Standard No |
Title of Standard |
|
EN 20140-2:1993 |
Determination, verification and application of precision data |
EN 20140-9:1994 |
Acoustics. Measurement of sound insulation in buildings and of building elements. |
EN 2015:1989 |
Specification for bearings - airframe rolling double row, self aligning ball bearings in steel diameter series 2. Dimensions and loads |
EN 2017:1989 |
Specification for bearings - airframe rolling double row self aligning ball bearings in corrosion resisting steel diameter series 2. Dimensions and loads |
EN 2018:1989 |
Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads |
EN 20187:1993 |
Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
EN 20-2:1993 |
Wood preservatives. Determination of the protective effectiveness against $7ILyctus brunneus$7R (Stephens). Application by impregnation (laboratory method) |
EN 2020:1989 |
Specification for bearings - airframe rolling single row self aligning roller bearings in corrosion resisting steel diameter series 3 and 4. Dimensions and loads |
EN 2022:1990 |
Specification for bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Dimensions and loads |
EN 20225:1992 |
Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions |
EN 2023:1989 |
Specification for bearings - spherical plain in corrosion resisting steel with self-lubricating liner. Normal series. Dimensions and loads |
EN 20273:1992 |
Fasteners. Clearance holes for bolts and screws |
EN 20286-1:1993 |
ISO system of limits and fits. ISO system of limits and fits. Bases of tolerances, deviations and fits |
EN 20286-2:1993 |
ISO system of limits and fits. ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts |
EN 20287:1994 |
Paper and board. Determination of moisture content. Oven-drying method |
EN 203-1:1993 |
Specification for gas heated catering equipment. Safety requirements |
EN 203-2:1995 |
Specification for gas heated catering equipment. Rational use of energy |
EN 2032-1:2002 |
Metallic materials. Conventional designation |
EN 2032-2:1994 |
Metallic materials. Coding of metallurgical condition in delivery condition |
EN 204:2001 |
Classification of thermoplastic wood adhesives for non-structural applications |
EN 2044:2001 |
Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm $3L D $3L 63 mm. Dimensions |
EN 2045:2001 |
Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm $3L a $3L 50 mm. Dimensions |
EN 2046:2001 |
Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm $3L a $3L 50 mm. Dimensions |
EN 2047:2001 |
Aerospace series. Beaded L-section extruded, in aluminium and aluminium alloys. Dimensions |
EN 2048:2001 |
Aerospace series. Extruded L-section in aluminium alloys. Dimensions |
EN 2049:2001 |
Aerospace series. Extruded channel section, in aluminium alloys. Dimensions |
EN 205:2003 |
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
EN 2050:2001 |
Aerospace series. Extruded T-section, in aluminium alloys. Dimensions |
EN 20535:1994 |
Paper and board. Determination of water absorptiveness. Cobb method |
EN 20594-1:1994 |
Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment. General requirements |
EN 206-1:2000 |
Concrete. Specification, performance, production and conformity |
EN 2063:1992 |
Airframe rolling bearings. Technical specification |
EN 20638:1993 |
Method for determination of dry-matter content of pulps |
EN 2064:1992 |
Bearings, spherical plain in corrosion resisting steel with self lubricating liner. Technical specification |
EN 2066:2002 |
Aerospace series. Extruded section in aluminium alloys. General tolerances |
EN 2067:1996 |
Rod ends with self-aligning ball bearings. Technical specification |
EN 2068:1996 |
Rod ends with self-lubricating self-aligning bearings. Technical specification |
EN 20693:1992 |
Dimensions of seam welding wheel blanks |
EN 207:1999 |
Personal eye-protection. Filters and eye-protectors against laser radiation (laser eye-protectors) |
EN 2070-1:1991 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. General requirements |
EN 2070-2:1991 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Sheet, strip formed profiles and plate |
EN 2070-3:1991 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Bar and section |
EN 2070-4:1991 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube for structures |
EN 2070-5:1991 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube used under pressure |
EN 2070-6:1991 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Rivet wire |
EN 2070-7:1991 |
Specification for aluminium and aluminium alloy wrought products. Technical specification. Wrought forging stock |
EN 2071:2002 |
Aerospace series. Sheets in aluminium and aluminium alloys. Thickness 0,25 mm $3L a $3L 6 mm. Dimensions |
EN 2072:1994 |
Aluminium alloy AL-P1050A-H14. Sheet and strip 0,4 mm $3L a $3L 6 mm |
EN 2076-1:1991 |
Aluminium and magnesium alloy ingots and castings. Technical specification. General requirements |
EN 2076-2:1991 |
Aluminium and magnesium alloy ingots and castings. Technical specification. Ingots for remelting |
EN 2076-3:1991 |
Aluminium and magnesium alloy ingots and castings. Technical specification. Pre-production and production castings |
EN 2078:2002 |
Aerospace series. Metallic materials. Manufacturing schedule, inspection schedule, inspection and test report. Definition, general principles, preparation and approval |
EN 2079:1995 |
Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment. Dimensions and loads |
EN 208:1999 |
Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
EN 20811:1992 |
Textiles. Determination of resistance to water penetration. Hydrostatic pressure test |
EN 2082-1:1991 |
Specification for aluminium alloy forging stock and forgings. Technical specification. General requirements |
EN 2082-2:1991 |
Specification for aluminium alloy forging stock and forgings. Technical specification. Forging stock |
