| Standard No |
Title of Standard |
|
| EN 1111:1999 |
Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification |
| EN 111100:1992 |
Harmonized system of quality assessment for electronic components: sectional specification: display storage tubes |
| EN 111101:1996 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Display storage tubes |
| EN 1112:1997 |
Shower outlets for (PN 10) sanitary tapware |
| EN 1113:1997 |
Shower hoses for (PN 10) sanitary tapware |
| EN 1114-1:1997 |
Rubber and plastics machines. Extruders and extrusion lines. Safety requirements for extruders |
| EN 1114-2:1998 |
Rubber and plastics machines. Extruders and extrusion lines. Safety requirements for die face pelletizers |
| EN 1114-3:2001 |
Rubber and plastics machines. Extruders and extrusion lines. Safety requirements for haul-offs |
| EN 1115-1:2001 |
Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). General |
| EN 1116:2004 |
Kitchen furniture. Co-ordinating sizes for kitchen furniture and kitchen appliances |
| EN 1117:1999 |
Heat exchangers. Liquid-cooled refrigerant condensers. Test methods for establishing the performance |
| EN 1118:1999 |
Heat exchangers. Refrigerant cooled liquid coolers. Test methods for establishing the performance |
| EN 1119:1996 |
Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints |
| EN 1120:1996 |
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
| EN 112000:1997 |
Harmonized system of quality assessment for electronic components. Generic specification: image converter and image intensifier tubes |
| EN 112001:1997 |
Harmonized system of quality assessment for electronic components. Blank detail specification: image converter and image intensifier tubes |
| EN 1121:2000 |
Doors. Behaviour between two different climates. Test method |
| EN 1122:2001 |
Plastics. Determination of cadmium. Wet decomposition method |
| EN 1123-1:1999 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Requirements, testing, quality control |
| EN 1123-2:1999 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Dimensions |
| EN 1123-3:2004 |
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. |
| EN 1124-1:1999 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. Requirements, testing, quality control |
| EN 1124-2:1999 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System S. Dimensions |
| EN 1124-3:1999 |
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. System X; dimensions |
| EN 1125:1997 |
Building hardware. Panic exit devices operated by a horizontal bar. Requirements and test methods |
| EN 1127-1:1998 |
Explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology |
| EN 1127-2:2002 |
Explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology for mining |
| EN 1128:1996 |
Cement-bonded particleboards. Determination of hard body impact resistance |
| EN 1129-1:1995 |
Furniture. Foldaway beds. Safety requirements and testing. Safety requirements |
| EN 1129-2:1995 |
Furniture. Foldaway beds. Safety requirements and testing. Test methods |
| EN 113:1997 |
Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values |
| EN 113000:1993 |
Harmonized system of quality assessment for electronic components. Generic specification: camera tubes |
| EN 113001:1997 |
Harmonized system of quality assessment for electronic components. Blank detail specification: camera tubes |
| EN 1130-1:1997 |
Furniture. Cribs and cradles for domestic use. Safety requirements |
| EN 1130-2:1996 |
Furniture. Cribs and cradles for domestic use. Test methods |
| EN 1131:1995 |
Method for determination of the relative density of fruit and vegetable juices |
| EN 1132:1995 |
Method determination of the pH-value of fruit and vegetable juices |
| EN 1133:1995 |
Method for determination of formol number of fruit and vegetable juices |
| EN 1134:1994 |
Method for determination of sodium, potassium, calcium and magnesium contents of fruit and vegetable juices by atomic absorption spectrometry |
| EN 1135:1995 |
Fruit and vegetable juices. Method for determination of ash |
| EN 1136:1995 |
Method for determination of phosphorus content of fruit and vegetable juices: spectrometric method |
| EN 1137:1995 |
Method for determination of citric acid (citrate) content of fruit and vegetable juices: NADH spectrometric method |
| EN 1138:1995 |
Method for enzymatic determination of L-malic acid (L-malate) content of fruit and vegetable juices. NADH spectrometric method |
| EN 1139:1995 |
