| Standard No |
Title of Standard |
|
| EN 1559-4:1999 |
Founding. Technical conditions of delivery. Additional requirements for aluminium alloy castings |
| EN 1559-5:1998 |
Founding. Technical conditions of delivery. Additional requirements for magnesium alloy castings |
| EN 1559-6:1999 |
Founding. Technical conditions of delivery. Additional requirements for zinc alloy castings |
| EN 1560:1997 |
Founding. Designation system for cast iron. Material symbols and material numbers |
| EN 1561:1997 |
Founding. Grey cast irons |
| EN 1562:1997 |
Founding. Malleable cast irons |
| EN 1563:1997 |
Founding. Spheroidal graphite cast iron |
| EN 1564:1997 |
Founding. Austempered ductile cast irons |
| EN 1565-1:2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). |
| EN 1566-1:2000 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). |
| EN 1567:2000 |
Building valves. Water pressure reducing valves and combination water reducing valves. Requirements and tests |
| EN 1568-1:2000 |
Fire extinguishing media. Foam concentrates. Specification for medium expansion foam concentrates for surface application to water-immiscible liquids |
| EN 1568-2:2000 |
Fire extinguishing media. Foam concentrates. Specification for high expansion foam concentrates for surface application to water-immiscible liquids |
| EN 1568-3:2000 |
Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-immiscible liquids |
| EN 1568-4:2000 |
Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-miscible liquids |
| EN 1569:1999 |
Surfaces for sports areas. Determination of the behaviour under a rolling load |
| EN 1570:1999 |
Safety requirements for lifting tables |
| EN 1573:1997 |
Bar coding. Multi industry transport label |
| EN 1590:1996 |
EDI. Message. Remittance advice message (REMADV) |
| EN 1591-1:2001 |
Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method |
| EN 1592-1:1998 |
Aluminium and aluminium alloys. HF seam welded tubes. Technical conditions for inspection and delivery |
| EN 1592-2:1998 |
Aluminium and aluminium alloys. HF seam welded tubes. Mechanical properties |
| EN 1592-3:1998 |
Aluminium and aluminium alloys. HF seam welded tubes. Tolerances on dimensions and form for circular tubes |
| EN 1592-4:1998 |
Aluminium and aluminium alloys. HF seam welded tubes. Tolerances on dimensions and form for square, rectangular and shaped tubes |
| EN 1593:1999 |
Non-destructive testing. Leak testing. Bubble emission techniques |
| EN 1594:2000 |
Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements |
| EN 1595:1997 |
Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing |
| EN 1596:1998 |
Specification for dedicated liquefied petroleum gas appliances. Mobile and portable non-domestic forced convection direct fired air heaters |
| EN 1597-1:1997 |
Welding consumables. Test methods. Test piece for all-weld metal test specimens in steel, nickel and nickel alloys |
| EN 1597-2:1997 |
Welding consumables. Test methods. Preparation of test piece for single-run and two-run technique test specimens in steel |
| EN 1597-3:1997 |
Welding consumables. Test methods. Testing of positional capability of welding consumables in a fillet weld |
| EN 1598:1998 |
Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes |
| EN 1599:1997 |
Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification |
| EN 1600:1997 |
Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification |
| EN 160000:1993 |
Harmonized system of quality assessment for electronic components. Generic specification: modular electronic units |
| EN 1601:1997 |
Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. |
| EN 160100:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification: capability approval of manufacturers of printed board assemblies of assessed quality |
| EN 160101:1998 |
Harmonized system of quality assessment for electronic components. Blank detail specification: printed board assembly modular electronic units of assessed quality. Capability approval |
| EN 1602:1997 |
Thermal insulating products for building applications. Determination of the apparent density |
| EN 160200-1:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification. Microwave modular electronic units of assessed quality. Capability approval procedure |
| EN 160200-2:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification. Microwave modular electronic units of assessed quality. Index of test methods |
| EN 160201:1998 |
Harmonized system of quality assessment for electronic components. Blank detail specification. Microwave modular electronic units of assessed quality. Capability approval |
| EN 1603:1997 |
Thermal insulating products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23$0DC/50% relative humidity) |
| EN 1604:1997 |
Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions |
| EN 1605:1997 |
Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions |
| EN 1606:1997 |
Thermal insulating products for building applications. Determination of compressive creep |
| EN 1607:1997 |
Thermal insulating products for building applications. Determination of tensile strength perpendicular to faces |
| EN 1608:1997 |
Thermal insulating products for building applications. Determination of tensile strength parallel to faces |
| EN 1609:1997 |
Thermal insulating products for building applications. Determination of short term water absorption by partial immersion |
| EN 161:2002 |
Automatic shut-off valves for gas burners and gas appliances |
| EN 1610:1998 |
Construction and testing of drains and sewers |
| EN 1611-1:2000 |
Sawn timber. Appearance grading of softwoods. European spruces, firs, pines and Douglas fir |
| EN 1612-1:1997 |
Rubber and plastics machines. Reaction moulding machines. Safety requirements for metering and mixing units |
| EN 1612-2:2000 |
Rubber and plastics machines. Reaction moulding machines. Safety requirements for reaction moulding plant |
| EN 1615:2000 |
Enteral feeding catheters and enteral giving sets for single use and their connectors. Design and testing |
| EN 1616:1997 |
Sterile urethral catheters for single use |
| EN 1617:1997 |
Sterile drainage catheters and accessory devices for single use |
| EN 1618:1997 |
Catheters other than intravascular catheters. Test methods for common properties |
| EN 1619:1997 |
Biotechnology. Large-scale process and production. General requirements for management and organization for strain conservation procedures |
| EN 1620:1997 |
Biotechnology. Large-scale process and production. Plant building according to the degree of hazard |
| EN 1621-1:1998 |
Motorcyclists' protective clothing against mechanical impact. Requirements and test methods for impact protectors |
| EN 1621-2:2003 |
Motorcyclists' protective clothing against mechanical impact. Motorcyclists back protectors. Requirements and test methods |
| EN 1622:1998 |
Water analysis. Determination of the threshold odour number (TON) and threshold flavour number (TFN) |
| EN 1624:1999 |
Textiles and textile products. Burning behaviour of industrial and technical textiles. Procedure to determine the flame spread of vertically oriented specimens |
| EN 1625:1999 |
Textiles and textile products. Burning behaviour of industrial and technical textiles. Procedure to determine the ignitability of vertically oriented specimens |
| EN 1626:1999 |
Cryogenic vessels. Valves for cryogenic service |
| EN 1634-1:2000 |
Fire resistance tests for door and shutter assemblies. Fire doors and shutters |
| EN 1634-3:2004 |
Fire resistance tests for door and shutter assemblies. Smoke control doors and shutters |
| EN 1636-3:2001 |
Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fittings |
| EN 1636-5:2001 |
Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fitness for purpose of the joints |
| EN 1637:1999 |
Light conveyor belts. Test methods for the measurement of the electrical resistances |
| EN 1638:1997 |
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure |
| EN 1639:2004 |
Dentistry. Medical devices for dentistry. Instruments |
| EN 1640:2004 |
Dentistry. Medical devices for dentistry. Equipment |
| EN 1641:2004 |
Dentistry. Medical devices for dentistry. Materials |
| EN 1642:2004 |
Dentistry. Medical devices for dentistry. Dental implants |
| EN 1643:2000 |
Valve proving systems for automatic shut-off valves for gas burners and gas appliances |
| EN 1644-1:1997 |
Test methods for nonwoven compresses for medical use. Nonwovens used in the manufacture of compresses |
| EN 1644-2:2000 |
Test methods for nonwoven compresses for medical use. Finished compresses |
| EN 1645-1:2004 |
Leisure accommodation vehicles. Caravans. Habitation requirements relating to health and safety |
| EN 1645-2:1999 |
Leisure accommodation vehicles. Caravans. User payloads |
| EN 1646-1:2004 |
Leisure accommodation vehicles. Motor caravans. Habitation requirements relating to health and safety |
| EN 1646-2:1998 |
Leisure accommodation vehicles. Motor caravans. User payloads |
| EN 1647:2004 |
Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety |
| EN 1648-1:2004 |
Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Caravans |
| EN 1648-2:2005 |
Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Motor caravans |
| EN 1649:2004 |
AIDC technologies. Operational aspects affecting the reading of bar code symbols |
| EN 165:1996 |
Personal eye-protection. Vocabulary |
| EN 1650:1998 |
Chemical disinfectants and antiseptics. |
| EN 165000-1:1996 |
Film and hybrid integrated circuits. Generic specification. Capability approval procedure |
| EN 165000-2:1996 |
Film and hybrid integrated circuits. Internal visual inspection and special tests |
| EN 165000-3:1996 |
Film and hybrid integrated circuits. Self-audit checklist and report for film and hybrid integrated circuit manufacturers |
| EN 165000-4:1996 |
Film and hybrid integrated circuits. Customer information, product assessment level schedules and blank detail specification |
| EN 165000-5:1998 |
Film and hybrid integrated circuits. Procedure for qualification approval |
| EN 1651:1999 |
Paragliding equipment. Harnesses. Safety requirements and strength tests |
| EN 1652:1998 |
Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| EN 1653:1998 |
Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| EN 1654:1998 |
Copper and copper alloys. Strip for springs and connectors |
| EN 1655:1997 |
Copper and copper alloys. Declarations of conformity |
| EN 1656:2000 |
Chemical disinfectants and antiseptics. |
| EN 1657:2000 |
Chemical disinfectants and antiseptics. |
| EN 1658:1997 |
Requirements for marking of in vitro diagnostic instruments |
| EN 1659:1997 |
In vitro diagnostic systems. Culture media for microbiology. Terms and definitions |
| EN 166:2002 |
Personal eye protection. Specifications |
| EN 1661:1998 |
Hexagon nuts with flange |
| EN 166100:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification:surface acoustic wave (SAW) filters |
| EN 166101:1999 |
Harmonized system of quality assessment for electronic components. Blank detail specification: surface acoustic wave (SAW) filters. Capability approval |
| EN 1662:1998 |
Hexagon bolts with flange. Small series |
| EN 1663:1998 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) |
| EN 1664:1998 |
Prevailing torque type all-metal hexagon nuts with flange |
| EN 1665:1997 |
Hexagon bolts with flange. Heavy series |
| EN 1666:1998 |
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread |
| EN 1667:1998 |
Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread |
| EN 1668:1997 |
Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels. Classification |
| EN 1669:1997 |
Aluminium and aluminium alloys. Test methods. Earing test for sheet and strip |