| Standard No |
Title of Standard |
|
| EN 13605:2002 |
Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
| EN 13609-1:2005 |
Health informatics. Messages for maintenance of supporting information in healthcare systems. Updating of coding schemes |
| EN 1361:2004 |
Rubber hoses and hose assemblies for aviation fuel handling. Specification |
| EN 13610:2002 |
Chemical disinfectants. Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas. |
| EN 13611:2000 |
BSEN13611 : 2000 Safety and control devices for gas burners and gas-burning appliances - General requirements |
| EN 13612:2002 |
Performance evaluation of in vitro diagnostic medical devices |
| EN 13613:2001 |
Roller sports equipment. Skateboards. Safety requirements and test methods |
| EN 13614:2004 |
Methods of test for petroleum and its products. BS 2000-521: Bitumen and bituminous binders. Determination of adhesivity of bitumen emulsions by water immersion test. Aggregate method |
| EN 13615:2001 |
Methods for the analysis of ingot tin. Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry |
| EN 13616:2004 |
Overfill prevention devices for static tanks for liquid petroleum fuels |
| EN 13617-1:2004 |
Petrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| EN 13617-2:2004 |
Petrol filling stations. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| EN 13617-3:2004 |
Petrol filling stations. Safety requirements for constuction and performance of shear valves |
| EN 13617-4:2004 |
Petrol filling stations. Safety and environmental requirements for construction and performance of swivels for use on metering pumps and dispensers |
| EN 13619:2002 |
Postal services. Mail item processing. Optical characteristics for processing letters |
| EN 1362:1997 |
Identification card systems. Device interface characteristics. Classes of device interfaces |
| EN 13621:2004 |
Food processing machinery. Salad dryers. Safety and hygiene requirements |
| EN 13622:2002 |
Gas welding equipment. Terminology. Terms used for gas welding equipment |
| EN 13624:2003 |
Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area. |
| EN 13625:2002 |
Non-destructive testing. Leak test. Guide to the selection of instrumentation for the measurement of gas leakage |
| EN 13626:2003 |
Packaging. Box pallets. General requirements and test methods |
| EN 13627:2000 |
Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements |
| EN 13628-1:2002 |
Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography. Absolute methods |
| EN 13628-2:2002 |
Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography. Industrial methods |
| EN 13629:2002 |
Wood flooring. Solid pre-assembled hardwood board |
| EN 13630-1:2003 |
Explosives for civil uses. Detonating cords and safety fuses. Requirements |
| EN 13630-11:2002 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of velocity of detonation of detonating cords |
| EN 13630-12:2002 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of burning duration of safety fuses |
| EN 13630-2:2002 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of thermal stability of detonating cords and safety fuses |
| EN 13630-3:2002 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of sensitiveness to friction of the core of detonating cords |
| EN 13630-4:2002 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of sensitiveness to impact of detonating cords |
| EN 13630-5:2003 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of resistance to abrasion of detonating cords |
| EN 13630-6:2002 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of resistance to tension of detonating cords |
| EN 13630-7:2002 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of reliability of initiation of detonating cords |
| EN 13630-8:2002 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of resistance to water of detonating cords and safety fuses |
| EN 13630-9:2004 |
Explosives for civil uses. Detonating cords and safety fuses. Determination of transmission of detonation from detonating cord to detonating cord |
| EN 1363-1:1999 |
Fire resistance tests. General requirements |
| EN 13631-1:2005 |
Explosives for civil uses. High explosives. Requirements |
| EN 13631-10:2003 |
Explosives for civil uses. High explosives. Method for the verification of the means of initiation |
| EN 13631-11:2003 |
Explosives for civil uses. High explosives. Determination of transmission of detonation |
| EN 13631-12:2004 |
Explosives for civil uses. High explosives. Specifications of boosters with different initiating capability |
| EN 13631-13:2003 |
Explosives for civil uses. High explosives. Determination of density |
| EN 13631-14:2003 |
Explosives for civil uses. High explosives. Determination of velocity of detonation |
| EN 13631-15:2005 |
Explosives for civil uses. High explosives. Calculation of thermodynamic properties |
| EN 13631-16:2004 |
Explosives for civil uses. High explosives. Detection and measurement of toxic gases |
| EN 13631-2:2002 |
Explosives for civil uses. High explosives. Determination of thermal stability of explosives |
| EN 13631-3:2004 |
Explosives for civil uses. High explosives. Determination of sensitiveness to friction of explosives |
| EN 13631-4:2002 |
Explosives for civil uses. High explosives. Determination of sensitiveness to impact of explosives |
| EN 13631-5:2002 |
Explosives for civil uses. High explosives. Determination of resistance to water |
| EN 13631-6:2002 |
Explosives for civil uses. High explosives. Determination of resistance to hydrostatic pressure |
| EN 13631-7:2003 |
Explosives for civil uses. High explosives. Determination of safety and reliability at extreme temperatures |
| EN 1363-2:1999 |
Fire resistance tests. Alternative and additional procedures |
| EN 13632:2003 |
Methods of test for petroleum and its products. BS2000-518. Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen |
| EN 13634:2002 |
Protective footwear for professional motorcycle riders. Requirements and test methods |
| EN 13635:2001 |
Irrigation techniques. Localised irrigation systems. Terminology and data to be supplied by the manufacturer |
| EN 13636:2004 |
Cathodic protection of buried metallic tanks and related piping |
| EN 13639:2002 |
Determination of total organic carbon in limestone |
| EN 13640:2002 |
Stability testing of in vitro diagnostic reagents |
| EN 1364-1:1999 |
Fire resistance tests for non-loadbearing elements. Walls |
| EN 13641:2002 |
Elimination or reduction of risk of infection related to in vitro diagnostic reagents |
| EN 1364-2:1999 |
Fire resistance tests for non-loadbearing elements. Ceilings |
| EN 13645:2002 |
Installations and equipment for liquefied natural gas. Design of onshore installations with a storage capacity between 5 t and 200 t |
| EN 13647:2002 |
Wood and parquet flooring and wood panelling and cladding. Determination of geometrical characteristics |
| EN 13648-1:2002 |
Cryogenic vessels. Safety devices for protection against excessive pressure. Safety valves for cryogenic service |
| EN 13648-2:2002 |
Cryogenic vessels. Safety devices for protection against excessive pressure. Bursting disc safety devices for cryogenic service |
| EN 13648-3:2002 |
Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing |
| EN 13649:2002 |
Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Activated carbon and solvent desorption method |
| EN 13650:2001 |
Soil improvers and growing media. Extraction of aqua regia soluble elements |
| EN 1365-1:1999 |
Fire resistance tests for loadbearing elements. Walls |
| EN 13651:2001 |
Soil improvers and growing media. Extraction of calcium chloride/DTPA (CAT) soluble elements |
| EN 1365-2:2000 |
Fire resistance tests for loadbearing elements. Floors and roofs |
| EN 13652:2001 |
Soil improvers and growing media. Extraction of water soluble nutrients and elements |
| EN 1365-3:2000 |
Fire resistance tests for loadbearing elements. Beams |
| EN 13653:2004 |
Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of shear strength |
| EN 1365-4:1999 |
Fire resistance tests for loadbearing elements. Columns |
| EN 13654-1:2001 |
Soil improvers and growing media. Determination of nitrogen. Modified Kjeldahl method |
| EN 13654-2:2001 |
Soil improvers and growing media. Determination of nitrogen. Dumas method |
| EN 13655:2002 |
Plastics. Mulching thermoplastic films for use in agriculture and horticulture |
| EN 1365-5:2004 |
Fire resistance tests for loadbearing elements. Balconies and walkways |
| EN 13656:2002 |
Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO$d3), and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| EN 1365-6:2004 |
Fire resistance tests for loadbearing elements. Stairs |
| EN 13657:2002 |
Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN 13658-1:2005 |
Metal lath and beads. Definitions, requirements and test methods. Internal plastering |
| EN 13659:2004 |
Shutters. Performance requirements including safety |
| EN 1366-1:1999 |
Fire resistance tests for service installations. Fire resistance tests for service installations. Ducts |
| EN 1366-2:1999 |
Fire resistance tests for service installations. Fire dampers |
| EN 1366-3:2004 |
Fire resistance tests for service installations. Penetration seals |
| EN 1366-5:2003 |
Fire resistance tests for service installations. Service ducts and shafts |
| EN 1366-6:2004 |
Fire resistance tests for service installations. Raised access and hollow core floors |
| EN 1366-7:2004 |
Fire resistance tests for service installations. Conveyor systems and their closures |
| EN 1366-8:2004 |
Fire resistance tests for service installations. Smoke extraction ducts |
| EN 1367-1:2000 |
Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing |
| EN 1367-2:1998 |
Tests for thermal and weathering properties of aggregates. Magnesium sulfate test |
| EN 13672:2004 |
Surfaces for sports areas. Determination of resistance to abrasion of non-filled synthetic turf |
| EN 1367-3:2001 |
Tests for thermal and weathering properties of aggregates. Boiling test for Sonnenbrand basalt |
| EN 13673-1:2003 |
Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum explosion pressure |
| EN 1367-4:1998 |
Tests for thermal and weathering properties of aggregates. Determination of drying shrinkage |
| EN 13674-1:2003 |
Railway applications. Track. Rail. Vignole railway rails 46 kg/m and above |
| EN 1367-5:2002 |
Tests for thermal and weathering properties of aggregates. Determination of resistance to thermal shock |
| EN 13675:2004 |
Safety of machinery. Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 13676:2001 |
Polymer coated paper and board intended for food contact. Detection of pinholes |
| EN 13677-1:2003 |
Reinforced thermoplastic moulding compounds. Specification for GMT. Designation |
| EN 13677-2:2003 |
Reinforced thermoplastic moulding compounds. Specification for GMT. Methods of test and general requirements |
| EN 13677-3:2003 |
Reinforced thermoplastic moulding compounds. Specification for GMT. Specific requirements |
| EN 13683:2003 |
Garden equipment. Integrally powered shredders/chippers. Safety |
| EN 13684:2004 |
Garden equipment. Pedestrian controlled aerators and scarifiers. Safety |
| EN 13687-1:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Freeze-thaw cycling with de-icing salt immersion |
| EN 13687-2:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thunder-shower cycling (thermal shock) |
| EN 13687-3:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thermal cycling without de-icing salt impact |
| EN 13687-4:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Dry thermal cycling |
| EN 13687-5:2002 |
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Resistance to temperature shock |
| EN 13689:2002 |
Guidance on the classification and design of plastics piping systems used for renovation |
| EN 1369:1997 |
Founding. Magnetic particle inspection |
| EN 13693:2004 |
Precast concrete products. Special roof elements |
| EN 13697:2001 |
Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants |