Standard No |
Title of Standard |
|
EN 61770:2000 |
Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets |
EN 61773:1997 |
Overhead lines. Testing of foundations for structures |
EN 61779-1:2000 |
Electrical apparatus for the detection and measurement of flammable gases. General requirements and test methods |
EN 61779-2:2000 |
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in the air |
EN 61779-3:2000 |
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air |
EN 61779-4:2000 |
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit |
EN 61779-5:2000 |
Electrical apparatus for the detection and measurement of flammable gases. Performance requirements for group II apparatus indicating a volume fraction up to 100% gas |
EN 61784-1:2004 |
Digital data communications for measurement and control. Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems |
EN 61788-1:1998 |
Superconductivity. Critical current measurement. DC critical current of Cu/Nb-Ti composite superconductors |
EN 61788-10:2002 |
Superconductivity. Critical temperature measurement. Critical temperature of Nb-Ti, Nb$d3Sn, and Bi-system oxide composite superconductors by a resistance method |
EN 61788-11:2003 |
Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb$d3Sn composite superconductors |
EN 61788-12:2002 |
Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb$d3Sn composite superconducting wires |
EN 61788-13:2003 |
Superconductivity. AC loss measurements. Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites |
EN 61788-2:1999 |
Superconductivity. Critical current measurement. DC critical current of Nb$d3Sn composite superconductors |
EN 61788-3:2001 |
Superconductivity. Critical current measurement. DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors |
EN 61788-4:2001 |
Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti composite superconductors |
EN 61788-5:2001 |
Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors |
EN 61788-6:2001 |
Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors |
EN 61788-7:2002 |
Superconductivity. Electronic characteristic measurements. Surface resistance of superconductors at microwave frequencies |
EN 61788-8:2003 |
Superconductivity. AC loss measurements. Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil |
EN 61797-1:1997 |
Transformers and inductors for use in telecommunication and electronic equipment. Main dimensions of coil formers. Coil formers for laminated cores |
EN 618:2002 |
Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
EN 61800-1:1998 |
Adjustable speed electrical power drive systems. Rating specifications for low voltage adjustable speed d.c. power drive systems |
EN 61800-2:1998 |
Adjustable speed electrical power drive systems. General requirements. Rating specifications for low voltage adjustable frequency a.c. power drive systems |
EN 61800-3:1997 |
Adjustable speed electrical power drive systems. EMC product standard including specific test methods |
EN 61800-3:2004 |
Adjustable speed electrical power drive systems. EMC requirements and specific test methods |
EN 61800-4:2003 |
Adjustable speed electrical power drive systems. General requirements. Rating specifications for a.c. power drive systems above 1 000 V a.c. and not exceeding 35 kV |
EN 61800-5-1:2003 |
Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy |
EN 61803:1999 |
Determination of power losses in high-voltage direct current (HVDC) converter stations |
EN 61804-2:2004 |
Function blocks (FB) for process control. Specification of FB concept and electronic device description language (EDDL) |
EN 61808:2001 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride button rechargeable single cells |
EN 61809:2001 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed alkaline secondary cells and batteries |
EN 61810-1:1999 |
Electromechanical non-specified time all-or-nothing relays. General requirements |
EN 61810-1:2004 |
Electromechanical elementary relays. General and safety requirements |
EN 61810-5:1999 |
Electromechanical non-specified time all-or-nothing relays. Insulation coordination |
EN 61811-1:1999 |
Electromechanical non-specified time all-or-nothing relays of assessed quality. Generic specification |
EN 61811-10:2003 |
Electromechanical all-or-nothing relays. Sectional specification. Relays for industrial application |
EN 61811-11:2003 |
Electromechanical all-or-nothing relays. Blank detail specification. Relays for industrial application |
EN 61811-50:2002 |
Electromechanical all-or-nothing relays. Sectional specification. Electromechanical all-or-nothing telecom relays of assessed quality |
EN 61811-51:2002 |
Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized types and construction |
EN 61811-52:2002 |
Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 20 mm x 10 mm base |
EN 61811-53:2002 |
Electromechanical all-or-nothing relays. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 14 mm x 9 mm base |
EN 61811-54:2002 |
Electromechanical non-specified time all-or-nothing relays of assessed quality. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. |
EN 61811-55:2002 |
Electromechanical non-specified time all-or-nothing relays of assessed quality. Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. |
EN 61812-1:1997 |
Specified time relays for industrial use. Requirements and tests |
EN 61817:2001 |
Household portable appliances for cooking, grilling and similar use. Methods for measuring performance |
EN 61821:2003 |
Electrical installation for lighting and beaconing of aerodromes. Maintenance of aeronautical ground lighting constant current series circuits |
EN 61822:2003 |
Electrical installations for lighting and beaconing of aerodromes. Constant current regulators |
EN 61823:2003 |
Electrical installations for lighting and beaconing of aerodromes. AGL series transformers |
EN 61828:2002 |
Ultrasonics. Focusing transducers. Definitions and measurement methods for the transmitted fields |
EN 61829:1998 |
Crystalline silicon photovoltaic (PV) array. On-site measurement of I-V characteristics |
EN 61830:1998 |
Microwave ferrite components. Measuring methods for major properties |
EN 61834-1:1998 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). General specifications |
