| Standard No |
Title of Standard |
|
| EN 1934:1998 |
Thermal performance of buildings. Determination of thermal resistance by hot box method using heat flow meter. Masonry |
| EN 1935:2002 |
Building hardware. Single-axis hinges. Requirements and test methods |
| EN 1936:1999 |
Natural stone test methods. Determination of real density and apparent density and of total and open porosity |
| EN 1937:1999 |
Test method for hydraulic setting floor smoothing and/or levelling compounds. Standard mixing procedures |
| EN 1938:1999 |
Personal eye protection. Goggles for motorcycle and moped users |
| EN 1939:2003 |
Self adhesive tapes. Determination of peel adhesion properties |
| EN 1940:1996 |
Self adhesive tapes. Measurement of breaking strength |
| EN 1941:1996 |
Self adhesive tapes. Measurement of elongation at break |
| EN 1942:2003 |
Self adhesive tapes. Measurement of thickness |
| EN 1943:2002 |
Self adhesive tapes. Measurement of static shear adhesion |
| EN 1944:1996 |
Self adhesive tapes. Measurement of unwind adhesion at low speed |
| EN 1945:1996 |
Self adhesive tapes. Measurement of quick stick |
| EN 1946-1:1999 |
Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Common criteria |
| EN 1946-2:1999 |
Thermal performance of building products and components. |
| EN 1946-3:1999 |
Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by heat flow meter method |
| EN 1946-4:2000 |
Measurements by hot box methods |
| EN 1946-5:2000 |
Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Measurements by pipe test methods |
| EN 1947:2002 |
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| EN 1948-1:1997 |
Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Sampling |
| EN 1948-2:1997 |
Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Extraction and clean-up |
| EN 1948-3:1997 |
Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Identification and quantification |
| EN 1949:2002 |
Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other road vehicles |
| EN 1953:1999 |
Atomizing and spraying equipment for coating materials. Safety requirements |
| EN 1957:2000 |
Domestic furniture. Beds and mattresses. Test methods for the determination of functional characteristics |
| EN 196000:1993 |
Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches |
| EN 196-1:2005 |
Methods of testing cement. Determination of strength |
| EN 196103:2000 |
Blank detail specification: Rotary switches. Assessment level Y |
| EN 196-2:2005 |
Methods of testing cement. Chemical analysis of cement |
| EN 1963:1998 |
Textile floor coverings. Tests using the Lisson Tretrad machine |
| EN 196-3:2005 |
Methods of testing cement. Determination of setting time and soundness |
| EN 196403:2000 |
Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y |
| EN 1964-1:2000 |
Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. |
| EN 1964-2:2001 |
Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. |
| EN 1964-3:2000 |
Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. |
| EN 196-5:2005 |
Methods of testing cement. Pozzolanicity test for pozzolanic cements |
| EN 196500:1993 |
Harmonized system of quality assessment for electronic components. Sectional specification. Membrane switches including blank detail specification EN 196501 |
| EN 1965-1:2001 |
Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate |
| EN 1965-2:2001 |
Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate |
| EN 196-6:1992 |
Methods of testing cement. Determination of fineness |
| EN 1966:2002 |
Structural adhesives. Characterisation of a surface by measuring adhesion by means of the three point bending method |
| EN 196-7:1992 |
Methods of testing cement. Methods of taking and preparing samples of cement |
| EN 1967:2002 |
Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| EN 1968:2002 |
Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders |
| EN 196-8:2003 |
Methods of testing cement. Heat of hydration. Solution method |
| EN 1969:2000 |
Surfaces for sports areas. Determination of thickness of synthetic sports surfaces |
| EN 196-9:2003 |
Methods of testing cement. Heat of hydration. Semi-adiabatic method |
| EN 1970:2000 |
Adjustable beds for disabled persons. Requirements and test methods |
| EN 1971:1999 |
Copper and copper alloys. Eddy current test for tubes |
| EN 197-1:2000 |
Cement. Composition, specifications and conformity criteria for low heat common cements |
| EN 1972:1997 |
Diving accessories. Snorkels. Safety requirements and test methods |
| EN 197-2:2000 |
Cement. Conformity evaluation |
| EN 1974:1998 |
Food processing machinery. Slicing machines. Safety and hygiene requirements |
| EN 197-4:2004 |
Cement. Composition, specifications and conformity criteria for low early strength blastfurnace cements |
| EN 1975:2000 |
Transportable gas cylinders. |
| EN 1976:1998 |
Copper and copper alloys. Cast unwrought copper products |
| EN 1977:1998 |
Copper and copper alloys. Copper drawing stock (wire rod) |
| EN 1978:1998 |
Copper and copper alloys. Copper cathodes |
| EN 1979:1999 |
Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam |
| EN 1981:2003 |
Copper and copper alloys. Master alloys |
| EN 1982:1999 |
Copper and copper alloys. Ingots and castings |
| EN 1984:2000 |
Industrial valves. Steel gate valves |
| EN 1985:1999 |
Walking aids. General requirements and test methods |
| EN 1986-1:1997 |
Electrically propelled road vehicles. Measurement of energy performances. Pure electric vehicles |
| EN 1986-2:2001 |
Electrically propelled road vehicles. Measurement of energy performances. Thermal electric hybrid vehicles |
| EN 1987-1:1997 |
Electrically propelled road vehicles. Specific requirements for safety. On board energy storage |
| EN 1987-2:1997 |
Electrically propelled road vehicles. Specific requirements for safety. Functional safety means and protection against failures |
| EN 1987-3:1998 |
Electrically propelled road vehicles. Specific requirements for safety. Protection of users against electrical hazards |
| EN 1988-1:1998 |
Foodstuffs. Determination of sulfite. Optimized Monier-Williams method |
| EN 1988-2:1998 |
Foodstuffs. Determination of sulfite. Enzymatic method |
| EN 1989:2000 |
Thermoplastics piping systems. Joints for buried non-pressure sewerage applications. |
| EN 1990:2002 |
Eurocode. Basis of structural design |
| EN 1990:2002 (Package) |
Eurocode. Basis of structural design. Compilation of BS EN 1990:2002 and the National Annex. |
| EN 1991-1-1:2002 |
Eurocode 1. Actions on structures. General actions. Densities, self-weight, imposed loads for buildings |
| EN 1991-1-2:2002 |
Eurocode 1. Actions on structures. General actions. Actions on structures exposed to fire |
| EN 1991-1-3:2003 |
Eurocode 1. Actions on structures. General actions. Snow loads |
| EN 1991-1-4:2005 |
Eurocode 1. Actions on structures. General actions. Wind actions |
| EN 1991-1-5:2003 |
Eurocode 1. Actions on structures. General actions. Thermal actions |
| EN 1991-2:2003 |
Eurocode 1. Actions on structures. Traffic loads on bridges |
| EN 1992-1-1:2004 |
Eurocode 2. Design of concrete structures. General rules and rules for buildings |
| EN 1992-1-2:2004 |
Eurocode 2. Design of concrete structures. General rules. Structural fire design |
| EN 1993-1-1:2005 |
Eurocode 3. Design of steel structures. General rules and rules for buildings |
| EN 1993-1-10:2005 |
Eurocode 3. Design of steel structures. Material toughness and through-thickness properties |
| EN 1993-1-2:2005 |
Eurocode 3. Design of steel structures. General rules. Structural fire design |
| EN 1993-1-8:2005 |
Eurocode 3. Design of steel structures. Design of joints |
| EN 1993-1-9:2005 |
Eurocode 3. Design of steel structures. Fatigue |
| EN 1994-1-1:2004 |
Eurocode 4. Design of composite steel and concrete structures |
| EN 1995-1-1:2004 |
Eurocode 5. Design of timber structures. General. Common rules and rules for buildings |
| EN 1995-1-2:2004 |
Eurocode 5. Design of timber structures. General. Structural fire design |
| EN 1995-2:2004 |
Eurocode 5. Design of timber structures. Bridges |
| EN 1996-1-2:2005 |
Eurocode 6. Design of masonry structures. General rules. Structural fire design |
| EN 1997-1:2004 |
Eurocode 7. Geotechnical design. General rules |
| EN 1998-1:2004 |
Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings |
| EN 1998-5:2004 |
Eurocode 8. Design of structures for earthquake resistance. Foundations, retaining structures and geotechnical aspects |
| EN 2:1992 |
Classification of fires |
| EN 200:1992 |
Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10. Minimum flow pressure of 0.05 MPa (0.5 bar) |
| EN 2000:1992 |
Quality assurance. EN aerospace products. Approval of the quality system of manufacturers |
| EN 2004-1:1993 |
Test methods for aluminium and aluminium alloy products. Determination of electrical conductivity of wrought aluminium alloys |
| EN 2004-5:1993 |
Test methods for aluminium and aluminium alloy products. Determination of cladding thickness and copper diffusion of clad semi-finished products |
| EN 2009:1992 |
Bearings. Airframe rolling rigid, single row ball bearings in steel diameter series 8 and 9. Dimensions and loads |
| EN 20-1:1992 |
Wood preservatives. Determination of the protective effectiveness against $7ILyctus brunneus$7R (Stephens). Application by surface treatment (laboratory method) |
| EN 201:1997 |
Rubber and plastics machines. Injection moulding machines. Safety requirements |
| EN 20105-A02:1994 |
Textiles. Tests for colour fastness. Grey scale for assessing change in colour (including half-steps) |
| EN 20105-A02:1995 |
Textiles. Tests for colour fastness. Grey scale for assessing change in colour |
| EN 20105-A03:1994 |
Textiles. Tests for colour fastness. Grey scale for assessing staining (including half-steps) |
| EN 20105-A03:1995 |
Textiles. Tests for colour fastness. Grey scale for assessing staining |
| EN 20105-C01:1992 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 1 |
| EN 20105-C02:1993 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 2 |
| EN 20105-C03:1993 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 3 |
| EN 20105-C04:1993 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 4 |
| EN 20105-C05:1993 |
Textiles. Tests for colour fastness. Colour fastness to washing: Test 5 |
| EN 20105-N01:1995 |
Textiles. Tests for colour fastness. Colour fastness to bleaching: hypochlorite |
| EN 2011:1989 |
Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 8 and 9. Dimensions and loads |
| EN 2012:1989 |
Specification for bearings - airframe rolling rigid, single row ball bearings in steel diameter series 0 and 2. Dimensions and loads |
| EN 2014:1989 |
Specification for bearings - airframe rolling rigid single row ball bearings in corrosion resisting steel diameter series 0 and 2. Dimensions and loads |
| EN 20140-10:1992 |
Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of airborne sound insulation of small building elements |