| Standard No |
Title of Standard |
|
| EN 60068-2-40:2000 |
Environmental testing. Test methods. Test Z/AM. Combined cold/low air pressure tests |
| EN 60068-2-41:2000 |
Environmental testing. Test methods. Tests. Test Z/BM: Combined dry heat/low air pressure tests |
| EN 60068-2-42:2003 |
Environmental testing. Test methods. Test Kc. Sulphur dioxide test for contacts and connections |
| EN 60068-2-43:2003 |
Environmental testing. Test methods. Test Kd. Hydrogen sulphide test for contacts and connections |
| EN 60068-2-44:1995 |
Environmental testing. Test methods. Tests. Guidance on Test T. Soldering |
| EN 60068-2-45:1993 |
Environmental testing. Test methods. Environmental testing. Tests. Test XA and guidance. Immersion in cleaning solvents |
| EN 60068-2-47:2000 |
Environmental testing. Test methods. Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests |
| EN 60068-2-48:2000 |
Environmental testing. Test methods. Guidance on the application of the tests of IEC 60068 to simulate the effects of storage |
| EN 60068-2-5:2000 |
Environmental testing. Test methods. Test Sa: Simulated solar radiation at ground level |
| EN 60068-2-50:2000 |
Environmental testing. Test methods. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens |
| EN 60068-2-51:2000 |
Environmental testing. Test methods. Tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| EN 60068-2-52:1996 |
Environmental testing. Test methods. Tests. Test Kb. Salt mist cyclic (sodium chloride solution) |
| EN 60068-2-55:1993 |
Environmental testing. Test methods. Environmental testing procedures. Tests. Test Ee and guidance. Bounce |
| EN 60068-2-57:2000 |
Environmental testing. Test methods. Test Ff. Vibration. Time-history method |
| EN 60068-2-58:2004 |
Environmental testing. Tests. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| EN 60068-2-59:1993 |
Environmental testing. Test methods. Test Fe and guidance. Vibration (sine-beat method) |
| EN 60068-2-6:1996 |
Environmental testing. Test methods. Test Fc. Vibration (sinusoidal) |
| EN 60068-2-60:1996 |
Environmental testing. Test methods. Test Ke. Flowing mixed gas corrosion test |
| EN 60068-2-61:1994 |
Environmental testing. Test methods. Test Z/ABDM. Climatic sequence |
| EN 60068-2-64:1995 |
Environmental testing. Test methods. Test Fh. Vibration, broad-band random (digital control) and guidance |
| EN 60068-2-65:1995 |
Environmental testing. Test methods. Test Fg. Vibration, acoustically induced |
| EN 60068-2-66:1995 |
Environmental testing. Test methods. Test Cx. Damp heat, steady state (unsaturated pressurized vapour) |
| EN 60068-2-67:1996 |
Environmental testing. Test methods. Test Cy. Damp heat, steady state, accelerated test primarily intended for components |
| EN 60068-2-68:1996 |
Environmental testing. Test methods. Test L. Dust and sand |
| EN 60068-2-69:1996 |
Environmental testing. Test methods. Tests. Test Te. Solderability testing of electronic components for surface mount technology by the wetting balance method |
| EN 60068-2-7:1993 |
Environmental testing. Test methods. Test Ga and guidance. Acceleration, steady state |
| EN 60068-2-70:1996 |
Environmental testing. Test methods. Test Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands |
| EN 60068-2-74:2000 |
Environmental testing. Test methods. Test Xc: Fluid contamination |
| EN 60068-2-75:1997 |
Environmental testing. Test methods. Test Eh. Hammer tests |
| EN 60068-2-77:1999 |
Environmental testing. Test methods. Body strength and impact shock |
| EN 60068-2-78:2002 |
Environmental testing. Test methods. Test Cab. Damp heat, steady state |
| EN 60068-2-81:2003 |
Environmental testing. Test methods. Test Ei. Shock. Shock response spectrum synthesis |
| EN 60068-2-9:2000 |
Environmental testing. Test methods. Tests. Guidance for solar radiation testing |
| EN 60068-3-1:1999 |
Environmental testing. Guidance. Cold and dry heat tests |
| EN 60068-3-2:1999 |
Environmental testing. Guidance. Combined temperature/low air pressure tests |
| EN 60068-3-3:1993 |
Environmental testing. Guidance. Environmental testing. Miscellaneous. Guide to seismic test methods for equipment |