EN 61834-10:2001 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). DTV format |
EN 61834-2:1999 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). |
EN 61834-3:2000 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). |
EN 61834-4:1998 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). |
EN 61834-5:1998 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). |
EN 61834-6:2001 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). SDL format |
EN 61834-7:2001 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). EDTV2 format |
EN 61834-8:2001 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). |
EN 61834-9:2001 |
Recording. Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). DVB format |
EN 61835:1998 |
Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format D-5 |
EN 61837-1:1999 |
Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Plastic moulded enclosure outlines |
EN 61837-2:2001 |
Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Ceramic enclosures |
EN 61837-3:2001 |
Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Metal enclosures |
EN 61837-4:2004 |
Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Hybrid enclosure outlines |
EN 61842:2002 |
Microphones and earphones for speech communications |
EN 61843:1997 |
Measuring method for the level of intermodulation products generated in a gyromagnetic device |
EN 61846:1999 |
Ultrasonics. Pressure pulse lithotripters. Characteristics of fields |
EN 61847:1998 |
Ultrasonics. Surgical systems. Measurement and declaration of the basic output characteristics |
EN 61850-3:2002 |
Communication networks and systems in substations. General requirements |
EN 61850-4:2002 |
Communication networks and systems in substations. System and project management |
EN 61850-5:2003 |
Communication networks and systems in substations. Communication requirements for functions and device models |
EN 61850-6:2004 |
Communication networks and systems in substations. Configuration description language for communication in electrical substations related to IEDs |
EN 61850-7-1:2003 |
Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Principles and models |
EN 61850-7-2:2003 |
Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Abstract communication service interface (ACSI) |
EN 61850-7-3:2003 |
Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Common data classes |
EN 61850-7-4:2003 |
Communication networks and systems in substations. Basic communication structure for substation and feeder equipment. Compatible logical node classes and data classes |
EN 61850-8-1:2004 |
Communication networks and systems in substations. Specific communication service mapping (SCSM). Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 |
EN 61850-9-1:2003 |
Communication networks and systems in substations. Specific communication service mapping (SCSM). Sampled values over serial unidirectional multidrop point to point link |
EN 61850-9-2:2004 |
Communication networks and systems in substations. Specific communication service mapping (SCSM) |
EN 61851-1:2001 |
Electric vehicle conductive charging system. General requirements |
EN 61851-21:2002 |
Electric vehicle conductive charging system. Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
EN 61851-22:2002 |
Electric vehicle conductive charging system. A.C. electric vehicle charging station |
EN 61854:1998 |
Overhead lines. Requirements and tests for spacers |
EN 61855:2003 |
Household electrical hair care appliances. Methods of measuring the performance |
EN 61857-1:2005 |
Electrical insulation systems. Procedures for thermal evaluation. General requirements. Low-voltage |
EN 61857-21:2004 |
Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for general purpose models. Wire-wound applications |
EN 61857-22:2002 |
Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for encapsulated-coil model. Wire-wound electrical insulation system (EIS) |
EN 61858:2005 |
Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS |
EN 61860:2001 |
Dimension of low-profile cores made of magnetic oxides |
EN 61866:1997 |
Audiovisual systems. Interactive text transmission system (ITTS) |
EN 61868:1999 |
Mineral insulating oils. Determination of kinematic viscosity at very low temperatures |
EN 61881:2000 |
Railway applications. Rolling stock equipment. Capacitors for power electronics |
EN 61883-1:2003 |
Consumer audio/video equipment. Digital interface. General |
EN 61883-2:1998 |
Consumer audio/video equipment. Digital interface. SD-DVCR data transmission |
EN 61883-3:1998 |
Consumer audio/video equipment. Digital interface. HD-DVCR data transmission |
EN 61883-4:1998 |
Consumer audio/video equipment. Digital interface. MPEG2-TS data transmission |
EN 61883-5:1998 |
Consumer audio/video equipment. Digital interface. SDL-DVCR data transmission |
EN 61883-6:2002 |
Consumer audio/video equipment. Digital interface. Audio and music data transmission protocol |
EN 61883-7:2003 |
Consumer audio/video equipment. Digital interface. Transmission of ITU-R BO.1294 System B |
EN 61897:1999 |
Overhead lines. Requirements and tests for Stockbridge type aeolian vibration dampers |
EN 619:2002 |
Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loads |
EN 61904:2001 |
Video recording. Helical-scan digital component video cassette recording format using 12,65mm magnetic tape and incorporating data compression (Format digital-L) |
EN 61909:2000 |
Audio recording. Minidisc system |
EN 61920:2004 |
Infrared free air applications |
EN 61921:2003 |
Power capacitors. Low-voltage power factor correction banks |
EN 61922:2002 |
High-frequency induction heating installations. Test methods for the determination of power output of the generator |
EN 61926-1:2001 |
Design automation. Standard test language for all systems. Common abbreviated test language for all systems (C/ATLAS) |
EN 61935-1:2001 |
Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173. Installed cabling |
EN 61935-2:2003 |
Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173. Patch cords and work area cords |
EN 61937-1:2003 |
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC60958. General |
EN 61937-2:2003 |
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Burst-info |
EN 61937-3:2003 |
Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the AC-3 format |