| Standard No |
Title of Standard |
|
| EN 621:1998 |
Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air |
| EN 62105:2002 |
Digital audio broadcasting system. Specification of the receiver data interface (RDI) |
| EN 62106:2001 |
Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz |
| EN 62107:2002 |
Super video compact disc. Disc-interchange system-specification |
| EN 62114:2001 |
Electrical insulation systems (EIS). Thermal classification |
| EN 62121:2001 |
Methods of measurement for minidisc recorders/players |
| EN 62122:2002 |
Methods of measurement for consumer-use digital VTRs. Electronic and mechanical performances |
| EN 62124:2005 |
Photovoltaic (PV) stand-alone systems. Design verification |
| EN 62133:2003 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from thems |
| EN 62134-1:2002 |
Fibre optic enclosures. Generic specification |
| EN 62137:2004 |
Environmental and endurance testing. Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN |
| EN 62148-1:2002 |
Fibre optic active components and devices. Package and interface standards. General and guidance |
| EN 62148-10:2003 |
Fibre optic active components and devices. Package and interface standards. SFF MU duplex 20-pin transceivers |
| EN 62148-11:2003 |
Fibre optic active components and devices. Package and interface standards. 14-pin modulator-integrated laser diode transmitters |
| EN 62148-12:2004 |
Fibre optic active components and devices. Package and interface standards. Laser transmitters with coaxial RF connector |
| EN 62148-2:2003 |
Fibre optic active components and devices. Package and interface standards. SFF MT-RJ 10-pin transceivers |
| EN 62148-3:2003 |
Fibre optic active components and devices. Package and interface standards. SFF MT-RJ 20-pin transceivers |
| EN 62148-4:2003 |
Fibre optic active components and devices. Package and interface standards. PN 1x9 plastic optical fibre transceivers |
| EN 62148-5:2003 |
Fibre optic active components and devices. Package and interface standards. SC 1x9 fibre optic modules |
| EN 62148-6:2003 |
Fibre optic active components and devices. Package and interface standards. ATM-PON transceivers |
| EN 62148-7:2003 |
Fibre optic active components and devices. Package and interface standards. SFF LC 10-pin transceivers |
| EN 62148-8:2003 |
Fibre optic active components and devices. Package and interface standards. SFF LC 20-pin transceivers |
| EN 62148-9:2003 |
Fibre optic active components and devices. Package and interface standards. SFF MU duplex 10-pin transceivers |
| EN 62149-1:2004 |
Fibre optic active components and devices. Performance standards. General and guidance |
| EN 62149-3:2004 |
Fibre optic active components and devices. Performance standards. 2,5 Gbit/s modulator-integrated laser diode transmitters |
| EN 62149-4:2003 |
Fibre optic active components and devices. Performance standards. 1300 nm fibre optic transceivers for Gigabit Ethernet application |
| EN 62149-5:2003 |
Fibre optic active components and devices. Performance standards. ATM-PON transceivers with LD driver and CDR ICs |
| EN 62149-6:2003 |
Fibre optic active components and devices. Performance standards. 650-nm 250-Mbit/s plastic optical fibre transceivers |
| EN 62150-2:2004 |
Fibre optic active components and devices. Test and measurement procedures. ATM-PON transceivers |
| EN 62153-1-1:2004 |
Metallic communication cables test methods. Electrical. Measurement of the pulse/step return loss in the frequency domain using the inverse discrete fourier transformation(IDFT) |
| EN 62153-4-2:2004 |
Metallic communication cable test methods. Electromagnetic compatibility. Screening and coupling attenuation. Injection clamp method |
| EN 62155:2003 |
Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V |
| EN 62156:2001 |
Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (digital S) |
| EN 62193:2003 |
Live working. Telescopic sticks and telescopic measuring sticks |
| EN 62196-1:2003 |
Plugs, socket-outlets, vehicle couplers and vehicle inlets. Conductive charging of electric vehicles. Charging of electric vehicles up to 250 A a.c. and 400 A d.c. |
| EN 62199:2004 |
Bushings for D.C. application |
| EN 62208:2003 |
Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| EN 622-1:2003 |
Fibreboards. Specifications. General requirements |
| EN 62211:2004 |
Inductive components. Reliability management |
| EN 62216-1:2002 |
Digital terrestrial television receivers for the DVB-T system. Baseline receiver specification |
| EN 62219:2002 |
Overhead electrical conductors. Formed wire, concentric lay, stranded conductors |
| EN 622-2:1997 |
Fibreboards. Specifications. Requirements for hardboards |
| EN 62220-1:2004 |
Medical electrical equipment. Characteristics of digital X-ray imaging devices. Determination of the detective quantum efficiency |
| EN 62226-1:2005 |
Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body. General |
| EN 62226-2-1:2005 |
Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body. |
| EN 622-3:2004 |
Fibreboards. Specifications. Requirements for medium boards |
| EN 622-4:1997 |
Fibreboards. Specifications. Requirements for softboards |
| EN 62246-1:2002 |
Reed contacts unit. Generic specification |
| EN 622-5:1997 |
Fibreboards. Specifications. Requirements for dry process boards (MDF) |
| EN 62252:2004 |
Maritime navigation and radiocommunication equipment and systems. Radar for craft not in compliance with IMO SOLAS Chapter V. |
| EN 62259:2004 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes. Nickel-cadmium prismatic secondary single cells with partial gas recombination |
| EN 62262:2002 |
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| EN 62270:2004 |
Hydroelectric power plant automation. Guide for computer-based control |
| EN 62271-100:2001 |
High-voltage switchgear and controlgear. High-voltage alternating-current circuit-breakers |
| EN 62271-102:2002 |
High-voltage switchgear and controlgear. High-voltage alternating current disconnectors and earthing switches |
