| Standard No |
Title of Standard |
|
| EN 60127-4:1998 |
Miniature fuses. Universal modular fuse-links (UMF) |
| EN 60127-5:1991 |
Miniature fuses. Guide for the quality assessment of miniature fuse-links |
| EN 60127-6:1994 |
Miniature fuses. Fuse-holders for miniature cartridge fuse-links |
| EN 60130-17:1999 |
Connectors for frequencies below 3 MHz. Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| EN 60130-9:2001 |
Connectors for frequencies below 3 MHz. Circular connectors for radio and associated sound equipment |
| EN 60133:2001 |
Dimensions of pot-cores made of magnetic oxides and associated parts |
| EN 60137:1996 |
Insulated bushings for alternating voltages above 1 kV |
| EN 60137:2003 |
Insulated bushings for alternating voltages above 1000 V |
| EN 60139:2001 |
Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges |
| EN 60143-1:1993 |
Series capacitors for power systems. General. Performance, testing and rating. Safety requirements. Guide for installation |
| EN 60143-2:1995 |
Series capacitors for power systems. Protective equipment for series capacitor banks |
| EN 60143-3:1998 |
Series capacitors for power systems. Internal fuses |
| EN 60146-1-1:1993 |
Semiconductor convertors. General requirements and line commutated convertors. Specifications of basic requirements |
| EN 60146-1-3:1993 |
Semiconductor convertors. General requirements and line commutated convertors. Transformers and reactors |
| EN 60146-2:2000 |
Semiconductor convertors. General requirements and line commutated convertors. Self-commutated semiconductor converters including direct d.c. converters |
| EN 60154-1:1996 |
Flanges for waveguides. General requirements |
| EN 60154-2:1997 |
Flanges for waveguides. Relevant specifications for flanges for ordinary rectangular waveguides |
| EN 60155:1995 |
Glow-starters for fluorescent lamps |
| EN 60156:1996 |
Insulating liquids. Determination of the breakdown voltage at power frequency. Test method |
| EN 60168:1995 |
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V |
| EN 60169-21:1997 |
Radio-frequency connectors. Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. |
| EN 60169-23:1994 |
Radio-frequency connectors. Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) |
| EN 60169-24:1994 |
Radio-frequency connectors. Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) |
| EN 60169-25:1994 |
Radio-frequency connectors. Two-pole screw ($9L-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor |
| EN 60172:1996 |
Test procedure for the determination of the temperature index of enamelled winding wires |
| EN 60182-2:1991 |
Basic dimensions of winding wires. Specification for maximum overall diameters of enamelled round winding wires |
| EN 60188:2001 |
High-pressure mercury vapour lamps. Performance specifications |
| EN 60191-3:2000 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of integrated circuits |
| EN 60191-4:2000 |
Mechanical standardization of semiconductor devices. Coding system and classification into forms of package outlines for semiconductor device packages |
| EN 60191-6:2004 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-1:2001 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-10:2003 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-12:2002 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-2:2002 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-3:2001 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-4:2003 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-5:2001 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-6:2001 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60191-6-8:2001 |
Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| EN 60192:2001 |
Low pressure sodium vapour lamps. Performance specification |
| EN 602:2004 |
Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff |
| EN 60204-1:1993 |
Safety of machinery. Electrical equipment of machines. Specification for general requirements |
| EN 60204-1:1998 |
Safety of machinery. Electrical equipment of machines. General requirements |
| EN 60204-11:2001 |
Safety of machinery. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV |
| EN 60204-31:1998 |
Safety of machinery. Electrical equipment of machines. Particular safety and EMC requirements for sewing machines, units and systems |
| EN 60204-32:1998 |
Safety of machinery. Electrical equipment of machines. Requirements for hoisting machines |
| EN 60205:2001 |
Calculation of the effective parameters of magnetic piece parts |
| EN 60214:1998 |
On-load tap-changers |
| EN 60214-1:2003 |
Tap-changers. Performance requirements and test methods |
| EN 60215:1996 |
Safety requirements for radio transmitting equipment |
| EN 60216-1:2002 |
Guide for the determination of thermal endurance properties of electrical insulating materials. Ageing procedures and evaluation of test results |
| EN 60216-3:2002 |
Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics |
| EN 60216-4-2:2001 |
Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. |
| EN 60216-4-3:2000 |
Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Ageing ovens. Multi-chamber ovens |
| EN 60216-5:2003 |
Electrical insulating materials. Thermal endurance properties. Determination of relative thermal endurance index (RTE) of an insulating material |
| EN 60216-6:2004 |
Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| EN 60228:2005 |
Conductors of insulated cables |
| EN 60230:2002 |
Impulse tests on cables and their accessories |
| EN 60238:1999 |
Edison screw lampholders |
| EN 60238:2004 |
Edison screw lampholders |
| EN 60239:1997 |
Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces |
| EN 60240-1:1994 |
Characteristics of electric infra-red emitters for industrial heating. Short wave infra-red emitters |
| EN 60243-1:1998 |
Methods of test for electric strength of solid insulating materials. Tests at power frequencies |
| EN 60243-2:2001 |
Methods of test for electric strength of solid insulating materials. Additional requirements for tests using direct voltage |
