| Standard |
Official Title of Standard |
|
| BS 8434-2:2003 |
Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 with a 930$0DC flame and with water spray |
| BS 8435:2005 |
Small craft. Reserve flotation. Boats up to six metres length of hull |
| BS 8436:2004 |
Electric cables. 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables |
| BS 8437:2005 |
Code of practice for selection, use and maintenance of personal fall protection systems and equipement for use in the workplace |
| BS 8438:2004 |
Troughed belt conveyors. Specification |
| BS 8439:2005 |
Continuous handling equipment and systems. Guide to properties of powders and bulk materials |
| BS 8440-1:2005 |
Health informatics. Medical digital imaging. Profiles format. General principles |
| BS 8440-2:2005 |
Health informatics. Medical digital imaging. Profiles format. Particular requirements for metadata profiles |
| BS 8444-3:1996 |
Risk management. Guide to risk analysis of technological systems |
| BS 8446:2005 |
Specification for the installation and maintenance of open-flued, non-domestic gas-fired laundry appliances |
| BS 8447:2005 |
Anaesthetic and respiratory equipment. Hook-on fittings for the attachment of vaporizers to an anaesthetic gas delivery device |
| BS 8449:2005 |
Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures |
| BS 845-1:1987 |
Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids. Concise procedure |
| BS 8451:2004 |
Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification |
| BS 845-2:1987 |
Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids. Comprehensive procedure |
| BS 8452:2005 |
Use of clamp-on (externally mounted) transit time metering techniques for liquid applications. Guide |
| BS 8456:2005 |
Code of practice for design and installation of directional sounder evacuation systems |
| BS 8459:2005 |
Determination of extractable matter in textiles. Method |
| BS 848-1:1997 |
Fans for general purposes. Performance testing using standardized airways |
| BS 848-10:1999 |
Fans for general purposes. Performance testing of jet fans |
| BS 848-2.6:2000 |
Fans for general purposes. Methods of noise testing. Airborne noise emitted by small air-moving devices. Section 6: Airborne noise emitted by small air-moving devices |
| BS 848-3:2001 |
Fans for general purposes. Performance testing in situ |
| BS 848-4:1997 |
Fans for general purposes. Dimensions |
| BS 848-5:1999 |
Fans for general purposes. Special for mechanical safety (guarding) |
| BS 848-7:2003 |
Fans for general purposes. Specifications for balancing and vibration |
| BS 848-8:1999 |
Fans for general purposes. Vocabulary and definition of categories |
| BS 8500-1:2002 |
Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier |
| BS 8500-2:2002 |
Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete |
| BS 8501:2002 |
Graphical symbols and signs. Public information symbols |
| BS 8502:2003 |
Graphical symbols and signs. Creation and design of public information symbols. Requirements |
| BS 852:1939 |
Specification for toolmakers' straightedges |
| BS 853-1:1996 |
Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply |
| BS 853-2:1996 |
Specification for vessels for use in heating systems. Tubular heat exchangers and storage vessels for building and industrial services |
| BS 855:1990 |
Specification for welded steel boilers for central heating and indirect hot water supply (rated output 44 kW to 3 MW) |
| BS 8555:2003 |
Environmental management systems. Guide to the phased implementation of an environmental management system including the use of environmental performance evaluation |
| BS 856:1969 |
Specification for wing nuts |
| BS 857:1967 |
Specification for safety glass for land transport |
| BS 8621:2004 |
Thief resistant lock assemblies. Keyless egress |
| BS 864-2:1983 |
Capillary and compression tube fittings of copper and copper alloy. Specification for capillary and compression fittings for copper tubes |
| BS 864-3:1975 |
Capillary and compression tube fittings of copper and copper alloy. Compression fittings for polyethylene pipes |
| BS 864-5:1990 |
Capillary and compression tube fittings of copper and copper alloy. Specification for compression fittings for polyethylene pipes with outside diameters to BS 5556 |
| BS 8666:2000 |
Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete |
| BS 869:1978 |
Specification for toolmakers' flats and high precision surface plates |
| BS 870:1950 |
Specification for external micrometers |
| BS 8726-1:2002 |
Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Compression springs |
| BS 8726-2:2002 |
Cylindrical helical springs made from rectangular and square section wire and bar. Guide to calculation and design. Torsion springs |
| BS 873-1:1983 |
Road traffic signs and internally illuminated bollards. Methods of test |
| BS 873-2:1984 |
Road traffic signs and internally illuminated bollards. Specification for miscellaneous signs |
| BS 873-3:1980 |
Road traffic signs and internally illuminated bollards. Specification for internally illuminated bollards |
| BS 873-4:1987 |
Road traffic signs and internally illuminated bollards. Specification for road studs |
| BS 873-7:1984 |
Road traffic signs and internally illuminated bollards. Specification for posts and fittings |
| BS 874:1973 |
Methods for determining thermal insulating properties with definitions of thermal insulating terms |
| BS 874-1:1986 |
Methods for determining thermal insulating properties. Introduction, definitions and principles of measurement |
| BS 874-3.1:1987 |
Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance. Guarded hot-box method |
| BS 874-3.2:1990 |
Methods for determining thermal insulating properties. Tests for thermal transmittance and conductance. Calibrated hot-box method |
| BS 876:1995 |
Specification for hand hammers |
| BS 8766:2004 |
Names and identifiers of individuals and groups. Data structure for interoperability. Specification |
| BS 879-1:1985 |
Water well casing. Specification for steel tubes for casing |
| BS 879-2:1988 |
Water well casing. Specification for thermoplastics tubes for casing and slotted casing |
| BS 8800:2004 |
Occupational health and safety management systems. Guide |
| BS 88-2.2:1988 |
Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application). |
| BS 88-5:1988 |
Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification of supplementary requirements for fuse-links for use in a.c. electricity supply networks |
| BS 8855-2:2000 |
Soil analysis. Method for determination of coal tar-derived phenolic compounds |
| BS 88-6:1988 |
Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. |
| BS 887:1982 |
Specification for precision vernier callipers |
| BS 8888:2004 |
Technical product specification (TPS). Specification |
| BS 89-2:1990 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for ammeters and voltmeters |
| BS 89-3:1990 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for wattmeters and varmeters |
| BS 894:1956 |
Specification for Ubbelohde apparatus for flow and drop points |
| BS 89-4:1990 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for frequency meters |
| BS 89-5:1990 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for phase meters, power factor meters and synchroscopes |
| BS 89-6:1990 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for ohmmeters (impedance meters) and conductance meters |
| BS 89-7:1990 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for multi-function instruments |
| BS 89-8:1990 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Specification for special requirements for accessories |
| BS 89-9:1990 |
Direct acting indicating analogue electrical measuring instruments and their accessories. Recommended test methods |
| BS 8F 35:2002 |
Braided linen (flax) lacing cord for aerospace purposes |
| BS 90:1975 |
Specification for direct-acting electrical recording instruments and their accessories |
| BS 9000-1:1989 |
General requirements for a system for electronic components of assessed quality. Specification of general procedures |
| BS 9000-2:1996 |
General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the CECC system |
| BS 9000-3:1996 |
General requirements for a system for electronic components of assessed quality. Specification for the national implementation of the IECQ system |