| EN 62271-105:2003 |
High-voltage switchgear and controlgear. Alternating current switch-fuse combinations |
| EN 62271-2:2003 |
High-voltage switchgear and controlgear. Seismic qualification for rated voltages of 72,5 kV and above |
| EN 62271-203:2004 |
High-voltage switchgear and controlgear. Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| EN 62272-1:2003 |
Digital Radio Mondial (DRM). System specification |
| EN 62282-2:2004 |
Fuel cell technologies. Fuel cell modules |
| EN 62286:2004 |
Service diagnostic interface for consumer electronics products and networks. Implementation for IEEE 1394 |
| EN 62289:2003 |
Video recording. Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression. Format D-10 |
| EN 62300:2005 |
Consumer audio/video equipment digital interface with plastic optical fibre |
| EN 62309:2004 |
Dependability of products containing reused parts. Requriements for functionality and tests |
| EN 623-1:1995 |
Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of the presence of defects by dye penetration tests |
| EN 62310-1:2005 |
Static transfer systems (STS). General and safety requirements |
| EN 62315-1:2003 |
DTV profiles for uncompressed digital video interfaces. General |
| EN 623-2:1993 |
Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of density and porosity |
| EN 62326-1:2002 |
Printed boards. Generic specification |
| EN 62326-4:1997 |
Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification |
| EN 62326-4-1:1997 |
Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification. Capability detail specification. Performance levels, A, B and C |
| EN 623-3:2001 |
Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of grain size and size distribution (characterized by the linear intercept method) |
| EN 62330-1:2004 |
Helical-scan digital video cassette recording system using 12.65 mm (0,5 in) magnetic tape. Format HD-D5. VTR specifications |
| EN 62330-2:2004 |
Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format HD-D5. Compression format |
| EN 62330-3:2004 |
Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape. Format HD-D5. Data stream format |
| EN 623-4:2004 |
Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of surface roughness |
| EN 62356-1:2004 |
Video recording. 12,65 mm TYPE D-11 format. Tape recording |
| EN 62356-2:2004 |
Video recording. 12,65 mm type D-11 format. Picture compression and data stream |
| EN 62356-3:2004 |
Video recording. 12,65 mm type D-11 format. Data mapping over SDTI |
| EN 62358:2004 |
Ferrite cores. Standard inductance factor ($iA$dL) and its tolerance |
| EN 62375:2004 |
Video systems (625/50 progressive). Video and accompanied data using the vertical blanking interval. Analogue interface |
| EN 624:2000 |
Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats |
| EN 625:1996 |
Gas-fired central heating boilers. Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW |
| EN 626-1:1995 |
Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery. Principles and specifications for machinery manufacturers |
| EN 626-2:1996 |
Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery. Methodology leading to verification procedures |
| EN 627:1996 |
Specification for data logging and monitoring of lifts, escalators and passenger conveyors |
| EN 629-1:1996 |
Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Specification |
| EN 629-2:1996 |
Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Gauge inspection |
| EN 631-1:1993 |
Materials and articles in contact with foodstuffs. Catering containers. Specification for dimensions of containers |
| EN 631-2:1999 |
Materials and articles in contact with foodstuffs. Catering containers. Dimensions of accessories and supports |
| EN 632:1996 |
Agricultural machinery. Combine harvesters and forage harvesters. Safety |
| EN 633:1994 |
Cement-bonded particleboards. Definition and classification |
| EN 634-1:1995 |
Cement-bonded particle boards. Specification. General requirements |
| EN 634-2:1997 |
Cement-bonded particle boards. Specification. Requirements for OPC bonded particleboards for use in dry, humid and exterior conditions |
| EN 635-1:1995 |
Plywood. Classification by surface appearance. General |
| EN 635-2:1995 |
Plywood. Classification by surface appearance. Hardwood |
| EN 635-3:1995 |
Plywood. Classification by surface appearance. Softwood |
| EN 635-5:1999 |
Plywood. Classification by surface appearance. Methods for measuring and expressing characteristics and defects |
| EN 636:2003 |
Plywood. Specifications |
| EN 637:1995 |
Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method |
| EN 639:1995 |
Common requirements for concrete pressure pipes including joints and fittings |
| EN 640:1995 |
Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings |
| EN 641:1995 |
Reinforced concrete pressure pipes, cylinder type, including joints and fittings |
| EN 642:1995 |
Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes |
| EN 643:2002 |
Paper and board. European list of standard grades of recovered paper and board |
| EN 644:1999 |
Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances, expression of direction of manufacture |
| EN 645:1994 |
Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract |
| EN 646:2001 |
Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board |
| EN 647:1994 |
Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract |
| EN 648:2003 |
Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board |
| EN 649:1997 |
Resilient floor coverings. Homogeneous and heterogeneous polyvinyl chloride floor coverings. Specification |
| EN 650:1997 |
Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on polyester felt with polyvinyl chloride backing. Specification |
| EN 651:1997 |
Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification |
| EN 652:1997 |
Resilient floor coverings. Polyvinyl chloride floor coverings with cork-based backing. Specification |
| EN 653:1997 |
Resilient floor coverings. Expanded (cushioned) polyvinyl chloride floor coverings. Specification |