| Standard No |
Title of Standard |
|
| EN 29367-2:1995 |
Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships. General requirements. Semi-trailers |
| EN 2937:1994 |
Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification: 900 MPa (at ambient temperature)/650$0DC |
| EN 2938:1996 |
Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900 MPa (at ambient temperature)/650$0DC |
| EN 2939:1994 |
Screws, 100$0D countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650$0DC |
| EN 294:1992 |
Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs |
| EN 2940:1996 |
Screws, 100$0D countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900MPa (at ambient temperature) |
| EN 2942:1998 |
Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated |
| EN 2943:1998 |
Inserts, screw thread, helical coil, self-locking. Technical specification |
| EN 2944:1998 |
Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004 |
| EN 2945:1998 |
Inserts, screw thread, helical coil, self-locking. Assembly procedure |
| EN 29453:1994 |
Soft solder alloys. Chemical compositions and forms |
| EN 29454-1:1994 |
Soft soldering fluxes. Classification and requirements. Classification, labelling and packaging |
| EN 29455-1:1994 |
Soft soldering fluxes. Test methods. Determination of non-volatile matter, gravimetric method |
| EN 29455-11:1993 |
Soft soldering fluxes. Test methods. Solubility of flux residues |
| EN 29455-14:1993 |
Soft soldering fluxes. Test methods. Assessment of tackiness of flux residues |
| EN 29455-5:1993 |
Soft soldering fluxes. Test methods. Copper mirror test |
| EN 29455-8:1993 |
Soft soldering fluxes. Test methods. Determination of zinc content |
| EN 2948:1997 |
Washers, tab, in heat resisting steel, passivated |
| EN 2949:1997 |
Washers, wire locking, in corrosion resisting steel, passivated |
| EN 295-1:1991 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements |
| EN 29519:1994 |
Shipbuilding and marine structures. Rungs for dog-step ladders |
| EN 295-2:1991 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling |
| EN 295-3:1991 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test methods |
| EN 29539:1992 |
Specification for materials for equipment used in gas welding, cutting and allied processes |
| EN 295-4:1995 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for special fittings, adaptors and compatible accessories |
| EN 2955:1993 |
Recycling of titanium and titanium alloy scrap |
| EN 295-5:1994 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for perforated vitrified clay pipes and fittings |
| EN 295-6:1996 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay manholes |
| EN 295-7:1996 |
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay pipes and joints for pipe jacking |
| EN 297:1994 |
Gas-fired central heating boilers. Type B$d1$d1 and B$d1$d1$dB$dS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
| EN 29775:1993 |
Small craft. Remote steering systems for single outboard motors of 15 kW to 40 kW power |
| EN 298:1994 |
Automatic gas burner control systems for gas burners and gas burning appliances with or without fans |
| EN 298:2003 |
Automatic gas burner control systems for gas burners and gas burning appliances with or without fans |
| EN 2985:1996 |
Nickel-cadmium batteries of format A type |
| EN 2986:1996 |
Nickel-cadmium batteries of format B type |
| EN 29865:1993 |
Textiles. Determination of water repellency of fabrics by the Bundesmann rain-shower test |
| EN 2987:1996 |
Nickel-cadmium batteries of format C type |
| EN 2988:1996 |
Nickel-cadmium batteries of format D type |
| EN 29885:1994 |
Wide-mouth glass containers. Deviation from flatness of top sealing surface. Test methods |
| EN 299:1999 |
Oil pressure atomizing nozzles. Determination of the angle and spray characteristics |
| EN 2991:1996 |
Nickel-cadmium batteries of format E type |
| EN 2993:1996 |
Nickel-cadmium batteries of format F type |
| EN 2997-1:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak. |
| EN 2997-10:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak. |
| EN 2997-11:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak. |
| EN 2997-2:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak. |
| EN 2997-3:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak. |
| EN 2997-4:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak |
| EN 2997-5:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak |
| EN 2997-6:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak |
| EN 2997-7:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak |
| EN 2997-8:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak |
| EN 2997-9:1997 |
Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175$0DC continuous, 200$0DC continuous, 260$0DC peak |
| EN 2998:1996 |
Washers, flat, in heat resisting steel, passivated |
| EN 300:1997 |
Oriented strand boards (OSB). Definitions, classification and specifications |
| EN 3004:1997 |
Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650$0DC. Technical specification |
| EN 30042:1994 |
Arc-welded joints in aluminium and its weldable alloys. Guidance on quality levels for imperfections |
| EN 3005:2004 |
Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated. |
| EN 3006:1994 |
Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650$0DC |
| EN 3007:1996 |
Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), Silver plated. Classification: 900 MPa (at ambient temperature)/650$0DC |
| EN 3008:1998 |
Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650$0DC |
| EN 3009:1998 |
Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated. Classification. 1275 MPa (at ambient temperature)/650$0DC |
| EN 301:1992 |
Adhesives, phenolic and aminoplastic, for load-bearing timber structures: classification and performance requirements |
