1:1994 |
Evaluation and routine testing in medical imaging departments. General |
| BS 7725-2.1:1994 |
Evaluation and routine testing in medical imaging departments. Constancy tests. Method for film processors |
| BS 7725-2.2:1994 |
Evaluation and routine testing in medical imaging departments. Constancy tests. |
| BS 7725-2.3:1994 |
Evaluation and routine testing in medical imaging departments. Constancy tests. Method for darkroom safelight conditions |
| BS 7727:1994 |
Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm$u2 (10AWG) |
| BS 7729:1994 |
Specification for instrument transformers. Three-phase voltage transformers for voltage levels having $iU$dm up to 52 kV |
| BS 7730:1994 |
Method for liquid penetrant inspection of metallic surgical implants |
| BS 7731:1994 |
Method for radiographic examination of cast metallic surgical implants |
| BS 7735:1994 |
Guide to loading of oil-immersed power transformers |
| BS 7737-1:1995 |
Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. General |
| BS 7737-2:1995 |
Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Resonance methods |
| BS 7738-1:1994 |
Specification for information systems products using SSADM (Structured Systems Analysis and Design Method). Implementation of SSADM version 4 |
| BS 7744:1994 |
Guide to artificial pollution tests on high voltage insulators to be used on d.c. systems |
| BS 7745-1:1994 |
End mills with brazed helical hardmetal tips. Dimensions of end mills with parallel shank |
| BS 7745-2:1994 |
End mills with brazed helical hardmetal tips. Dimensions of end mills with taper shank |
| BS 7747:1994 |
Forestry machinery. Portable brush cutters and grass trimmers. Cutting attachment guard strength |
| BS 7751-1:1994 |
Prevailing torque type wire thread inserts. Specification for ISO metric coarse pitch threads |