| EN 60068-3-4:2002 |
Environmental testing. Guidance. Damp heat tests |
| EN 60068-3-5:2002 |
Environmental testing. Guidance. Confirmation of the performance of temperature chambers |
| EN 60068-3-6:2002 |
Environmental testing. Guidance. Confirmation of the performance of temperature/humidity chambers |
| EN 60068-3-7:2002 |
Environmental testing. Guidance. Measurements in temperature chambers for tests A and B (with load) |
| EN 60068-3-8:2003 |
Environmental testing. Supporting documentation and guidance |
| EN 60068-4:1996 |
Environmental testing. Information for specification writers. Test summaries |
| EN 60068-5-2:2000 |
Environmental testing. Guide to drafting of test methods. Terms and definitions |
| EN 60071-1:1996 |
Insulation co-ordination. Definitions, principles and rules |
| EN 60071-2:1997 |
Insulation co-ordination. Application guide |
| EN 60073:2002 |
Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators |
| EN 60076-1:1997 |
Power transformers. General |
| EN 60076-10:2001 |
Power transformers. Determination of sound levels |
| EN 60076-2:1997 |
Power transformers. Temperature rise |
| EN 60076-3:2001 |
Power transformers. Insulation levels, dielectric tests and external clearances in air |
| EN 60076-4:2002 |
Power transformers. Guide to the lightning impulse and switching impulse testing. Power transformers and reactors |
| EN 60076-5:2001 |
Power transformers. Ability to withstand short circuit |
| EN 60077-1:2002 |
Railway applications. Electric equipment for rolling stock. General service conditions and general rules |
| EN 60077-2:2002 |
Railway applications. Electric equipment for rolling stock. Electrotechnical components. General rules |
| EN 60077-3:2002 |
Railway applications. Electric equipment for rolling stock. Electrotechnical components. Rules for d.c. circuit-breakers |
| EN 60077-4:2003 |
Railway applications. Electric equipment for rolling stock. Electrotechnical components. Rules for AC circuit-breakers |
| EN 60077-5:2003 |
Railway applications. Electrotechnical equipment for rolling stock. Electrotechnical components. Rules for HV fuses |
| EN 60079-0:2004 |
Electrical apparatus for explosive gas atmospheres. General requirements |
| EN 60079-1:2004 |
Electrical apparatus for explosive gas atmospheres. Flameproof enclosures 'd' |
| EN 60079-10:2003 |
Electrical apparatus for explosive gas atmospheres. Classification of hazardous areas |
| EN 60079-14:2003 |
Electrical apparatus for explosive gas atmospheres. Electrical installations in hazardous areas (other than mines) |
| EN 60079-15:2003 |
Electrical apparatus for explosive gas atmospheres. Type of protection "n" |
| EN 60079-17:2003 |
Electrical apparatus for explosive gas atmospheres. Inspection and maintenance of electrical installations in hazardous areas (other than mines) |
| EN 60079-18:2004 |
Electrical apparatus for explosive gas atmospheres. Construction, test and marking of type of protection encapsulation "m" electrical apparatus |
| EN 60079-2:2004 |
Electrical apparatus for explosive gas atmospheres. Pressurized enclosures "p" |
| EN 60079-25:2004 |
Electrical apparatus for explosive gas atmospheres. Intrinsically safe systems |
| EN 60079-26:2004 |
Electrical appartus for explosive gas atmospheres. Construction, test and marking of group II category I G electrical apparatus |
| EN 60079-7:2003 |
Electrical apparatus for explosive gas atmospheres. Increased safety "e" |
| EN 60081:1998 |
Double-capped fluorescent lamps. Performance specifications |
| EN 60085:2004 |
Electrical insulation. Thermal classification |
| EN 60086-1:2001 |
Primary batteries. General |
| EN 60086-2:2001 |
Primary batteries. Physical and electrical specifications |
| EN 60086-3:1996 |
Primary batteries. Watch batteries |
| EN 60086-4:2000 |
Primary batteries. Safety standard for lithium batteries |
| EN 60086-5:2001 |
Primary batteries. Safety of batteries with aqueous electrolyte |
| EN 60092-507:2000 |
Electrical installations in ships. Pleasure craft |
| EN 60094-1:1994 |
Magnetic tape sound recording and reproducing systems. Specification for general conditions and requirements |
