| Standard No |
Title of Standard |
|
| EN 480-13:2002 |
Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures |
| EN 480-2:1997 |
Admixtures for concrete, mortar and grout. Test methods. Determination of setting time |
| EN 480-4:1997 |
Admixtures for concrete, mortar and grout. Test methods. Determination of bleeding of concrete |
| EN 480-5:1997 |
Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption |
| EN 480-6:1997 |
Admixtures for concrete, mortar and grout. Test methods. Infrared analysis |
| EN 480-8:1997 |
Admixtures for concrete, mortar and grout. Test methods. Determination of the conventional dry material content |
| EN 481:1993 |
Workplace atmospheres. Size fraction definitions for measurement of airborne particles |
| EN 482:1994 |
Workplace atmospheres. General requirements for the performance of procedures for the measurement of chemical agents |
| EN 483:2000 |
Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW |
| EN 484:1998 |
Specification for dedicated liquefied petroleum gas appliances. Independent hotplates, including those incorporating a grill for outdoor use |
| EN 485-1:1994 |
Aluminium and aluminium alloys. Sheet, strip and plate. Technical conditions for inspection and delivery |
| EN 485-2:2004 |
Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties |
| EN 485-3:2003 |
Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on dimensions and form for hot-rolled products |
| EN 485-4:1994 |
Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on shape and dimensions for cold-rolled products |
| EN 486:1994 |
Aluminium and aluminium alloys. Extrusion ingots. Specifications |
| EN 487:1994 |
Aluminium and aluminium alloys. Rolling ingots. Specifications |
| EN 488:2003 |
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. |
| EN 489:2003 |
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. |
| EN 490:2004 |
Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications |
| EN 491:2004 |
Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods |
| EN 49-1:2005 |
Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by surface treatment (laboratory method) |
| EN 492:2004 |
Fibre-cement slates and fittings. Product specification and test methods |
| EN 49-2:2005 |
Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by impregnation (laboratory method) |
| EN 494:2004 |
Fibre-cement profiled sheets and fittings. Product specification and test methods |
| EN 495-5:2001 |
Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing |
| EN 497:1998 |
Specification for dedicated liquefied petroleum gas appliances. Multi-purpose boiling burners for outdoor use |
| EN 498:1998 |
Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use |
| EN 499:1995 |
Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification |
| EN 500-1:1996 |
Mobile road construction machinery. Safety. Common requirements |
| EN 50014:1998 |
Electrical apparatus for potentially explosive atmospheres. General requirements |
| EN 50015:1994 |
Electrical apparatus for potentially explosive atmospheres. Oil immersion 'o' |
| EN 50015:1998 |
Electrical apparatus for potentially explosive atmospheres. Oil immersion "o" |
| EN 50016:2002 |
Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus "p" |
| EN 50017:1994 |
Electrical apparatus for potentially explosive atmospheres. Powder filling 'q' |
| EN 50017:1998 |
Electrical apparatus for potentially explosive atmospheres. Powder filling "q" |
| EN 50018:2000 |
Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure 'd' |
| EN 50019:2000 |
Electrical apparatus for potentially explosive atmospheres. Increased safety 'e' |
| EN 500-2:1996 |
Mobile road construction machinery. Safety. Specific requirements for road-milling machines |
| EN 50020:1995 |
Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i' |
| EN 50020:2002 |
Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i' |
| EN 50021:1999 |
Electrical apparatus for potentially explosive atmospheres. Type of protection "n" |
| EN 500-3:1996 |
Mobile road construction machinery. Safety. Specific requirements for soil stabilization machines |
| EN 50033:1991 |
Specification for construction and testing of miners' caplamps in relation to the risk of explosion, for mines susceptible to firedamp |
| EN 500-4:1996 |
Mobile road construction machinery. Safety. Specific requirements for compaction machines |
| EN 50049-1:1998 |
Domestic and similar electronic equipment interconnection requirements. Peritelevision connector |
| EN 50050:2001 |
Electrical apparatus for potentially explosive atmospheres. Electrostatic hand-held spraying equipment |
| EN 50059:1991 |
Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
| EN 50062:1992 |
Specification for ceramic pressurized hollow insulators for high-voltage switchgear and controlgear |
| EN 50065-1:2001 |
Specification for signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. General requirements, frequency bands and electromagnetic disturbances |
| EN 50065-2-1:2003 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz |
| EN 50065-2-2:2003 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz |
| EN 50065-2-3:2003 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz |
| EN 50065-4-1:2002 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Generic specification |
| EN 50065-4-2:2002 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Safety requirements |
| EN 50065-4-3:2003 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Incoming filter |
| EN 50065-4-4:2003 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Impedance filter |
| EN 50065-4-5:2003 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Low voltage decoupling filters. Segmentation filter |
| EN 50065-4-6:2004 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Low voltage decoupling filters. Phase coulper |
| EN 50065-7:2001 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Equipment impedance |
| EN 50066:1993 |
Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
| EN 50068:1991 |
Specification for wrought steel enclosures for gas-filled high-voltage switchgear and controlgear |
| EN 50069:1991 |
Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear |
| EN 50072:1992 |
Medical electrical equipment. Particular requirements for safety. Specification for peritoneal dialysis equipment |
| EN 50073:1999 |
Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen |
| EN 50075:1991 |
Specification for flat non-wirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes |
| EN 50077:1993 |
Specification for low profile connectors (IS-1) for implantable pacemakers |
| EN 50080:1991 |
Specification for RF characteristics of MAC AM-VSB cable receivers |
| EN 50083-1:1994 |
Cabled distribution systems for television and sound signals. Safety requirements |
| EN 50083-10:2002 |
Cabled distribution systems for television and sound signals. System performance for return paths |
| EN 50083-2:2001 |
Cabled distribution systems for television and sound signals. Electromagnetic compatibility for equipment |
| EN 50083-3:2002 |
Cabled distribution systems for television and sound signals. Active wideband equipment for coaxial cable networks |
| EN 50083-4:1999 |
Cabled distribution systems for television and sound signals. Passive wideband equipment for coaxial cable networks |
| EN 50083-5:2002 |
Cabled distribution systems for television and sound signals. Headend equipment |
| EN 50083-7:1997 |
Cabled distribution systems for television and sound signals. System performance |
| EN 50083-8:2002 |
Cabled distribution systems for television and sound signals. Electromagnetic compatibility for networks |
| EN 50083-9:2002 |
Cabled distribution systems for television and sound signals. Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
| EN 50085-1:1999 |
Cable trunking and cable ducting systems for electrical installations. General requirements |
| EN 50085-2-3:2001 |
Cable trunking and cable ducting systems for electrical installations. Particular requirements for slotted cable trunking systems intended for installation in cabinets |
| EN 50086-1:1994 |
Specification for conduit systems for cable management. General requirements |
| EN 50086-2-1:1996 |
Specification for conduit systems for cable management. Particular requirements. Rigid conduit systems |
| EN 50086-2-2:1996 |
Specification for conduit systems for cable management. Particular requirements. Pliable conduit systems |
| EN 50086-2-3:1996 |
Specification for conduit systems for cable management. Particular requirements. Flexible conduit systems |
| EN 50086-2-4:1994 |
Specification for conduit systems for cable management. Particular requirements. Conduit systems buried underground |
| EN 50087:1993 |
Safety of household and similar electrical appliances. Particular requirements for bulk-milk coolers |
| EN 50088:1996 |
Safety of electric toys |
| EN 50089:1992 |
Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear |
| EN 50090-2-1:1996 |
Home and Building Electronic Systems (HBES). System overview. Architecture |
| EN 50090-2-2:1997 |
Home and Building Electronic Systems (HBES). System overview. General technical requirements |
| EN 50090-2-3:2005 |
Home and building electronic systems (HBES). System overview. General functional safety requirements for products intended to be integrated in HBES |
| EN 50090-3-1:1996 |
Home and Building Electronic Systems (HBES). Aspects of application. Introduction to the application structure |
| EN 50090-3-2:2004 |
Home and Building Electronic Systems (HBES). Aspects of application |
| EN 50090-4-1:2004 |
Home and Building Electronic Systems (HBES). Media independent layers |
| EN 50090-4-2:2004 |
Home and Building Electronic Systems (HBES). Media independent layers |
| EN 50090-5-1:2005 |
Home and Building Electronic Systems (HBES). Media and media dependent layers. Power line for HBES Class 1 |
| EN 50090-5-2:2004 |
Home and Building Electronic Systems (HBES). Media and media dependent layers |
| EN 50090-7-1:2004 |
Home and Building Electronic Systems (HBES). System management |
| EN 50090-8:2001 |
Home and Building Electronic Systems (HBES). Conformity assessment of products |
| EN 50090-9-1:2004 |
Home and building electronic systems (HBES). Installation requirements |
| EN 50091-1-1:1997 |
Uninterruptible power systems (UPS). General and safety requirements for UPS used in operator access areas |
| EN 50091-1-2:1999 |
Specification for uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations |
| EN 50091-2:1996 |
Specification for uninterruptible power systems (UPS). EMC requirements |
| EN 50094:1993 |
Access control system for the MAC/packet family: EUROCRYPT |
| EN 50098-1:1999 |
Customer premises cabling for information technology. ISDN basic access |
| EN 50098-2:1996 |
Customer premises cabling for information technology. 2048 kbit/s ISDN primary access and leased line network interface |
| EN 501:1994 |
Roofing products from metal sheet. Specifications for fully supported roofing products of zinc sheet |
| EN 50103:1996 |
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for the active (including active implantable) medical device industry |
| EN 50104:2002 |
Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods |
| EN 50106:1997 |
Specification for safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of BS EN 60335-1 and BS EN 60967 |
| EN 50107-1:2002 |
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV. General requirements |
| EN 50107-2:2005 |
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV. |
| EN 50109-1:1996 |
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. General requirements and tests |
| EN 50109-2-1:1996 |
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. |
| EN 50109-2-2:1996 |
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. |
| EN 50109-2-3:1996 |
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. |
| EN 50109-2-4:1996 |
Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements. |