| EN 60243-3:2002 |
Methods of test for electric strength of solid insulating materials. Additional requirements for 1,2/50 $Gms impulse tests |
| EN 60244-1:2000 |
Methods of measurement for radio transmitters. General characteristics for broadcast transmitters |
| EN 60244-10:1993 |
Methods of measurement for radio transmitters. Methods of measurement for television transmitters and transposers employing insertion test signals |
| EN 60244-11:1993 |
Methods of measurement for radio transmitters. Transposers for FM sound broadcasting |
| EN 60244-12-1:1994 |
Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting. |
| EN 60244-12-2:1994 |
Methods of measurement for radio transmitters. Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting. Specification sheets |
| EN 60244-13:1993 |
Methods of measurement for radio transmitters. Performance characteristics for FM sound broadcasting |
| EN 60244-14:1997 |
Methods of measurement for radio transmitters. External intermodulation products caused by two or more transmitters using the same or adjacent antennas |
| EN 60244-15:2000 |
Methods of measurement for radio transmitters. Amplitude-modulated transmitters for sound broadcasting |
| EN 60244-5:1995 |
Methods of measurement for radio transmitters. Performance characteristics of television transmitters |
| EN 60244-8:1995 |
Methods of measurement for radio transmitters. Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers |
| EN 60244-9:1995 |
Methods of measurement for radio transmitters. Performance characteristics for television transposers |
| EN 60247:2004 |
Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan $Gd) and d.c. resistivity |
| EN 60249-1:1993 |
Base materials for printed circuits. Base materials for printed circuits. Test methods |
| EN 60249-2-1:1994 |
Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality |
| EN 60249-2-10:1994 |
Specifications. Epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test) |
| EN 60249-2-11:1994 |
Specifications. Specification for thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards |
| EN 60249-2-12:1994 |
Specifications. Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards |
| EN 60249-2-13:1994 |
Base material for printed circuits. Specifications. Flexible copper-clad polyimide film, general purpose grade |
| EN 60249-2-14:1994 |
Specifications. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality |
| EN 60249-2-15:1994 |
Specifications. Flexible copper-clad polyimide film, of defined flammability |
| EN 60249-2-16:1993 |
Specifications. Specification No. 16. Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) |
| EN 60249-2-17:1993 |
Specifications. Specification No. 17. Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| EN 60249-2-18:1993 |
Specifications. Specification No. 18. Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) |
| EN 60249-2-19:1993 |
Specifications. Specification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability |
| EN 60249-2-2:1994 |
Specifications. Specification for phenolic cellulose paper copper-clad laminated sheet, economic quality |
| EN 60249-2-3:1994 |
Specifications. Metal-clad base materials for printed wiring boards. Copper-clad base material. Specification for epoxide cellulose paper copper-clad laminated sheet of defined flammability |
| EN 60249-2-4:1994 |
Specifications. Specification for epoxide woven glass fabric copper-clad laminated sheet, general purpose grade |
| EN 60249-2-5:1994 |
Specifications. Specification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) |
| EN 60249-2-6:1994 |
Specifications. Specification No.6. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test) |
| EN 60249-2-7:1994 |
Specifications. Specification No.7. Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) |
| EN 60249-2-8:1995 |
Specifications. Specification for flexible copper-clad polyester (PETP) film |
| EN 60249-2-9:1994 |
Specifications. Epoxide cellulose paper core, epoxide glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test) |
| EN 60252-1:2001 |
A.C. motor capacitors. General. Performance, testing and rating. Safety requirements. Guide for installation and operation |
| EN 60252-2:2003 |
A.C. motor capacitors. Motor start capacitors |
| EN 60254-1:1997 |
Lead-acid traction batteries. General requirements and methods of test |
| EN 60254-2:1997 |
Lead-acid traction batteries. Dimensions of cells and terminals and marking of polarity on cells |
| EN 60255-21-1:1996 |
Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibration tests (sinusoidal) |
| EN 60255-21-2:1996 |
Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Shock and bump tests |
| EN 60255-21-3:1995 |
Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Seismic tests |
| EN 60255-22-2:1997 |
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Electrostatic discharge tests |
| EN 60255-22-3:2001 |
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Radiated electromagnetic field disturbance tests |
| EN 60255-22-4:2002 |
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Electrical fast transient/burst immunity test |
| EN 60255-22-5:2002 |
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Surge immunity test |
| EN 60255-22-6:2001 |
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Immunity to conducted disturbances induced by radio frequency fields |
| EN 60255-22-7:2003 |
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Power frequency immunity tests |
| EN 60255-23:1997 |
Electrical relays. Contact performance |
| EN 60255-24:2001 |
Electrical relays. Common format for transient data exchange (COMTRADE) for power systems |
| EN 60255-25:2000 |
Electrical relays. Electromagnetic emission tests for measuring relays and protection equipment |
| EN 60255-26:2005 |
Electrical relays. Electromagnetic compatibility requirements for measuring relays and protection equipment |
| EN 60255-3:1998 |
Electrical relays. Single input energizing quantity measuring relays with dependent or independent time |