| Standard No |
Title of Standard |
|
| EN 1240:1998 |
Adhesives. Determination of hydroxyl value and/or hydroxyl content |
| EN 12400:2002 |
Windows and pedestrian doors. Mechanical durability. Requirements and classification |
| EN 12402:1999 |
Lead and lead alloys. Methods of sampling for analysis |
| EN 12405-1:2005 |
Gas meters. Conversion devices. Volume conversion |
| EN 12406:1999 |
Swap bodies. Thermal swap bodies of class C. Dimensions and general requirements |
| EN 12407:2000 |
Natural stone test methods. Petrographic examination |
| EN 12408:2004 |
Safety requirements for cableways installations designed to carry person. Quality control |
| EN 12409:1999 |
Rubber and plastics machines. Thermoforming machines. Safety requirements |
| EN 1241:1998 |
Adhesives. Determination of acid value |
| EN 12410:1999 |
Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements |
| EN 12412-2:2003 |
Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Frames |
| EN 12412-4:2003 |
Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Roller shutter boxes |
| EN 12413:1999 |
Safety requirements for bonded abrasive products |
| EN 12414:1999 |
Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements |
| EN 12415:2001 |
Safety of machine tools. Small numerically controlled turning machines and turning centres |
| EN 12416-1:2001 |
Fixed firefighting systems. Powder systems. Requiremments and test methods for components |
| EN 12416-2:2001 |
Fixed firefighting systems. Powder systems. Design, construction and maintenance |
| EN 12417:2001 |
Machine tools. Safety. Machining centres |
| EN 12418:2000 |
Masonry and stone cutting-off machines for job site. Safety |
| EN 1242:1998 |
Adhesives. Determination of isocyanate content |
| EN 12420:1999 |
Copper and copper alloys. Forgings |
| EN 12421:1998 |
Magnesium and magnesium alloys. Unalloyed magnesium |
| EN 12422:1999 |
Sisal twines |
| EN 12423:1999 |
Polypropylene twines |
| EN 12424:2000 |
Industrial, commercial and garage doors and gates. Resistance to wind load. Classification |
| EN 12425:2000 |
Industrial, commercial and garage doors and gates. Resistance to water penetration. Classification |
| EN 12426:2000 |
Industrial, commercial and garage doors and gates. Air permeability. Classification |
| EN 12427:2000 |
Industrial, commercial and garage doors and gates. Air permeability. Test method |
| EN 12428:2000 |
Industrial, commercial and garage doors and gates. Thermal transmittance. Requirements for the calculation |
| EN 12429:1998 |
Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions |
| EN 1243:1999 |
Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| EN 12430:1998 |
Thermal insulating products for building applications. Determination of behaviour under point load |
| EN 12431:1998 |
Thermal insulating products for building applications. Determination of thickness for floating floor insulating products |
| EN 12432:1998 |
Gymnastic equipment. Balancing beams. Functional and safety requirements, test methods |
| EN 12433-1:2000 |
Industrial, commercial, and garage doors and gates. Terminology. Types of doors |
| EN 12433-2:2000 |
Industrial, commercial, and garage doors and gates. Terminology. Parts of doors |
| EN 12434:2000 |
Cryogenic vessels. Cryogenic flexible hoses |
| EN 12436:2002 |
Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements |
| EN 12438:1998 |
Magnesium and magnesium alloys. Magnesium alloys for cast anodes |
| EN 12439:1999 |
Sterile rectal catheters for single use |
| EN 1244:1998 |
Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| EN 12440:2001 |
Natural stone. Denomination criteria |
| EN 12441-1:2002 |
Zinc and zinc alloys. Chemical analysis. Determination of aluminium in zinc alloys. Titrimetric method |
| EN 12441-10:2004 |
Zinc and zinc alloys. Chemical analysis. Determination of chromium and titanium in zinc alloys. Spectrophotometric method |
| EN 12441-2:2002 |
Zinc and zinc alloys. Chemical analysis. Determination of magnesium in zinc alloys. Flame atomic absorption spectrometric method |
| EN 12441-3:2002 |
Zinc and zinc alloys. Chemical analysis. Determination of lead, cadmium and copper. Flame atomic absorption spectometric method |
| EN 12441-4:2003 |
Zinc and zinc alloys. Chemical analysis. Determination of iron in zinc alloys. Spectrophotometric method |
| EN 12441-5:2003 |
Zinc and zinc alloys. Chemical analysis. Determination of iron in primary zinc. Spectrophotometric method |
| EN 12441-6:2003 |
Zinc and zinc alloys. Chemical analysis. Determination of aluminium and iron. Flame atomic absorption spectrometric method |
| EN 12441-7:2004 |
Zinc and zinc alloys. Chemical analysis. Determination of tin. Flame atomic absorption spectrometric method after extraction |
| EN 12441-8:2004 |
Zinc and zinc alloys. Chemical analysis. Detection of tin in secondary zinc. Flame atomic absorption spectrometric method |
| EN 12441-9:2004 |
Zinc and zinc alloys. Chemical analysis. Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method |
| EN 12442-1:2000 |
Animal tissues and their derivatives utilized in the manufacture of medical devices. Analysis and management of risk |
| EN 12442-2:2000 |
Animal tissues and their derivatives utilized in the manufacture of medical devices. Controls on sourcing, collection and handling |
| EN 12442-3:2000 |
Animal tissues and their derivatives utilized in the manufacture of medical devices. Validation of the elimination and/or inactivation of viruses and transmissible agents |
| EN 12444:2001 |
Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation |
| EN 12445:2001 |
Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods |
| EN 12446:2003 |
Chimneys. Components. Concrete outer wall elements |
| EN 12447:2001 |
Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water |
| EN 12449:1999 |
Copper and copper alloys. Seamless, round tubes for general purposes |
| EN 1245:1999 |
Adhesives. Determination of pH. Test method |
| EN 12450:1999 |
Copper and copper alloys. Seamless, round copper capillary tubes |
| EN 12451:1999 |
Copper and copper alloys. Seamless, round tubes for heat exchangers |
| EN 12452:1999 |
Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
| EN 12453:2001 |
Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements |
| EN 12454:1998 |
Founding. Visual examination of surface discontinuities. Steel sand castings |
| EN 12455:1999 |
Resilient floor coverings. Specification for corkment underlay |
| EN 12457-1:2002 |
Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. |
| EN 12457-2:2002 |
Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. |
| EN 12457-3:2002 |
Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. |
| EN 12457-4:2002 |
Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. |
| EN 12458:1999 |
Surface active agents. Determination of stability in hard water |
| EN 1246:1998 |
Adhesives. Determination of ash and sulfated ash |
| EN 12460:1998 |
Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk |
| EN 12461:1998 |
Biotechnology. Large-scale process and production. Guidance for the handling, inactivating and testing of waste |
| EN 12462:1998 |
Biotechnology. Performance criteria for pumps |
| EN 12463:2004 |
Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements |
| EN 12464-1:2002 |
Light and lighting. Lighting of work places. Indoor work places |
| EN 12465:2001 |
Wood poles for overhead lines. Durability requirements |
| EN 12466:1998 |
Resilient floor coverings. Vocabulary |
| EN 12467:2004 |
Fibre-cement flat sheets. Product specification and test methods |
| EN 12468:1998 |
Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate releases of genetically modified plants |
| EN 12469:2000 |
Biotechnology. Performance criteria for microbiological safety cabinets |
| EN 1247:2004 |
Foundry machinery. Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi-continuous casting machines |
| EN 12470-1:2000 |
Clinical thermometers. Metallic liquid-in-glass thermometers with maximum device |
| EN 12470-2:2001 |
Clinical thermometers. Phase change type (dot matrix) thermometers |
| EN 12470-3:2000 |
Clinical thermometers. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device |
| EN 12470-4:2001 |
Clinical thermometers. Performance of electrical thermometers for continuous measurement |
| EN 12470-5:2003 |
Clinical thermometers. Performance of infra-red ear thermometers (with maximum device) |
| EN 12472:1999 |
Method for the simulation of wear and corrosion for the detection of nickel release from coated items |
| EN 12473:2000 |
General principles of cathodic protection in sea water |
| EN 12474:2001 |
Cathodic protection for submarine pipelines |
| EN 12475-1:1998 |
Classification of dense shaped refractory products. Alumina-silica products |
| EN 12475-2:1998 |
Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon |
| EN 12475-3:1998 |
Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon |
| EN 12475-4:1999 |
Classification of dense shaped refractory products. Special products |
| EN 12476:2000 |
Phosphate conversion coatings of metals. Method of specifying requirements |
| EN 12477:2001 |
Protective gloves for welders |
| EN 12478:2001 |
Safety of machine tools. Large numerically controlled turning machines and turning centres |
| EN 12479:2002 |
Wood poles for overhead lines. Sizes. Methods of measurement and permissible deviations |
| EN 1248:2001 |
Foundry machinery. Safety requirements for abrasive blasting equipment |
| EN 12480:2002 |
Gas meters. Rotary displacement gas meters |
| EN 12481:2001 |
Self adhesive tapes. Terminology |
| EN 12482-1:1998 |
Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for hot rolled reroll stock |
| EN 12482-2:1998 |
Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for cold rolled reroll stock |
| EN 12483:1999 |
Liquid pumps. Pump units with frequency inverters. Guarantee and compatibility tests |
| EN 12484-1:1999 |
Irrigation techniques. Automatic turf irrigation systems. Definition of the programme of equipment by the owner |
| EN 12484-2:2000 |
Irrigation techniques. Automatic turf irrigation systems. Design and definition of typical technical templates |
| EN 12484-3:2000 |
Irrigation techniques. Automatic turf irrigation systems. Automatic control and system management |
| EN 12484-4:2002 |
Irrigation techniques. Automatic turf irrigation systems. Installation and acceptance |
| EN 12484-5:2002 |
Irrigation techniques. Automatic turf irrigation systems. Testing methods of systems |
| EN 12485:2001 |
Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime and half-burnt dolomite. Test methods |
| EN 12487:2000 |
Corrosion protection of metals. rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| EN 12489:2000 |
Industrial, commercial and garage doors and gates. Resistance to water penetration. Test method |
| EN 12490:1999 |
Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood |