| Standard No |
Title of Standard |
|
| EN 61162-420:2002 |
Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ship systems interconnection. |
| EN 61164:2004 |
Reliability growth. Statistical test and estimation methods |
| EN 61166:1993 |
Specification for high-voltage alternating current circuit-breakers. Guide for seismic qualification of high-voltage alternating current circuit-breakers |
| EN 61168:1994 |
Medical electrical equipment. Particular requirements for performance. Methods of declaring functional performance characteristics of radiotherapy simulators |
| EN 61169-1:1996 |
Radio-frequency connectors. Generic specification. General requirements and measuring methods |
| EN 61169-1-1:1997 |
Radio-frequency connectors. Single, multi-series, dual-language blank detail specification |
| EN 61169-2:2002 |
Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type 9,52 |
| EN 61169-24:2002 |
Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) |
| EN 61169-31:2000 |
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling. Characteristic impedance 50 ohms (type 1,0) |
| EN 61169-32:2000 |
Radio-frequency connectors. RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling. Characteristic impedance 50 ohms (type 1,85) |
| EN 61169-33:1997 |
Radio-frequency connectors. Sectional specification for series BMA r.f. connectors |
| EN 61169-36:1997 |
Radio-frequency connectors. Microminiature r.f. coaxial connectors with snap-on coupling. Characteristic impedance 50 ohms (type MCX) |
| EN 61173:1995 |
Overvoltage protection for photovoltaic (PV) power generating systems. Guide |
| EN 61174:2001 |
Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). |
| EN 61175:1993 |
Designations for signals and connections |
| EN 61176:1994 |
Hand-held electric mains voltage operated circular saws. Methods for measuring the performance |
| EN 61179:1993 |
Specification for helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M) |
| EN 61180-1:1995 |
High-voltage test techniques for low-voltage equipment. Definitions, test and procedure requirements |
| EN 61180-2:1995 |
High-voltage test techniques for low-voltage equipment. Test equipment |
| EN 61181:1993 |
Impregnated insulating materials. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
| EN 61182-7:1996 |
Printed boards. Electronic data description and transfer. Bare board electric test information in digital form |
| EN 61183:1995 |
Electroacoustics. Random-incidence and diffuse-field calibration of sound level meters |
| EN 61184:1997 |
Bayonet lampholders |
| EN 61185:1997 |
Magnetic oxide cores. (ETD-cores) intended for use in power supply applications. Dimensions |
| EN 61187:1996 |
Electrical and electronic measuring equipment. Documentation |
| EN 61188-1-1:1997 |
Printed boards and assemblies. Design and use. Generic requirements. Flatness considerations for electronic assemblies |
| EN 61188-1-2:1998 |
Printed boards and assemblies. Design and use. Generic requirements. Generic requirements. Controlled impedance |
| EN 61188-5-1:2002 |
Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Attachment (land/joint) considerations. Generic requirements |
| EN 61188-5-2:2003 |
Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Discrete components |
| EN 61188-5-6:2003 |
Printed boards and assemblies. Design and use. Attachment (land/joint) considerations. Chip carriers with J-leads on four sides |
| EN 61189-1:1997 |
Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods and methodology |
| EN 61189-2:1997 |
Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for materials for interconnection structures |
| EN 61189-3:1997 |
Test methods for electrical materials, printed boards and other interconnection structures and assemblies. Test methods for interconnection structures (printed boards) |
| EN 61190-1-1:2002 |
Attachment materials for electronic assembly. Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| EN 61190-1-2:2002 |
Attachment materials for electronic assembly. Requirements for solder pastes for high-quality interconnections in electronic assembly |
| EN 61190-1-3:2002 |
Attachment materials for electronic assembly. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications |
| EN 61191-1:1999 |
Printed board assemblies. Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| EN 61191-2:1999 |
Printed board assemblies. Sectional specification. Requirements for surface mount soldered assemblies |
| EN 61191-3:1999 |
Printed board assemblies. Sectional specification. Requirements for through-hole mount soldered assemblies |
| EN 61191-4:1999 |
Printed board assemblies. Sectional specification. Requirements for terminal soldered assemblies |
| EN 61192-1:2003 |
Workmanship requirements for soldered electronic assemblies. General |
| EN 61192-2:2003 |
Workmanship requirements for soldered electronic assemblies. Surface-mount assemblies |
| EN 61192-3:2003 |
Workmanship requirements for soldered electronic assemblies. Through-hole mount assemblies |
| EN 61192-4:2003 |
Workmanship requirements for soldered electronic assemblies. Terminal assemblies |
| EN 61193-1:2002 |
Quality assessment systems. Registration and analysis of defects on printed board assemblies |
| EN 61194:1996 |
Characteristic parameters of stand-alone photovoltaic (PV) systems |
| EN 61195:2000 |
Double-capped fluorescent lamps. Safety specifications |
| EN 61196-2:2003 |
Radio-frequency cables. Specifications. Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation |
| EN 61196-3:1999 |
Radio-frequency cables. Specifications. Sectional specification for coaxial cables for local area networks |
| EN 61196-3-2:1998 |
Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring. |
| EN 61196-3-3:1998 |
Radio-frequency cables. Specifications. Coaxial cables for digital communication in horizontal floor wiring. |
| EN 61196-4:2004 |
Coaxial communication cables. Sectional specification for radiating cables |
| EN 61197:1996 |
Insulating liquids. Linear flame propagation. Test method using a glass-fibre tape |
| EN 61198:1994 |
Mineral insulating oils. Methods for the determination of 2-furfural and related compounds |
| EN 61199:1994 |
Single-capped fluorescent lamps. Safety specifications |
| EN 61199:2000 |
Single-capped fluorescent lamps. Safety specifications |
| EN 612:2005 |
Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet |
| EN 61202-1:2000 |
Fibre optic isolators. Generic specification |
| EN 61203:1995 |
Synthetic organic esters for electrical purposes. Guide for maintenance of transformer esters in equipment |
| EN 61204:1995 |
Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements |
| EN 61204-3:2001 |
Low voltage power supplies, d.c. output. Electromagnetic compatibility (EMC) |
| EN 61204-6:2001 |
Low voltage power supplies, d.c. output. Requirements for low-voltage power supplies of assessed performance |
| EN 61205:1994 |
Specification for ultrasonics. Dental descaler systems. Measurement and declaration of the output characteristics |
| EN 61206:1995 |
Ultrasonics. Continuous-wave Doppler systems. Test procedures |
| EN 61207-1:1994 |
Expression of performance of gas analyzers. General |
| EN 61207-2:1994 |
Expression of performance of gas analyzers. Oxygen in gas (utilizing high-temperature electrochemical sensors) |
| EN 61207-3:2002 |
Expression of performance of gas analyzers. Paramagnetic oxygen analyzers |
| EN 61207-6:1994 |
Expression of performance of gas analyzers. Photometric analyzers |
| EN 61209:1999 |
Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). |
| EN 61210:1995 |
Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements |
| EN 61211:2005 |
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1000 V. Impulse puncture testing in air |
| EN 61212-1:1996 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. General requirements |
| EN 61212-2:1996 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Methods of test |
| EN 61212-3-1:1996 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated rolled tubes |
| EN 61212-3-2:1996 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated moulded tubes |
| EN 61212-3-3:1996 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated moulded rods |
| EN 61213:1994 |
Analogue audio recording on video tape. Polarity of magnetization |
| EN 61215:1995 |
Crystalline silicon terrestrial photovoltaic (PV) modules. Design qualification and type approval |
| EN 61217:1997 |
Guide to co-ordinates, movements and scales used for radiotherapy equipment |
| EN 61219:1994 |
Live working. Earthing or earthing and short-circuiting equipment using lances as a short-circuiting device. Lance earthing |
| EN 61220:1995 |
Ultrasonics. Fields. Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment |
| EN 61221:1996 |
Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications |
| EN 61221:2004 |
Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications |
| EN 61223-2-4:1995 |
Evaluation and routine testing in medical imaging departments. Constancy tests. Method for hard copy cameras |
| EN 61223-2-5:1995 |
Evaluation and routine testing in medical imaging departments. Constancy tests. Method for image display devices |
| EN 61223-2-6:1995 |
Evaluation and routine testing in medical imaging departments. Constancy tests. Method for X-ray equipment for computed tomography |
| EN 61223-3-1:1999 |
Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of X-ray equipment for radiographic and radioscopic systems |
| EN 61223-3-2:1997 |
Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of mammographic X-ray equipment |
| EN 61223-3-3:1997 |
Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of X-ray equipment for digital subtraction angiography (DSA) |
| EN 61223-3-4:2000 |
Evaluation and routine testing in medical imaging departments. Acceptance tests. Imaging performance of dental X-ray equipment |
| EN 61223-3-5:2004 |
Evaluation and routine testing in medical imaging departments. Acceptance tests |
| EN 61228:1995 |
Method of measuring and specifying the UV radiation of ultraviolet lamps used for sun-tanning |
| EN 61229:1996 |
Rigid protective covers for live working on a.c. installations |
| EN 61230:1996 |
Live working. Portable equipment for earthing or earthing and short-circuiting |
| EN 61232:1997 |
Aluminium-clad steel wires for electrical purposes |
| EN 61234-1:1994 |
Method of test for hydrolytic stability of electrical insulating materials. Method of test for hydrolytic stability of electrical insulating materials. Plastic films |
| EN 61234-2:1998 |
Method of test for hydrolytic stability of electrical insulating materials. Moulded thermosets |
| EN 61235:1995 |
Live working. Insulating hollow tubes for electrical purposes |
| EN 61236:1995 |
Saddles, pole clamps (stick clamps) and accessories for live working |
| EN 61237-1:1994 |
Broadcast video tape recorders. Methods of measurement. Mechanical measurements |
| EN 61237-2:1995 |
Broadcast video tape recorders. Methods of measurement. Electrical measurements of analogue composite video signals |
| EN 61237-3:1995 |
Broadcast video tape recorders. Methods of measurement. Electrical measurements for analogue component video signals |
| EN 61237-4:1998 |
Broadcast video tape recorders. Methods of measurement. Analogue audio performance measurements |
| EN 61238-1:2003 |
Compression and mechanical connectors for power cables for rated voltages up to 36 kV ($iU$dm = 42 kV). Test methods and requirements |
| EN 61240:1997 |
Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection. General rules |
| EN 61241-1:2004 |
Electrical apparatus for use in the presence of combustible dust. Protection by enclosures "tD" |
| EN 61241-10:2004 |
Electrical apparatus for use in the presence of combustible dust. Classification of areas where combustible dusts are or may be present |
| EN 61241-14:2004 |
Electrical apparatus for use in the presence of combustible dust. Selection and installation |
| EN 61241-18:2004 |
Electrical apparatus for use in the presence of combustible dust. Protection by encapsulation 'mD' |
| EN 61241-2-2:1996 |
Electrical apparatus for use in the presence of combustible dust. Test methods. Method for determining the electrical resistivity of dust in layers |
| EN 61242:1998 |
Electrical accessories. Cable reels for household and similar purposes |
| EN 61243-1:1998 |
Live working. Voltage detectors. Capacitive type to be used for voltages exceeding 1 kV a.c. |
| EN 61243-2:1998 |
Live working. Voltage detectors. Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| EN 61243-3:1999 |
Live working. Voltage detectors. Two-pole low voltage type |
| EN 61243-5:2001 |
Live working. Voltage detectors. Voltage detecting systems (VDS) |