| Standard No |
Title of Standard |
|
| EN 13523-11:2004 |
Coil coated metals. Test methods. Resistance to solvents (rubbing test) |
| EN 13523-12:2004 |
Coil coated metals. Test methods. Resistance to scratching |
| EN 13523-13:2001 |
Coil coated metals. Test methods. Resistance to accelerated ageing by the use of heat |
| EN 13523-14:2001 |
Coil coated metals. Test methods. Chalking (Helmen method) |
| EN 13523-15:2002 |
Coil coated metals. Test methods. Metamerism |
| EN 13523-16:2004 |
Coil coated metals. Test methods. Resistance to abrasion |
| EN 13523-17:2004 |
Coil coated metals. Test methods. Adhesion of strippable films |
| EN 13523-18:2002 |
Coil coated metals. Test methods. Resistance to staining |
| EN 13523-19:2004 |
Coil coated metals. Test methods. Panel design and method of atmospheric exposure testing |
| EN 13523-2:2001 |
Coil coated metals. Test methods. Specular gloss |
| EN 13523-20:2004 |
Coil coated metals. Test methods. Foam adhesion |
| EN 13523-21:2003 |
Coil coated metals. Test methods. Evaluation of outdoor exposed panels |
| EN 13523-22:2003 |
Coil coated metals. Test methods. Colour difference. Visual comparison |
| EN 13523-23:2002 |
Coil coated metals. Test methods. Colour stability in humid atmospheres containing sulfur dioxide |
| EN 13523-24:2004 |
Coil coated metals. Test methods. Resistance to blocking and pressure marking |
| EN 13523-3:2001 |
Coil coated metals. Test methods. Colour difference. Instrumental comparison |
| EN 13523-4:2001 |
Coil coated metals. Test methods. Pencil hardness |
| EN 13523-5:2001 |
Coil coated metals. Test methods. Resistance to rapid deformation (impact test) |
| EN 13523-6:2002 |
Coil coated metals. Test methods. Adhesion after indentation (cupping test) |
| EN 13523-7:2001 |
Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test) |
| EN 13523-8:2002 |
Coil coated metals. Test methods. Resistance to salt spray (fog) |
| EN 13523-9:2001 |
Coil coated metals. Test methods. Resistance to water immersion |
| EN 13524:2003 |
Highway maintenance machines. Safety requirements |
| EN 13525:2005 |
Forestry machinery. Wood chippers. Safety |
| EN 13526:2002 |
Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes. |
| EN 13527:2000 |
Shutters and blinds. Measurement of operating force. Test methods |
| EN 13528-1:2002 |
Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. General requirements |
| EN 13528-2:2002 |
Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Specific requirements and test methods |
| EN 13528-3:2003 |
Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods. Guide to selection, use and maintenance |
| EN 13529:2003 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack |
| EN 1353:1997 |
Determination of moisture content of autoclaved aerated concrete |
| EN 13530-1:2002 |
Cryogenic vessels. Large transportable vacuum insulated vessels. Fundamental requirements |
| EN 13530-2:2002 |
Cryogenic vessels. Large transportable vacuum insulated vessels. Design, fabrication, inspection and testing |
| EN 13530-3:2002 |
Cryogenic vessels. Large transportable vacuum insulated vessels. Operational requirements |
| EN 13531:2001 |
Earth-moving machinery. Tip-over protection structure (TOPS) for compact excavators. Laboratory tests and performance requirements |
| EN 13532:2002 |
General requirements for in vitro diagnostic medical devices for self-testing |
| EN 13535:2001 |
Fertilizers and liming materials. Classification |
| EN 13536:2002 |
Manufactured articles filled with feather and down. Requirements for clothing. Light use |
| EN 13537:2002 |
Requirements for sleeping bags |
| EN 13538-1:2002 |
Determination of dimensional characteristics of sleeping bags. Internal dimensions |
| EN 13538-2:2002 |
Determination of dimensional characteristics of sleeping bags. Thickness and elastic recovery |
| EN 13538-3:2002 |
Determination of dimensional characteristics of sleeping bags. Volume under load and easiness of packing |
| EN 1354:1997 |
Determination of compressive strength of lightweight aggregate concrete with open structure |
| EN 13540:2002 |
Leather. Physical and mechanical tests. Determination of heat resistance of patent leather |
| EN 13541:2001 |
Glass in building. Security glazing. Testing and classification of resistance against explosion pressure |
| EN 13542:2001 |
Manufactured articles filled with feather and down. Method for determining the compressibility index of clothing |
| EN 13543:2001 |
Manufactured articles filled with feather and down. Measurement of water absorption of filling material |
| EN 13544-1:2001 |
Respiratory therapy equipment. Nebulizing systems and their components |
| EN 13544-2:2002 |
Respiratory therapy equipment. Tubing and connectors |
| EN 13544-3:2001 |
Respiratory therapy equipment. Air entrainment devices |
| EN 13545:2002 |
Pallet superstructures. Pallet collars. Test methods and performance requirements |
| EN 13546:2002 |
Protective clothing. Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goalkeepers, and shin protectors for field players. Requirements and test methods |
| EN 13549:2001 |
Cleaning services. Basic requirements and recommendations for quality measuring systems |
| EN 1355:1997 |
Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 13551:2003 |
Inland navigation vessels. Vocabulary |
| EN 13553:2002 |
Resilient floor coverings. Polyvinyl chloride floor coverings for use in special wet areas. Specification |
| EN 13554:2002 |
Non-destructive testing. Acoustic emission. General principles |
| EN 13555:2004 |
Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| EN 13556:2003 |
Round and sawn timber. Nomenclature of timbers used in Europe |
| EN 13557:2003 |
Cranes. Controls and control stations |
| EN 13558:2003 |
Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes |
| EN 13559:2003 |
Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes |
| EN 1356:1997 |
Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load |
| EN 13560:2001 |
Surface active agents. Determination of amide nitrogen content. Potentiometric titration |
| EN 13561:2004 |
External blinds. Performance requirements including safety |
| EN 13562:2000 |
Geotextiles and geotextile-related products. Determination of resistance to penetration by water (hydrostatic pressure test) |
| EN 13564-1:2002 |
Anti-flooding devices for buildings. Requirements |
| EN 13564-2:2002 |
Anti-flooding devices for buildings. Test methods |
| EN 13564-3:2003 |
Anti-flooding devices for buildings. Quality assurance |
| EN 13565-1:2003 |
Fixed firefighting systems. Foam systems. Requirements and test methods for components |
| EN 13566-1:2002 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. General |
| EN 13566-3:2002 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with close fit pipes |
| EN 13566-4:2002 |
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with cured-in-place pipes |
| EN 13567:2002 |
Protective clothing. Hand, arm, chest, abdomen, leg, genital and face protectors for fencers. Requirements and test methods |
| EN 13569:2001 |
Cabinet roller towels. Performance requirements and processing |
| EN 13570:2005 |
Food processing machinery. Mixers and mixing machines. Safety and hygiene requirements |
| EN 13571:2002 |
Footwear. Test methods for uppers, lining and insocks. Tear strength |
| EN 13572:2002 |
Footwear. Test methods for uppers, lining and insocks. Seam strength |
| EN 13573:2001 |
Inland navigation vessels. Anchoring, coupling, towing, hauling and mooring systems |
| EN 13574:2001 |
Inland navigation vessels. Permanently installed climbing devices with a length not exceeding 5 m |
| EN 13575:2004 |
Thermoplastics tanks made from blow or rotational moulded polyethylene. Tanks for the above ground storage of chemicals. Requirements and test methods |
| EN 13578:2003 |
Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete |
| EN 13579:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation |
| EN 13580:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Water absorption and resistance to alkali for hydrophobic impregnations |
| EN 13581:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
| EN 13583:2001 |
Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance |
| EN 13584:2003 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products |
| EN 13585:2002 |
Foodstuffs. Determination of fumonisins B1 and B2 in maize. HPLC method with solid phase extraction clean-up |
| EN 13586:2004 |
Cranes. Access |
| EN 13587:2003 |
Methods of test for petroleum and its products. BS2000-519. Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method |
| EN 13588:2004 |
Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test |
| EN 13589:2003 |
Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method |
| EN 1359:1999 |
Gas meters. Diaphragm gas meters |
| EN 13590:2003 |
Packaging. Flexible carrier bags for the transport of various retail goods. General characteristics and test methods for the determination of volume and carrying capacity |
| EN 13592:2003 |
Plastics sacks for household waste collection. Types, requirements and test methods |
| EN 13593:2003 |
Packaging. Paper sacks for household waste collection. Types, requirements and test methods |
| EN 13594:2002 |
Protective gloves for professional motorcycle riders. Requirements and test methods |
| EN 13595-1:2002 |
Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. General requirements |
| EN 13595-2:2002 |
Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of impact abrasion resistance |
| EN 13595-3:2002 |
Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test method for determination of burst strength |
| EN 13595-4:2002 |
Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits. Test methods for the determination of impact cut resistance |
| EN 13596:2004 |
Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of bond strength |
| EN 13597:2003 |
Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs |
| EN 13598-1:2003 |
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). |
| EN 13599:2002 |
Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
| EN 136:1998 |
Respiratory protective devices. Full face masks. Requirements, testing, marking |
| EN 1360:1997 |
Rubber hoses and hose assemblies for measured fuel dispensing. Specification |
| EN 13600:2002 |
Copper and copper alloys. Seamless copper tubes for electrical purposes |
| EN 136000:1993 |
Harmonized system of quality assessment for electronic components: generic specification: magnetrons |
| EN 136001:1996 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: pulsed magnetrons (excluding frequency agile magnetrons) |
| EN 136002:1996 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification: CW magnetrons for RF heating or cooking applications |
| EN 13601:2002 |
Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| EN 13602:2002 |
Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors |
| EN 13603:2002 |
Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
| EN 13604:2002 |
Copper and copper alloys. Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |