| Standard No |
Title of Standard |
|
| EN 10246-13:2000 |
Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes |
| EN 10246-14:2000 |
Non-destructive testing of steel tubes. Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
| EN 10246-15:2000 |
Non-destructive testing of steel tubes. Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| EN 10246-16:2000 |
Non-destructive testing of steel tubes. Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
| EN 10246-17:2000 |
Non-destructive testing of steel tubes. Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections |
| EN 10246-18:2000 |
Non-destructive testing of steel tubes. Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections |
| EN 10246-2:2000 |
Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness |
| EN 10246-3:2000 |
Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 10246-4:2000 |
Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
| EN 10246-5:2000 |
Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded ferromagnetic steel tubes |
| EN 10246-6:2000 |
Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
| EN 10246-7:1996 |
Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless and welded steel tubes for the detection of longitudinal imperfections |
| EN 10246-8:2000 |
Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| EN 10246-9:2000 |
Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN 10248-1:1996 |
Hot rolled sheet piling of non alloy steels. Technical delivery conditions |
| EN 10248-2:1996 |
Hot rolled sheet piling of non alloy steels. Tolerances on shape and dimensions |
| EN 10249-1:1996 |
Cold formed sheet piling of non alloy steels. Technical delivery conditions |
| EN 10249-2:1996 |
Cold formed sheet piling of non alloy steels. Tolerances on shape and dimensions |
| EN 10250-1:1999 |
Open steel die forgings for general engineering purposes. General requirements |
| EN 10250-2:2000 |
Open steel die forgings for general engineering purposes. Non-alloy quality and special steels |
| EN 10250-3:2000 |
Open steel die forgings for general engineering purposes. Alloy special steels |
| EN 10250-4:2000 |
Open steel die forgings for general engineering purposes. Stainless steels |
| EN 10251:1997 |
Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| EN 10252:1997 |
Magnetic materials. Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies |
| EN 10253-1:1999 |
Butt-welding pipe fittings. Wrought carbon steel for general use and without specific inspection requirements |
| EN 10254:1999 |
Steel closed die forgings. General technical delivery conditions |
| EN 10255:2004 |
Non-alloy steel tubes suitable for welding or threading. Technical delivery conditions |
| EN 10256:2000 |
Non-destructive testing on steel tubes. Qualification and competence of level 1 and level 2 non-destructive testing personnel |
| EN 10257-1:1998 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Land cables |
| EN 10257-2:1998 |
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Submarine cables |
| EN 10258:1997 |
Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape |
| EN 10259:1997 |
Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape |
| EN 1026:2000 |
Windows and doors. Air permeability. Test method |
| EN 10263-1:2001 |
Steel rod, bars and wire for cold heading and cold extrusion. General technical delivery conditions |
| EN 10263-2:2001 |
Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels not intended for heat treatment after cold working |
| EN 10263-3:2001 |
Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for case hardening steels |
| EN 10263-4:2001 |
Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels for quenching and tempering |
| EN 10263-5:2001 |
Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels |
| EN 10264-1:2002 |
Steel wire and wire products. Steel wire for ropes. General requirements |
| EN 10264-2:2002 |
Steel wire and wire products. Steel wire for ropes. Cold drawn non alloy steel wire for ropes for general applications |
| EN 10264-3:2002 |
Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications |
| EN 10264-4:2002 |
Steel wire and wire products. Steel wire for ropes. Stainless steel wire |
| EN 10265:1996 |
Magnetic materials. Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| EN 10266:2003 |
Steel tubes, fittings and structural hollow sections. Symbols and definitions of terms for use in product standards |
| EN 10267:1998 |
Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| EN 10268:1999 |
Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming. General delivery conditions |
| EN 10269:1999 |
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 1027:2000 |
Windows and doors. Watertightness. Test method |
| EN 10270-1:2001 |
Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire |
| EN 10270-2:2001 |
Steel wire for mechanical springs. Oil hardened and tempered spring steel wire |
| EN 10270-3:2001 |
Steel wire for mechanical springs. Stainless spring steel wire |
| EN 10271:1999 |
Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions |
| EN 10272:2000 |
Stainless steel bars for pressure purposes |
| EN 10273:2000 |
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 10274:1999 |
Metallic materials. Drop weight tear test |
| EN 10275:1999 |
Metallic materials. Tube ring hydraulic pressure test |
| EN 10276-1:2000 |
Chemical analysis of ferrous materials. Determination of oxygen in steel and iron. Sampling and preparation of steel samples for oxygen determination |
| EN 10276-2:2003 |
Chemical analysis of ferrous materials. Determination of oxygen in steel and iron. Infrared method after fusion under inert gas |
| EN 10277-1:1999 |
Bright steel products. Technical delivery conditions. General |
| EN 10277-2:1999 |
Bright steel products. Technical delivery conditions. Steels for general engineering purposes |
| EN 10277-3:1999 |
Bright steel products. Technical delivery conditions. Free cutting steels |
| EN 10277-4:1999 |
Bright steel products. Technical delivery conditions. Case-hardening steels |
| EN 10277-5:1999 |
Bright steel products. Technical delivery conditions. Steels for quenching and tempering |
| EN 10278:1999 |
Dimensions and tolerances of bright steel products |
| EN 10279:2000 |
Hot rolled steel channels. Tolerances on shape, dimension and mass |
| EN 10280:2001 |
Magnetic materials. Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester |
| EN 1028-1:2002 |
Fire-fighting pumps. Fire-fighting centrifugal pumps with primer. Classification. General and safety requirements |
| EN 10282:2001 |
Magnetic materials. Method of test for the determination of surface insulation resistance of electrical sheet and strip |
| EN 1028-2:2002 |
Fire-fighting pumps. Fire-fighting centrifugal pumps with primer. Verification of general and safety requirements |
| EN 10283:1999 |
Corrosion resistant steel castings |
| EN 10284:2000 |
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
| EN 10288:2002 |
Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings |
| EN 10289:2002 |
Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings |
| EN 10290:2002 |
Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings |
| EN 10291:2000 |
Metallic materials. Uniaxial creep testing in tension. Methods of test |
| EN 10292:2000 |
Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming. Technical delivery conditions |
| EN 10293:2005 |
Steel castings for general engineering uses |
| EN 10295:2002 |
Heat resistant steel castings |
| EN 10296-1:2003 |
Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes |
| EN 10297-1:2003 |
Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions. Non-alloy and alloy steel tubes |
| EN 10301:2003 |
Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas |
| EN 10302:2002 |
Creep resisting steels, nickel and cobalt alloys |
| EN 10303:2001 |
Thin magnetic steel sheet and strip for use at medium frequencies |
| EN 10304:2001 |
Magnetic materials (iron and steel) for use in relays |
| EN 10305-1:2002 |
Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes |
| EN 10305-2:2002 |
Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes |
| EN 10305-3:2002 |
Steel tubes for precision applications. Technical delivery conditions. Welded cold sized tubes |
| EN 10305-4:2003 |
Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10305-5:2003 |
Steel tubes for precision applications. Technical delivery conditions. Welded and cold sized square and rectangular tubes |
| EN 10306:2002 |
Iron and steel. Ultrasonic testing of H beams with parallel flanges and IPE beams |
| EN 10307:2001 |
Non-destructive testing. Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| EN 10308:2002 |
Non-destructive testing. Ultrasonic testing of steel bars |
| EN 10310:2003 |
Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings |
| EN 10312:2002 |
Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions |
| EN 10314:2002 |
Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| EN 10318:2005 |
Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method |
| EN 10319-1:2003 |
Metallic materials. Tensile stress relaxation testing. Procedure for testing machines |
| EN 1032:2003 |
Mechanical vibration. Testing of mobile machinery in order to determine the vibration emission value |
| EN 10323:2004 |
Steel wire and products. Bead wire |
| EN 10324:2004 |
Steel wire and wire products. Hose reinforcement wire |
| EN 10326:2004 |
Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions |
| EN 10327:2004 |
Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions |
| EN 10328:2005 |
Iron and steel. Determination of the conventional depth and hardening after surface heating |
| EN 10330:2003 |
Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open circuit |
| EN 10331:2003 |
Magnetic materials. Specification for sintered soft magnetic materials |
| EN 10332:2003 |
Magnetic materials. Permanent magnet (magnetically hard) materials. Methods of measurement of magnetic properties |
| EN 10333:2005 |
Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Tin coated steel (tinplate) |
| EN 10334:2005 |
Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption. Non-coated steel (blackplate) |
| EN 10335:2005 |
Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. l |
| EN 1034-1:2000 |
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Common requirements |
| EN 10342:2005 |
Magnetic materials. Classification of surface insulations of electrical steel sheet, strip and laminations |
| EN 1034-3:2000 |
Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Winders and slitters, plying machines |
| EN 1035:1999 |
Tannery machines. Moving platen machinery. Safety requirements |
| EN 1036:1999 |
Glass in building. Mirrors from silver-coated float glass for internal use |
| EN 1037:1996 |
Safety of machinery. Prevention of unexpected start-up |