EN 2082-3:1991 |
Specification for aluminium alloy forging stock and forgings. Technical specification. Pre-production and production forgings |
EN 2083:2001 |
Aerospace series. Copper and copper alloy conductors for electrical cables. Product standard |
EN 2085:2004 |
Aerospace series. Aluminium alloy AL-P2618A-T6. Hand and die forgings. a $3L 150 mm |
EN 2086:2004 |
Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a $3L 150 mm |
EN 20865:1992 |
Slots in platens for projection welding machines |
EN 2089:1994 |
Aluminium alloy AL-P2014A-T6 or T62. Sheet and strip 0,4 mm $3L a $3L 6 mm |
EN 20898-2:1994 |
Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread |
EN 20898-7:1995 |
Mechanical properties of fasteners. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
EN 209:2000 |
Steel drums. Removable head (open head) drums with a minimum total capacity of 210 l |
EN 2092:1994 |
Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip 0,4 mm $3L a $3L 6 mm |
EN 2093:1992 |
Aluminium alloy AL-P7009-T74. Hand forgings 20 mm $3L a $3L 150 mm |
EN 2094:1992 |
Aluminium alloy AL-P7009-T74. Die forgings 3 mm $3L a $3L 150 mm |
EN 210:2000 |
Steel drums. Non-removable head (tight head) drums with a minimum total capacity of 216,5 l |
EN 2100:1992 |
Aluminium alloy AL-P2014A-T4511. Extruded bars and sections a or D $3L 200 mm |
EN 2101:1991 |
Specification for chromic acid anodizing of aluminium and wrought aluminium alloys |
EN 2103-1:1992 |
Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. General requirements |
EN 2103-2:1991 |
Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Remelting stock |
EN 2103-3:1992 |
Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Pre-production and production castings |
EN 2104:1996 |
Acrylonitrile-butadiene rubber (NBR). Hardness 40 IRHD |
EN 21089:1992 |
Electrode taper fits for spot welding equipment. Dimensions |
EN 212:2003 |
Wood preservatives. General guidance on sampling and preparation for analysis of wood preservatives and treated timber |
EN 2122:1996 |
Washers, flat, in aluminium alloy, anodized or chromated |
EN 2126:1992 |
Aluminium alloy AL-P7075-T651. Plate 6 mm $0L a $3L 80 mm |
EN 2127:1992 |
Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D $3L 100 mm |
EN 2128:1992 |
Aluminium alloy AL-P7075-T7351. Drawn bars 6 mm $3L a or D $3L 75 mm |
EN 2130:2001 |
Aerospace Series. Bearings, precision ball in corrosion resisting steel for instruments and equipment. Technical specification |
EN 2131:2002 |
Aerospace series. Plates in aluminium alloys. Thickness 6 mm $0L a $3L 160 mm. Dimensions |
EN 2133:1998 |
Cadmium plating of steels with specified tensile strength $3L 1450 MPa, copper, copper alloys and nickel alloys |
EN 2134:2002 |
Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm $3L D $3L 220 mm. Dimensions |
EN 2138:2000 |
Washers, flat, in steel, cadmium plated |
EN 2139:1990 |
Specification for washers, flat heat resisting steel |
EN 2143:1993 |
Rivets, solid, universal head, in aluminium 1050A, inch based series |
EN 2144:1993 |
Rivets, solid, universal head, in aluminium alloy 2117, inch based series |
EN 2145:1993 |
Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series |
EN 2146:1993 |
Rivets, solid, universal head, in aluminium alloy 2017A, inch based series |
EN 2148:1993 |
Rivets, solid, universal head, in aluminium alloy 5056A, inch based series |
EN 2149:1996 |
Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series |
EN 215:2004 |
Thermostatic radiator valves. Requirements and test methods |
EN 2155-12:1997 |
Specification for test methods for transparent materials for aircraft glazing. Determination of linear thermal expansion |
EN 2155-13:1993 |
Test methods for transparent materials for aircraft glazing. Determination of temperature at deflection under load |
EN 2155-14:1993 |
Test methods for transparent materials for aircraft glazing. Determination of the 1/10 Vicat softening temperature |
EN 2155-19:1997 |
Specification for test methods for transparent materials for aircraft glazing. Determination of craze resistance |
EN 2155-2:1993 |
Specification for test methods for transparent materials for aircraft glazing. Determination of water absorption |
EN 2155-21:1989 |
Specification for test methods for transparent materials for aircraft glazing. Determination of resistance to crack propagation (K factor) |
EN 2155-3:1993 |
Specification for test methods for transparent materials for aircraft glazing. Determination of refractive index |
EN 2155-5:1989 |
Specification for test methods for transparent materials for aircraft glazing. Determination of visible light transmission |
EN 2155-7:1997 |
Specification for test methods for transparent materials for aircraft glazing. Determination of optical deviation |
EN 2155-8:1989 |
Specification for test methods for transparent materials for aircraft glazing. Determination of optical distortion |
EN 2155-9:1989 |
Specification for test methods for transparent materials for aircraft glazing. Determination of haze |
EN 2157-1:1993 |
Steel. Forging stock and forgings. Technical specifications. General requirements |
EN 2157-2:1993 |
Steel. Forging stock and forgings. Technical specifications. Forging stock |
EN 2157-3:1993 |
Steel. Forging stock and forgings. Technical specifications. Pre-production and production forgings |
EN 21683:1994 |
Acoustics. Preferred reference quantities for acoustic levels |
EN 21864:1994 |
Information technology. Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange. 32 ftpmm (800 ftpi) NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm NRZ1 |
EN 21942-1:1992 |
Dental vocabulary. General and clinical terms |
EN 21942-2:1993 |
Dental vocabulary. Dental materials |
EN 21942-3:1994 |
Dental vocabulary. Dental instruments |
EN 21942-4:1994 |
Dental vocabulary. Dental equipment |