Method for determination of $dD-isocitric acid content of fruit and vegetable juices. NADPH spectrometric method |
| EN 1140:1995 |
Method for determination of $dD-glucose and $dD-fructose content of fruit and vegetable juices. NADPH spectrometric method |
| EN 114000:1993 |
Harmonized system of quality assessment for electronic components: generic specification: photomultiplier tubes |
| EN 114001:1997 |
Harmonized system of quality assessment for electronic components. Blank detail specification: photomultiplier tubes |
| EN 1141:1995 |
Method for determination of proline content in fruit and vegetable juices: spectrometric method |
| EN 1142:1995 |
Method for determination of sulfate content of fruit and vegetable juices |
| EN 1143-1:1997 |
Secure storage units. Requirements, classification and methods of test for resistance to burglary. Safes, strongroom doors and strongrooms |
| EN 1143-2:2001 |
Secure storage units. Requirements, classification and methods of test for resistance to burglary. Deposit systems |
| EN 1146:1997 |
Respiratory protective devices for self-rescue. Self-contained open-circuit compressed air breathing apparatus incorporating a hood |
| EN 1147:2001 |
Portable ladders for fire service use |
| EN 1148:1999 |
Heat exchangers. Water-to-water heat exchangers for district heating. Test procedures for establishing the performance data |
| EN 1149-1:1996 |
Protective clothing. Electrostatic properties. Surface resistivity (test methods and requirements) |
| EN 1149-2:1997 |
Protective clothing. Electrostatic properties. Test method for measurement of the electrical resistance through a material (vertical resistance) |
| EN 1149-3:2004 |
Protective clothing. Electrostatic properties. Test methods for measurement of charge decay |
| EN 115:1995 |
Safety rules for the construction and installation of escalators and passenger conveyors |
| EN 1150:1999 |
Protective clothing. Visibility clothing for non-professional use. Test methods and requirements |
| EN 1151:1999 |
Pumps. Rotodynamic pumps. Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations. Requirements, testing, marking |
| EN 1153:1996 |
Kitchen furniture. Safety requirements and test methods for built-in and free standing kitchen cabinets and work tops |
| EN 1154:1997 |
Building hardware. Controlled door closing devices. Requirements and test methods |
| EN 1155:1997 |
Building hardware. Electrically powered hold-open devices for swing doors. Requirements and test methods |
| EN 1158:1997 |
Building hardware. Door coordinator devices. Requirements and test methods |
| EN 1159-1:2003 |
Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal expansion |
| EN 1159-2:2003 |
Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of thermal diffusivity |
| EN 1159-3:2003 |
Advanced technical ceramics. Ceramic composites. Thermophysical properties. Determination of specific heat capacity |
| EN 116:1998 |
Diesel and domestic heating fuels. Determination of cold filter plugging point |
| EN 1160:1997 |
Installations and equipment for liquefied natural gas. General characteristics of liquefied natural gas |
| EN 116000-1:1996 |
Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. General |
| EN 116000-2:1994 |
Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. Generic data and methods of test for time delay relays |
| EN 116000-3:1996 |
Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. Test and measurement procedures |
| EN 1161:1997 |
Feather and down. Test methods. Determination of moisture content |
| EN 1162:1997 |
Feather and down. Test methods. Determination of the oxygen index number |
| EN 116200:1997 |
Harmonized system of quality assessment for electronic components. Sectional specification. Electromechanical all-or-nothing relays (including relays for severe environmental conditions) |
| EN 116203:1995 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing relays for enhanced industrial application |
| EN 116204:1995 |
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing sealed relays for aggressive industrial application |
| EN 116205 116206 116207 |
Harmonized system of quality assessment for electronic components. Blank detail specification. Hermetically sealed relays. For severe static environmental conditions (116205). |
| EN 1163:1997 |
Feather and down. Test methods. Determination of the oil and fat content |
| EN 116300:1994 |