| EN 3010:1998 |
Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730$0DC |
| EN 3011:1998 |
Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification:1210 MPa (at ambient temperature)/730 $0DC |
| EN 30-1-1:1998 |
Domestic cooking appliances burning gas. Safety. General |
| EN 3012:1996 |
Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730$0DC |
| EN 30-1-2:1999 |
Domestic cooking appliances burning gas. Safety. Appliances having forced-convection ovens and/or grills |
| EN 3013:1996 |
Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated. Classification: 1210 MPa (at ambient temperature)/730$0DC |
| EN 30-1-3:2003 |
Domestic cooking appliances burning gas. Safety. Appliances having a glass ceramic hotplate |
| EN 30139-1:1994 |
Dentistry. Resilient lining materials for removable dentures. Specification for short-term materials |
| EN 3014:2001 |
Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa (at ambient temperature)/650$0DC |
| EN 30-1-4:2002 |
Domestic cooking appliances burning gas. Safety. Appliances having one or more burners with an automatic burner control system |
| EN 3015:2001 |
Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 1100 MPa (at ambient temperature)/650$0DC |
| EN 30-2-1:1998 |
Domestic cooking appliances burning gas. Rational use of energy. General |
| EN 302-1:2004 |
Adhesives for load bearing timber structures. Test methods. Determination of bond strength in longitudinal tensile shear strength |
| EN 30-2-2:1999 |
Domestic cooking appliances burning gas. Rational use of energy. Appliances having forced-convection ovens and/or grills |
| EN 302-2:2004 |
Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination |
| EN 302-3:2004 |
Adhesives for load-bearing timber structures. Test methods. Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| EN 302-4:2004 |
Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength |
| EN 3026:1994 |
Test method for dry film lubricants. Corrosion test on steel specimens |
| EN 302-6:2004 |
Adhesives for load-bearing timber structures. Test methods. Determination of the conventional pressing time. |
| EN 3027:1994 |
Test method for dry film lubricants. Salt spray test |
| EN 302-7:2004 |
Adhesives for load-bearing timber structures. Test methods. Determination of the conventional working life |
| EN 3030:1994 |
Test method for dry film lubricants. Solids content |
| EN 303-1:1999 |
Heating boilers. Heating boilers with forced draught burners. Terminology, general requirements, testing and marking |
| EN 3032:1994 |
Test method for dry film lubricants. Thickness measurement |
| EN 303-2:1999 |
Heating boilers. Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners |
| EN 30326-1:1994 |
Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements |
| EN 303-3:1999 |
Heating boilers. Gas-fired central heating boilers. Assembly comprising a boiler body and a forced draught burner |
| EN 303-4:1999 |
Heating boilers. Heating boilers with forced draught burners. Heating boilers with forced draught burners. |
| EN 3035:1997 |
Screws, 100$0D countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa |
| EN 303-5:1999 |
Heating boilers. Heating boilers with forced draught burners. Heating boilers for solid fuels, hand and automatically fired, nominal heat output of up to 300 kW. |
| EN 303-6:2000 |
Heating boilers. Heating boilers with forced draught burners. |
| EN 3037:1997 |
Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS$d2 lubricated. Classification: 1100 MPa |
| EN 3038:1997 |
Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 Mpa 425$0DC |
| EN 304:1992 |
Heating boilers. Test code for heating boilers for atomizing oil burners |
| EN 3044:1998 |
Installation holes for inserts, screw thread, helical coil, self-locking. Design standard |
| EN 3045:1994 |
Bearings, airframe rolling. Rigid single row ball bearings in steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads |
| EN 3046:1994 |
Bearings, airframe rolling. Rigid single row ball bearings in steel, cadmium plated. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads |
| EN 3047:1994 |
Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 0 and 2. Reduced clearance category. Dimensions and loads |
| EN 3048:2001 |
Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated load at ambient temperature. Dimensions and loads |
| EN 3049:1998 |
O-rings, in fluorocarbon rubber (FKM), low compression set. Hardness 80 IRHD |
| EN 305:1997 |
Heat exchangers. Definitions of performance of heat exchangers and the general test procedure for establishing performance of all heat exchangers |
| EN 3050:1998 |
O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification |
| EN 3052:1994 |
Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425$0DC |
| EN 3053:1994 |
Bearings, airframe rolling. Single row self-aligning roller bearings in steel. Dimensions and loads |
| EN 3054:1994 |
Bearings, airframe rolling. Single row self-aligning roller bearings in steel, cadmium plated. Dimensions and loads |
| EN 3055:1994 |
Bearings, airframe rolling. Single row self-aligning roller bearings in corrosion resisting steel. Dimensions and loads |
| EN 3056:1994 |
Bearings, airframe rolling. Rigid double row ball bearings in steel. Dimensions and loads |
| EN 3057:1994 |
Bearings, airframe rolling. Rigid double row ball bearings in steel, cadmium plated. Dimensions and loads |
| EN 3058:1994 |
Bearings, airframe rolling. Rigid double row ball bearings in corrosion resisting steel. Dimensions and loads |
| EN 306:1997 |
Heat exchangers. Methods of measuring the parameters necessary for establishing the performance |
| EN 3063:1994 |
Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature) |
| EN 3064:1996 |
Shank nuts, self-locking, serrated. Installation procedure |