| Standard No |
Title of Standard |
|
| EN 60495:1994 |
Single sideband power-line carrier terminals |
| EN 60503:1998 |
Spools for broadcast videotape recorders (VTRS) |
| EN 60505:2004 |
Evaluation and qualification of electrical insulation systems |
| EN 60507:1993 |
Artificial pollution tests on high-voltage insulators to be used on a.c. systems |
| EN 60510-2-5:1996 |
Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency modulators |
| EN 60510-2-6:1996 |
Methods of measurement for radio equipment used in satellite earth stations. Measurements for sub-systems. Frequency demodulators |
| EN 60510-3-4:1996 |
Methods of measurement for radio equipment used in satellite earth stations. Methods of measurement on combinations of sub-systems. |
| EN 60512-1:2001 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General |
| EN 60512-10-4:2003 |
Connectors for electronic equipment. Tests and measurements. Test 10d. Electrical overload (connectors) |
| EN 60512-1-1:2002 |
Connectors for electronic equipment. Tests and measurements. General. Test 1a. Visual examination |
| EN 60512-1-100:2001 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General. General. Applicable publications |
| EN 60512-11-1:1999 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11a. Climatic sequence |
| EN 60512-11-10:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11j. Cold |
| EN 60512-11-11:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11k. Low air pressure |
| EN 60512-11-12:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11m. Damp heat, cyclic |
| EN 60512-11-13:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11n. Gas tightness, solderless wrapped connections |
| EN 60512-11-14:2003 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Flowing single gas corrosion test |
| EN 60512-11-2:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11b. Combined/sequential cold, low air pressure and damp heat |
| EN 60512-11-3:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11c. Damp heat, steady state |
| EN 60512-11-4:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11d. Rapid change of temperature |
| EN 60512-11-5:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11e. Mould growth |
| EN 60512-11-6:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11f. Corrosion, salt mist |
| EN 60512-11-7:2003 |
Connectors for electronic equipment. Tests and measurements. Flowing mixed gas corrosion test |
| EN 60512-11-8:1999 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Climatic tests. Test 11h. Sand and dust |
| EN 60512-11-9:2002 |
Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11i. Dry heat |
| EN 60512-1-2:2002 |
Connectors for electronic equipment. Tests and measurements. General. Test 1b. Examination of dimension and mass |
| EN 60512-12-6:1997 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests. Test 12f. |
| EN 60512-12-7:2001 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Soldering tests. Test 12g. Solderability, wetting balance method |
| EN 60512-1-3:1997 |
Connectors for electronic equipment. Tests and measurements. General. Test 1c. Electrical engagement length |
| EN 60512-13-1:1997 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical operating tests. Test 13a. Engaging and separating forces |
| EN 60512-1-4:1997 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General. Test 1d. Contact protection effectiveness (scoop-proof) |
| EN 60512-14-7:1998 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests. Test 14g. Impacting water |
| EN 60512-15-8:1997 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 15h. |
| EN 60512-16-20:1997 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 16t. |
| EN 60512-19-3:1998 |
Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Fluid resistance |
| EN 60512-20-2:2001 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Test 20b. Flammability tests. Fireproofness |
| EN 60512-2-1:2002 |
Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2a. Contact resistance. Millivolt level method |
| EN 60512-2-2:2003 |
Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2b. Contact resistance. Specified test current method |
| EN 60512-2-3:2002 |
Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2c. Contact resistance variation |
| EN 60512-23-3:2001 |
Connectors for electronic equipment. Tests and measurements. Test 23c. Shielding effectiveness of connectors and accessories |
| EN 60512-23-4:2001 |
Screening and filtering tests. Test 23d: Transmission line reflections in the time domain |
| EN 60512-23-7:2005 |
Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23g. Effective transfer impedance of connectors |
| EN 60512-2-5:2003 |
Connectors for electronic equipment. Tests and measurements. Test 2e. Contact disturbance |
| EN 60512-25-1:2001 |
Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio |
| EN 60512-25-2:2002 |
Connectors for electronic equipment. Tests and measurements. Test 25b. Attenuation (insertion loss) |
| EN 60512-25-3:2001 |
Connectors for electronic equipment. Test and measurements. Test 25c. Rise time degradation |
| EN 60512-25-4:2001 |
Connectors for electronic equipment. Test and measurements. Test 25d. Propagation delay |
| EN 60512-25-5:2004 |
Connectors for electronic equipment. Tests and measurements. Test 25e. Return loss |
| EN 60512-25-6:2004 |
Connectors for electronic equipment. Tests and measurements. Test 25f. Eye pattern and jitter |
| EN 60512-25-7:2005 |
Connectors for electronic equipment. Tests and measurements. Test 25g. Impedance, reflection coefficient and voltage standing wave ratio (VSWR) |
| EN 60512-2-6:2002 |
Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2f. Housing (shell) electrical continuity |
| EN 60512-3-1:2002 |
Connectors for electronic equipment. Tests and measurements. Insulation tests. Test 3a. Insulation resistance |
| EN 60512-4-1:2003 |
Connectors for electronic equipment. Tests and measurements. Voltage stress tests. est 4a. Voltage proof |
| EN 60512-4-2:2002 |
Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4b. Partial discharge |
| EN 60512-4-3:2002 |
Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4c. Voltage proof of pre-insulated crimp barrels |
| EN 60512-5-1:2002 |
Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5a. Temperature rise |
| EN 60512-5-2:2002 |
Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5b. Current-temperature derating |
| EN 60512-6-1:2002 |
Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6a. Acceleration, steady state |
| EN 60512-6-2:2002 |
Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6b. Bump |
| EN 60512-6-3:2002 |
Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6c. Shock |
| EN 60512-6-4:2002 |
Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6d. Vibration (sinusoidal) |
| EN 60512-6-5:2001 |
Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Dynamic stress tests. Test 6e. Random vibration |
| EN 60514:1995 |
Acceptance inspection of class 2 alternating-current watthour meters |
| EN 60517:1997 |
Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| EN 60519-1:2003 |
Safety in electroheat installations. General requirements |
| EN 60519-11:1997 |
Safety in electroheat installations. Particular requirements for installations for electromagnetic stirring, transport or pouring of metal liquids |
| EN 60519-2:1994 |
Safety in electroheat installations. Particular requirements for resistance heating equipment |
| EN 60519-21:1998 |
Safety in electroheat installations. Particular requirements for resistance heating equipment. Heating and melting glass equipment |
| EN 60519-3:1996 |
Safety in electroheat installations. Particular requirements for induction and conduction heating and induction melting installations |
| EN 60519-4:1997 |
Safety in electroheat installations. Particular requirements for arc furnace installations |
| EN 60519-6:2002 |
Safety in electroheat installations. Specifications for safety in industrial microwave heating equipment |
| EN 60519-9:1996 |
Safety in electroheat installations. Particular requirements for high-frequency dielectric heating installations |
| EN 60521:1995 |
Class 0.5, 1 and 2 alternating-current watthour meters |
| EN 60522:1999 |
Determination of the permanent filtration of X-ray tube assemblies |
| EN 60523:1993 |
Direct-current potentiometers |
| EN 60524:1993 |
Direct-current resistive volt ratio boxes |
| EN 60526:2004 |
High-voltage cable plug and socket connections for medical X-ray equipment |
| EN 60529:1992 |
Specification for degrees of protection provided by enclosures (IP code) |
| EN 60531:2000 |
Household electric thermal storage room heaters. Methods for measuring performance |
| EN 60534-1:2005 |
Industrial-process control valves. Control valve terminology and general considerations |
| EN 60534-2-1:1999 |
Industrial-process control valves. Flow capacity. Flow capacity. Sizing equations for fluid flow under installed conditions |
| EN 60534-2-3:1998 |
Industrial-process control valves. Flow capacity. Test procedures |
| EN 60534-2-5:2003 |
Industrial-process control valves. Flow capacity. Sizing equations for fluid flow through multistage control valves with interstage recovery |
| EN 60534-3-1:2000 |
Industrial-process control valves. Dimensions. Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions |
| EN 60534-3-2:2001 |
Industrial-process control valves. Dimensions. Face-to-face dimensions for rotary control valves except butterfly valves |
| EN 60534-3-3:1998 |
Industrial-process control valves. Dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| EN 60534-5:2004 |
Industrial-process control valves. Marking |
| EN 60534-6-1:1998 |
Industrial-process control valves. Mounting details for attachment of positioners to control valves. Positioner mounting on linear actuators |
| EN 60534-6-2:2001 |
Industrial-process control valves. Mounting details for attachment of positioners to control valves. Positioner mounting on rotary actuators |
| EN 60534-8-1:2001 |
Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves |
| EN 60534-8-2:1993 |
Industrial-process control valves. Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| EN 60534-8-3:2000 |
Industrial-process control valves. Noise considerations. Control valve aerodynamic noise prediction method |
| EN 60534-8-4:1994 |
Industrial-process control valves. Noise considerations. Prediction of noise generated by hydrodynamic flow |
| EN 60539-1:2002 |
Directly heated negative temperature coefficient thermistors. Generic specification |
| EN 60539-2:2004 |
Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coefficient thermistors |
| EN 60544-1:1995 |
Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry |
| EN 60544-4:2003 |
Electrical insulating materials. Determination of the effects of ionizing radiation. Classification system for service in radiation environments |
| EN 60544-5:2003 |
Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service |
| EN 60546-1:1993 |
Controllers with analogue signals for use in industrial-process control systems. Controllers with analogue signals for use in industrial-process control systems. |
| EN 60546-2:1993 |
Controllers with analogue signals for use in industrial-process control systems. Guidance for inspection and routine testing |
| EN 60554-2:2002 |
Cellulosic papers for electrical purposes. Methods of test |
| EN 60564:1993 |
D.C. bridges for measuring resistance |
| EN 60567:1993 |
Guide for the sampling of gases and of oil from oil-filled electrical equipment and for the analysis of free and dissolved gases |
| EN 60570:1997 |
Electrical supply track systems for luminaires |
| EN 60570:2003 |
Electrical supply track systems for luminaires |
| EN 60570-2-1:1995 |
Electrical supply track systems for luminaires. Mixed supply systems. Classes I and III |
| EN 60574-21:1994 |
Specification for audiovisual, video and television equipment and systems. Video tape leader and trailer for education and training applications |
| EN 60580:2000 |
Dose area product meters |
| EN 60584-1:1996 |
Thermocouples. Reference tables |
| EN 60584-2:1993 |
Thermocouples. Tolerances |
| EN 60598-1:1997 |
Luminaires. General requirements and tests |
| EN 60598-1:2000 |
Luminaires. General requirements and tests |
| EN 60598-1:2004 |
Luminaires. General requirements and tests |
| EN 60598-2-10:2003 |
Luminaires. Particular requirements. Portable luminaires for children |
| EN 60598-2-18:1994 |
Luminaires. Particular requirements. Luminaires for swimming pools and similar applications |