| Standard No |
Title of Standard |
|
| EN 654:1997 |
Resilient floor coverings. Semi-flexible polyvinyl chloride tiles. Specification |
| EN 655:1997 |
Resilient floor coverings. Tiles of agglomerated composition cork with polyvinyl chloride wear layer. Specification |
| EN 656:2000 |
Gas-fired central heating boilers. Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW |
| EN 657:1994 |
Thermal spraying. Terminology, classification |
| EN 658-1:1998 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of tensile strength |
| EN 658-2:2002 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of compression properties |
| EN 658-3:2002 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of flexural strength |
| EN 658-4:2003 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. |
| EN 658-5:2002 |
Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Determination of interlaminar shear strength by short span bend test (three points) |
| EN 659:2003 |
Protective gloves for firefighters |
| EN 660-1:1999 |
Resilient floor coverings. Determination of wear resistance. Stuttgart test |
| EN 660-2:1999 |
Resilient floor coverings. Determination of wear resistance. Frick-Taber test |
| EN 661:1995 |
Resilient floor coverings. Determination of the spreading of water |
| EN 662:1995 |
Resilient floor coverings. Determination of curling on exposure to moisture |
| EN 663:1995 |
Resilient floor coverings. Determination of conventional pattern depths |
| EN 664:1995 |
Resilient floor coverings. Determination of volatile loss |
| EN 665:1995 |
Resilient floor coverings. Determination of exudation of plasticizers |
| EN 666:1995 |
Resilient floor coverings. Determination of gelling |
| EN 669:1998 |
Resilient floor coverings. Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity |
| EN 670:1998 |
Resilient floor coverings. Identification of linoleum and determination of cement content and ash residue |
| EN 671-1:2001 |
Fixed fire fighting systems. Hose systems. Hose reels with semi-rigid hose |
| EN 671-2:2001 |
Fixed fire fighting systems. Hose systems. Hose systems with lay-flat hose |
| EN 671-3:2000 |
Fixed fire fighting systems. Hose systems. Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose |
| EN 672:1997 |
Resilient floor coverings. Determination of apparent density of agglomerated cork |
| EN 673:1998 |
Glass in building. Determination of thermal transmittance ($iU value). Calculation method |
| EN 674:1998 |
Glass in building. Determination of thermal transmittance ($iU value). Guarded hot plate method |
| EN 675:1998 |
Glass in building. Determination of thermal transmittance ($iU value). Heat flow meter method |
| EN 676:2003 |
Automatic forced draught burners for gaseous fuels |
| EN 677:1998 |
Gas-fired central heating boilers. Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW |
| EN 678:1994 |
Determination of the dry density of autoclaved aerated concrete |
| EN 679:1994 |
Determination of the compressive strength of autoclaved aerated concrete |
| EN 680:1994 |
Determination of the drying shrinkage of autoclaved aerated concrete |
| EN 681-1:1996 |
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber |
| EN 681-2:2000 |
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic elastomers |
| EN 681-3:2000 |
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Cellular materials of vulcanized rubber |
| EN 681-4:2000 |
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Cast polyurethane sealing elements |
| EN 682:2002 |
Elastomeric seals. Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| EN 683-1:1996 |
Aluminium and aluminium alloys. Finstock. Technical conditions for inspection and delivery |
| EN 683-2:1997 |
Aluminium and aluminium alloys. Finstock. Mechanical properties |
| EN 683-3:1997 |
Aluminium and aluminium alloys. Finstock. Tolerances on dimensions and form |
| EN 684:1996 |
Resilient floor coverings. Determination of seam strength |
| EN 685:1996 |
Resilient and laminate floor coverings. Classification |
| EN 686:1997 |
Resilient floor coverings. Specification for plain and decorative linoleum on a foam backing |
| EN 687:1997 |
Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing |
| EN 688:1997 |
Resilient floor coverings. Specification for corklinoleum |
| EN 689:1996 |
Workplace atmospheres. Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy |
| EN 690:1995 |
Agricultural machinery. Manure spreaders. Safety |
| EN 692:1997 |
Mechanical presses. Safety |
| EN 693:2001 |
Machine tools. Safety. Hydraulic presses |
| EN 694:2001 |
Fire-fighting hoses. Semi-rigid hoses for fixed systems |
| EN 695:1997 |
Kitchen sinks. Connecting dimensions |
| EN 702:1995 |
Protective clothing. Protection against heat and flame. Test method. Determination of the contact heat transmission through protective clothing or its materials |
| EN 703:2004 |
Agricultural machinery. Silage loading, mixing and/or chopping and distributing machines. Safety |
| EN 704:1999 |
Agricultural machinery. Pick-up balers. Safety |
| EN 705:1995 |
Plastics piping systems. Glass-reinforced thermosetting (GRP) pipes and fittings. Methods for regression analyses and their use |
| EN 706:1997 |
Agricultural machinery. Vine shoot tipping machines. Safety |
| EN 707:1999 |
Agricultural machinery. Slurry tankers. Safety |
| EN 708:1997 |
Agricultural machinery. Soil working machines with powered tools. Safety |
| EN 709:1997 |
Agricultural and forestry machinery. Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s). Safety |
| EN 710:1998 |
Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment |
| EN 711:1996 |
Inland navigation vessels. Railings for decks. Requirements, types |
| EN 71-1:2001 |
Safety of toys. Mechanical and physical properties |
| EN 712:1995 |
Thermoplastics piping systems. End-load bearing mechanical joints between pressure pipes and fittings. Test method for resistance to pull-out under constant longitudinal force |
| EN 71-2:2003 |
Safety of toys. Flammability |
| EN 713:1995 |
Plastics piping systems. Mechanical joints between fittings and polyolefin pressure pipes. Test method for leaktightness under internal pressure of assemblies subjected to bending |
| EN 71-3:1995 |
Safety of toys. Specification for migration of certain elements |
| EN 714:1995 |
Thermoplastics piping systems. Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings. |
| EN 71-4:1998 |
Safety of toys. Experimental sets for chemistry and related activities |
| EN 71-5:1993 |
Safety of toys. Chemical toys (sets) other than experimental sets |
| EN 715:1995 |
Thermoplastics piping systems. End-load-bearing joints between small diameter pressure pipes and fittings. Test method for leaktightness under internal water pressure, including end thrust |
| EN 71-6:1995 |
Safety of toys. Graphical symbols for age warning labelling |
| EN 716-1:1996 |
Furniture. Children's cots and folding cots for domestic use. Safety requirements |
| EN 716-2:1996 |
Furniture. Children's cots and folding cots for domestic use. Test methods |
| EN 71-7:2002 |
Safety of toys. Finger paints. Requirements and test methods |
| EN 717-2:1995 |
Wood-based panels. Determination of formaldehyde release. Formaldehyde release by the gas analysis method |
| EN 717-3:1996 |
Wood-based panels. Determination of formaldehyde release. Formaldehyde release by the flask method |
| EN 718:1996 |
Resilient floor coverings. Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings |
| EN 71-8:2003 |
Safety of toys. Swings, slides and similar activity toys for indoor and outdoor family domestic use |
| EN 719:1994 |
Welding co-ordination. Tasks and responsibilities |
| EN 71-9:2005 |
Safety of toys. Organic chemical compounds. Requirements |
| EN 720-1:1999 |
Transportable gas cylinders. Gases and gas mixtures. Properties of pure gases |
| EN 720-2:1997 |
Transportable gas cylinders. Gases and gas mixtures. Determination of flammability and oxidizing ability of gases and gas mixtures |
| EN 721:2004 |
Leisure accommodation vehicles. Safety ventilation requirements |
| EN 722-1:2004 |
Leisure accommodation vehicles. Liquid fuel heating systems. Caravans and caravan holiday homes |
| EN 723:1996 |
Copper and copper alloys. Combustion method for determination of carbon on the inner surface of copper tubes or fittings |
| EN 724:1995 |
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices |
| EN 725-1:1997 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of impurities in alumina |
| EN 725-10:1997 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of compaction properties |
| EN 725-12:2001 |
Advanced technical ceramics. Methods of test for ceramic powders. Chemical analysis of zirconia |
| EN 725-3:1994 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas |
| EN 725-5:1996 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the particle size distribution |
| EN 725-6:1996 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the specific surface area |
| EN 725-7:1996 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of the absolute density |
| EN 725-8:1997 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of tapped bulk density |
| EN 725-9:1997 |
Advanced technical ceramics. Methods of test for ceramic powders. Determination of untamped bulk density |
| EN 726-1:1995 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. System overview |
| EN 726-2:1996 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Security framework |
| EN 726-3:1996 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Application independent card requirements |
| EN 726-4:1995 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Application independent card related terminal requirements |
| EN 726-5:1999 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Payment methods |
| EN 726-6:1996 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Telecommunication features |
| EN 726-7:1999 |
Identification card systems. Telecommunications. Integrated circuit(s) cards and terminals. Security module |
| EN 727:1995 |
Plastics piping and ducting systems. Thermoplastics pipes and fittings. Determination of Vicat softening temperature (VST) |
| EN 728:1997 |
Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time |
| EN 729-1:1995 |
Quality requirements for welding. Fusion welding of metallic materials. Guidelines for selection and use |
| EN 729-2:1995 |
Quality requirements for welding. Fusion welding of metallic materials. Comprehensive quality requirements |
| EN 729-3:1995 |
Quality requirements for welding. Fusion welding of metallic materials. Standard quality requirements |
| EN 729-4:1995 |
Quality requirements for welding. Fusion welding of metallic materials. Elementary quality requirements |
| EN 730-1:2002 |
Gas welding equipment. Safety devices. Incorporating a flame (flashback) arrestor |
| EN 730-2:2002 |
Gas welding equipment. Safety devices. Not incorporating a flame (flashback) arrestor |
| EN 731:1996 |
Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests |
| EN 732:1999 |
Specifications for dedicated liquefied petroleum gas appliances. Absorption refrigerators |
| EN 733:1995 |
End-suction centrifugal pumps, rating with 10 bar with bearing bracket. Nominal duty point, main dimensions, designation system |
| EN 734:1995 |
Side channel pumps PN 40. Nominal duty point, main dimensions, designation system |
| EN 735:1995 |
Overall dimensions of rotodynamic pumps. Tolerances |