Harmonized system of quality assessment for electronic components. Sectional specification: electromechanical all-or-nothing heavy load relays of assessed quality (rated from 5A and above) |
| EN 116303:1996 |
Harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical all-or-nothing heavy load relays of assessed quality |
| EN 1164:1999 |
Feather and down. Test methods. Determination of the turbidity of an aqueous extract |
| EN 1165:1997 |
Feather and down. Test methods. Determination of water-soluble chlorides |
| EN 1167:1996 |
Feather and down. Method of test for measuring the sizes of quilts filled with feather and/or down |
| EN 1169:1999 |
Precast concrete products. General rules for factory production control of glass-fibre reinforced cement |
| EN 117:2005 |
Wood preservatives. Determination of toxic values against Reticulitermes species (European termites) (laboratory method) |
| EN 117000:1997 |
Harmonized system of quality assessment for electronic components. Generic specification. Solid state all-or-nothing relays. Generic data and methods of test |
| EN 1170-1:1998 |
Precast concrete products. Test method for glass-fibre reinforced cement. Measuring the consistency of the matrix. 'Slump test' method |
| EN 1170-2:1998 |
Precast concrete products. Test method for glass-fibre reinforced cement. Measuring the fibre content in fresh GRC, 'Wash out test' |
| EN 1170-3:1998 |
Precast concrete products. Test method for glass-fibre reinforced cement. Measuring the fibre content of sprayed GRC |
| EN 1170-4:1998 |
Precast concrete products. Test method for glass-fibre reinforced cement. Measuring bending strength. 'Simplified bending test' method |
| EN 1170-5:1998 |
Precast concrete products. Test method for glass-fibre reinforced cement. Measuring bending strength, "complete bending test" method |
| EN 1170-6:1998 |
Precast concrete products. Test method for glass-fibre reinforced cement. Determination of the absorption of water by immersion and determination of the dry density |
| EN 1170-7:1998 |
Precast concrete products. Test method for glass-fibre reinforced cement. Measurement of extremes of dimensional variations due to moisture content |
| EN 1171:2002 |
Industrial valves. Cast iron gate valves |
| EN 1172:1997 |
Copper and copper alloys. Sheet and strip for building purposes |
| EN 1173:1996 |
Copper and copper alloys. Material condition or temper designation |
| EN 1174-1:1996 |
Sterilization of medical devices. Estimation of the population of micro-organisms on product. Requirements |
| EN 1174-2:1997 |
Sterilization of medical devices. Estimation of the population of micro-organisms on product. Guidance |
| EN 1174-3:1997 |
Sterilization of medical devices. Estimation of the population of micro-organisms on product. Guide to the methods for validation of microbiological techniques |
| EN 1175-1:1998 |
Safety of industrial trucks. Electrical requirements. General requirements for battery powered trucks |
| EN 1175-2:1998 |
Safety of industrial trucks. Electrical requirements. General requirements for internal combustion engine powered trucks |
| EN 1175-3:1998 |
Safety of industrial trucks. Electrical requirements. Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| EN 1176-1:1998 |
Playground equipment. General safety requirements and test methods |
| EN 1176-2:1998 |
Playground equipment. Additional specific safety requirements and test methods for swings |
| EN 1176-3:1998 |
Playground equipment. Additional specific safety requirements and test methods for slides |
| EN 1176-4:1998 |
Playground equipment. Additional specific safety requirements and test methods for runways |
| EN 1176-5:1999 |
Playground equipment. Additional specific safety requirements and test methods for carousels |
| EN 1176-6:1998 |
Playground equipment. Additional specific safety requirements and test methods for rocking equipment |
| EN 1176-7:1997 |
Playground equipment. Guidance on installation, inspection, maintenance and operation |
| EN 1177:1998 |
Impact absorbing playground surfacing. Safety requirements and test methods |
| EN 1179:2003 |
Zinc and zinc alloys. Primary zinc |
| EN 118:2005 |
Wood preservatives. Determination of preventive action against Reticulitermes species (European termites) (laboratory method) |
| EN 1183:1997 |
Materials and articles in contact with foodstuffs. Test methods for thermal shock and thermal shock endurance |
| EN 1184:1997 |
Materials and articles in contact with foodstuffs. Test methods for translucency of ceramic articles |