| EN 60094-2:1996 |
Magnetic tape sound recording and reproducing systems. Calibration tapes |
| EN 60094-3:1997 |
Magnetic tape sound recording and reproducing systems. Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape |
| EN 60094-4:1994 |
Magnetic tape sound recording and reproducing systems. Mechanical magnetic tape properties |
| EN 60094-5:1994 |
Magnetic tape sound recording and reproducing systems. Specification for electrical magnetic tape properties |
| EN 60094-7:1994 |
Magnetic tape sound recording and reproducing systems. Specification for cassettes for commercial tape records and domestic use |
| EN 60095-2:1993 |
Lead-acid starter batteries. Dimensions of batteries and dimensions and marking of terminals |
| EN 60095-4:1993 |
Lead-acid starter batteries. Dimensions of batteries for heavy commercial vehicles |
| EN 60097:1993 |
Specification for grid systems for printed circuits |
| EN 60099-1:1994 |
Surge arresters. Non-linear resistor type gapped surge arrestors for a.c. systems |
| EN 60099-4:2004 |
Surge arresters. Metal-oxide surge arresters without gaps for a.c. systems |
| EN 60099-5:1997 |
Surge arresters. Selection and application recommendations |
| EN 601:2004 |
Aluminum and aluminium alloys. Castings. Chemical composition of castings for use in contact with foodstuff |
| EN 60107-1:1997 |
Methods of measurement on receivers for television broadcast transmission. General considerations. Measurements on displays at radio and video frequencies |
| EN 60107-2:1997 |
Methods of measurement on receivers for television broadcast transmission. Audio channels. General methods and methods for monophonic channels |
| EN 60107-5:1999 |
Methods of measurement on receivers for television broadcast transmission. Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound |
| EN 60107-7:1997 |
Methods of measurement on receivers for television broadcast transmission. HDTV displays |
| EN 60107-8:1997 |
Methods of measurement on receivers for television broadcast transmission. Measurements on D2-MAC/packet equipment |
| EN 60110-1:1998 |
Power capacitors for induction heating installations. General |
| EN 60112:2003 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| EN 60115-1:2001 |
Fixed resistors for use in electronic equipment. Generic specification |
| EN 60115-9:2004 |
Fixed resistors for use in electronic equipment. Sectional specification. Fixed surface mount resistor networks with individually measurable resistors |
| EN 60115-9-1:2004 |
Fixed resistors for use in electronic equipment. Blank detail specification. Fixed surface mount resistor networks with individually measurable resistors |
| EN 60118-0:1993 |
Hearing aids. Methods for measurement of electroacoustical characteristics |
| EN 60118-1:1995 |
Hearing aids. Hearing aids with induction pick-up coil input |
| EN 60118-12:1997 |
Hearing aids. Dimensions of electrical connector systems |
| EN 60118-13:1998 |
Hearing aids. Electromagnetic compatibility (EMC). Product standard |
| EN 60118-14:1998 |
Hearing aids. Specification of a digital interface device |
| EN 60118-2:1996 |
Hearing aids. Methods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits |
| EN 60118-4:1998 |
Hearing aids. Magnetic field strength in audio-frequency induction loops for hearing aid purposes |
| EN 60118-6:1999 |
Hearing aids. Characteristics of electrical input circuits for hearing aids |
| EN 60118-6:1999 Edition 2 |
Hearing aids. Characteristics of electrical input circuits for hearing aids |
| EN 60118-7:1993 |
Hearing aids. Methods for measurement of the performance characteristics of hearing aids for quality inspection on delivery |
| EN 60122-1:2002 |
Quartz crystal units of assessed quality. Generic specification |
| EN 60122-3:2001 |
Quartz crystal units of assessed quality. Standard outlines and lead connections |
| EN 60127-1:1991 |
Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuse-links |
| EN 60127-10:2002 |
Miniature fuses. User guide for miniature fuses |
| EN 60127-2:2003 |
Miniature fuses. Cartridge fuse-links |
| EN 60127-3:1996 |
Miniature fuses. Specification for sub-miniature fuse-links |